Melamine or Veneered Faced MDF Melamine MDF 18mm
- Loading Port:
- Lianyungang
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 100000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
size:1220*2440mm
thickness:2.5-25mm
Surface process: Satin, glossy, pearl
Description | 2.5-6mm | 6-12mm | 12-18mm | 19-32mm | |
Thickness Tolerance (Within Panel) | mm | +-0.2 | +-0.2 | +-0.2 | +-0.3 |
Size Tolerance (Within Panel) | mm | +-2mm/m max in length and width | |||
Squareness | mm | +-1.5mm/m | |||
Density | KgM3 | 780 | 750 | 730 | 720 |
Density Profile @ core | % | 90 | 85 | 85 | 90 |
Internal Bond | Nmm2 | 1.6 | 1.4 | 1.2 | 1 |
Module of Rupture | Nmm2 | 55 | 45 | 45 | 40 |
Module of Elasticity | Nmm2 | 3400 | 3400 | 3200 | 3000 |
Surface Soundness | N | 2800 | 2400 | 2400 | 2200 |
Screw Holding - Face | N | n/m | n/m | 1500 | 1400 |
Screw Holding - Edge | N | n/m | n/m | 1300 | 1200 |
Thickness Swell | % | 8 | 6 | 3 | 3 |
Water Absorption | % | 40 | 25 | 20 | 15 |
Dimensional Stability - Length/Width | % | 0.4 | 0.4 | 0.38 | 0.35 |
Dimensional Stability - Thickness | % | 6 | 6 | 3 | 3 |
Features
1.It has good acid-resistance and alkali-resistance.
2. Its performance will not change even the temperature is -25℃ or 400℃.
3. It is very easy to clean
4.Any color is available
5.It could be easy treated and edge-covered. Appropriate fro wall decoration,office furniture, household furniture,back-ground wall, kitchen cabinet
FAQ
A. how many sheets for one cubic meter?
Answer:
6mm---56 sheets/CBM
9mm---37.33 sheets/CBM
12mm---28 sheets/CBM
15mm---22.40 sheets/CBM
18mm---18.66 sheets/CBM
21mm---16.00 sheets/CBM
B. how many cubic can load for one container?
Answer:
20FT---21.4 cbm 40ft---37 cbm
- Q:What are the advantages of ecological boards and other boards?
- Consumers in the selection of such plate furniture, in addition to taking into account the color and texture satisfaction, but also from several aspects to identify the appearance of quality: whether stains, scratches, indentation, porosity, color gloss is not uniform, there is no Bubbling phenomenon, with or without local paper tear or defect phenomenon and so on. If the phenomenon of veneering cracking or damage, you can use the following methods to repair: first in the damaged place to put a damp cloth, and then put a hot iron on the hot cloth, forcing the moisture into the veneer, so that the veneer becomes tough and difficult Fragmentation. So that you can first clean the old plastic, and then coated with a layer of milk at the grass layer of wood, and then in the loose surface of the negative coated with a layer of new plastic, compaction, to be completely dry glue.
- Q:Solid wood veneer surface of the veneer how many kinds of materials
- Features for the touch smooth, with your fingers buckle the board has a thick sense of the surface wood clear but not regular, in the corner of the plate can be vaguely see 1 mm or so veneer.
- Q:Do the furniture of the woodworking board need to be plywood?
- Woodworking board furniture is generally required to veneer, one depends on the level of the material, the two woodworking board surface texture is not very rich, do paint can not do the effect, unless it is done to cover the paint can not see the background can also The There is a direct purchase has been posted on the surface of the wood board also called the ecological board.
- Q:What are the advantages and disadvantages of decorative panels?
- Melamine plywood has the advantage of: the surface is flat, because the plate double-sided expansion coefficient of the same and not easy to deformation, bright colors, the surface is more wear-resistant, corrosion-resistant, affordable.
- Q:What is a stone trim? Home stone panel okay?
- We all know what is the stone, in recent years, with the development of the times, the improvement of living standards, stone industry is also advancing with the times, in the constant high quality of life close to the variety of stone variety, Making the use of slowly in the decoration of the stone more and more common, and gradually become a trend of the trend.
- Q:What is the difference between a whitewash board and a veneer?
- It is made of natural wood slicing or peeling into the thickness of 0.2-1mm thin slices, after the parquet paste in the plywood, fiberboard, particleboard and other substrates made of.
- Q:How many types of wooden lines
- Second, the protective effect, especially in the panel of the mouth of the mouth, if not to protect the line, the future use of the process of the surface of the panel can easily be scratched, affecting the use.
- Q:What is the difference between veneer furniture and veneer furniture?
- Imitation solid wood furniture: the so-called imitation solid wood furniture from the appearance point of view is the solid wood furniture, wood natural texture, feel and color are almost the same as solid wood furniture, but in fact the wood and wood-based panels mixed with furniture, both side panels, , Gussets and other components with veneer veneer of the particleboard or MDF fiberboard, doors and drawers are used solid wood. This process saves the wood, reduces the cost, but compared with pure solid wood furniture, environmental protection and durability is still inadequate.
- Q:What is the paper for pvc plywood?
- Search the veneer of the paper after three o-melamine glue 2 and a g of some additives after impregnation, that is, three j polyamide impregnated paper.
- Q:What are the quality requirements for decorative panels?
- Decorative panels - the construction quality requirements: First, first of all depends on the floor of the panel is flat, solid Second, depends on the panel texture direction or pattern is not one to third, look at the face of the panel is empty , Look around the panel is not sticky
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Melamine or Veneered Faced MDF Melamine MDF 18mm
- Loading Port:
- Lianyungang
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 100000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords