Melamine MDF Board Wood Grain Melamine MDF
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 100000 m³/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
size:1220*2440mm
thickness:2.5-25mm
Surface process: Satin, glossy, pearl
Description
Thickness Tolerance (Within Panel) | mm | +-0.2 | +-0.2 | +-0.2 | +-0.3 |
Size Tolerance (Within Panel) | mm | +-2mm/m max in length and width | |||
Squareness | mm | +-1.5mm/m | |||
Density | KgM3 | 780 | 750 | 730 | 720 |
Density Profile @ core | % | 90 | 85 | 85 | 90 |
Internal Bond | Nmm2 | 1.6 | 1.4 | 1.2 | 1 |
Module of Rupture | Nmm2 | 55 | 45 | 45 | 40 |
Module of Elasticity | Nmm2 | 3400 | 3400 | 3200 | 3000 |
Surface Soundness | N | 2800 | 2400 | 2400 | 2200 |
Screw Holding - Face | N | n/m | n/m | 1500 | 1400 |
Screw Holding - Edge | N | n/m | n/m | 1300 | 1200 |
Thickness Swell | % | 8 | 6 | 3 | 3 |
Water Absorption | % | 40 | 25 | 20 | 15 |
Dimensional Stability - Length/Width | % | 0.4 | 0.4 | 0.38 | 0.35 |
Dimensional Stability - Thickness | % | 6 | 6 | 3 | 3 |
Features
high bending strength
low formaldehyde emission
little linear expansion coefficient
strong nail holding
moisture proof and easy work , moisture content 4%~6.6
FAQ
A. how many sheets for one cubic meter?
Answer:
6mm---56 sheets/CBM
9mm---37.33 sheets/CBM
12mm---28 sheets/CBM
15mm---22.40 sheets/CBM
18mm---18.66 sheets/CBM
21mm---16.00 sheets/CBM
B. how many cubic can load for one container?
Answer:
20FT---21.4 cbm 40ft---37 cbm
- Q:Do closet, wardrobe board, what plastic good?
- After all, posted a layer of panels, more than a plastic, more pollution sources. There are direct blockboard brush varnish, solid wood side of the edge. Good blockboard texture is also very beautiful!
- Q:Melamine plywood paint, paint the total out how to do
- Diao paint a lot of reasons, depends on how you specifically out of law.
- Q:Decoration house, mud carpenter approach, the need to pay attention to what the problem?
- 3, before the woodworking approach, the board advanced field, a closer look at whether the board is consistent with the contract, whether it is genuine. The following are the same as the "
- Q:What are the shortcomings and advantages of oak plywood?
- Oak furniture shortcomings: oak material because the comparison in the country less, so the relatively high price of oak furniture. Oak furniture, hard texture, in fact, it is its shortcomings, so that the moisture in the furniture is not easy to completely dry, a long time more easily rotten. Used to make furniture is a very good material, the appearance of unique and beautiful, on the grade.
- Q:Do the closet and the door, joinery outside the paste Boeing soft leather and veneer in the performance, quality, visual What is the difference?
- Big core board paste Boeing film This process is already very old, is not recommended to use. Want to do the wardrobe with particleboard, no paint, and then with the finished door. Large core board decorative panels, decorative panels are generally posted outside the cabinet, Boeing film stickers inside. Use the place is not the same, if the decoration inside the paste also, very little so dry.
- Q:The difference between eco-board and blockboard
- The ecological plates in the narrow sense refer only to the melamine trim panels in which the substrates used are multi-layer solid wood (plywood), blockboard (eg Malacca, fir, paulownia, poplar, etc.). Mainly used in furniture, cabinets wardrobe, bathroom cabinets and other fields.
- Q:Woodworking desk, too long, paste the panel after the varnish will have how to deal with seams ah
- Called the oil workers to pay the color of the cheapest, followed by a certain draw after the imposition, the most expensive is the paste veneer.
- Q:How about the double-pearl board?
- The thickness of the plate is 12mm, 16mm, 18mm, 20mm, 25mm, etc., can also be customized according to the different needs of consumers product size.
- Q:Wooden door surface panels (multi-layer board) is a solid wood door or solid wood composite door?
- According to the solid wood doors are not posted, solid wood doors of the process is generally refers to the section, or pure wood.
- Q:Will the fire board be used as a plywood for furniture?
- of course. And is a good choice.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Melamine MDF Board Wood Grain Melamine MDF
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 m³
- Supply Capability:
- 100000 m³/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords