Q:What kind of protective film is suitable for stoving varnished product?

Stoving varnish is a kind of high-light product. It can be covered with static film of low adhesion. We have specific protective films for specific stoving varnished, high-light and plastic products.

Q:Is it necessary to peel off the protective film on the refrigerator?

Of course it's necessary.

Q:Fire door finished surface with a layer of protective film is not good to tear

There are 3 reasons for the poor protection of the membrane. First, the product has been placed too long. Second the material is placed too long. Third, environmental impact (high temperature and wind blowing).

Q:What materials is rotective film made from?

PP material: material used in plastic bags that we often use. The chemical name of PP is polypropylene. PVC material: PVC material is more thick but its light transmittance is not good. PET material: the chemical name of the film made from this kind of material is polyester thin film. AR material: AR is a kind of synthetic material, generally composed of three layers--the silica gel as the adsorptive layer, PET as the middle layer and outer layer as the special processed layer. Special processings usually can be divided into two kinds-- AG processing and HC processing. AG processing is anti-glare processing, adopted when making matte protective film. HC processing is hard coating processing, used on protective film of high light transmittance.

Q:The site is now waiting for acceptance, but the door on the layer of protective film to tear up a lot of trouble, one day only to tear two or three, now with a hair dryer blowing while tearing effect is not significant, this is the door looks like plastic doors, the speed for master pointing.

Hair dryer blow, and then remove or use wood shovel, rubber mark can be erased with solvent oil.If the area is not large, you can use banana water up, and then wipe a clean ball on it.

Q:Bad smell generated from the electric baking pan after its protective film is destroyed. Is the pan still usable?

The smell is toxic. The non-stick interior coating is destroyed. I was told that things like is unusable soon or later. You'd better replace it as early as possible. It's destroyed by the spatulas.

Q:How many kinds of glue do you want to protect the film?

The basic acrylic oil, glue and water gel, as well as silicone and rubber. The performance of silica gel is better, exhaust performance and stability are higher.

Q:How many kinds of electroplating protective film are there?

Electroplating protective film is often used in gas deodorization, liquid decolorization or cleaning of the organic contaminations in plating bath in particular. Products like aluminium products can use method of anodization. There will form a layer of protective film of crystalline aluminium oxide.

Q:Can laptop TouchPad be covered with protective film?

I used protective film to coat the wrist rest··and the touchpad too. But I found the touchpad got slow to respond·

Q:What to do if the protective film on aluminium alloy is very difficult to remove?

1