Matching Mixer JS1500 Construction Machinery
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Matching Mixer JS1500 Construction Machinery
BRIEF INTRODUCTION
Theory productivity 75 m3/h Matching mixer JS1500
Discharging height 3.8 m Aggregate metering precision ±2％
Cement weighing precision ±1％ Water weighing precision ±1％
Additive weighing precision ±1％
Control room 6 m2 Aggregate hopper volume 15m³×4
Cement silo: 100t (optional) Cement screw conveyor: Ф219 (optional)
Floor area 30m×12m Total power: about 105 kW(Not including screw conveyor)
Gross weight :33 tons(not including screw conveyor and cement silo)
PART III: TECHNICAL DATA
Item | Specification |
1 | Aggregate Supply System is composed of aggregate bin, frame, weighing hopper, aggregate conveyer and sensors. 1、 Aggregate bin ⑴ Volume: 15m3×4 ⑵ The feeder: 8 ⑶ Cylinder: bore 100 stroke 300 (with solenoid valve) 8 pieces 2、 Weighing hopper: ⑴ Volume: 5000L ⑵ Measure mode: measure together ⑶ Sensor: STL-2000 qty: 4 Amcell America ⑷ Measuring precision: ±2% 3、 Belt conveyor with cleaner ⑴ Belt specification: 650mm ⑵ Belt speed 4. Driven drum:CG-φ320*750Z Electric power: 7.5kW 5. Vibrator: MVE200/3 Oli-wolong Power: 0.15kW 4 sets |
2 | The elevating system 1） Electric Windlass: Power: 22kW 2） Convey capacity: 2400L 3） No Temporary storage hopper 4） Discharging material gas cylinder: 5) Windlass engine: XWN39-17-22 |
3 | Mixing System Model: JS1500/Twin-shafts horizontal forced type Charging volume: 2400 L Discharging volume: 1500 L Discharging height: 3.8m Motor power: 30kW×2 Mixing blade、 lining board: wear resistance material System instruction: Planetary gear reducer, small volume,high efficiency,high reliability. Lining board and material of blade are chrome wear-resisting cast iron, reasonable design of angle and quality mixing efficiency,quick speed and long service life. Discharging gate is controlled by hydraulic oil pump. There are three stick points and no noise. Overweight design and good damping |
4 | Mixing Platform Discharge height 3.8m Mixing platform electromagnetism valve Stairway, platform, handrails |
5 | Cement weighing system Cement weighing system is composed of cement weighing hopper, pneumatic butterfly valve, sensors and so on. Cement weighing system Volume: 700L Weighing range: 0～700 kg Weighing precision: ±1% Sensor: SSB-Ⅲ-500 Qty.: 3 Amcell America Pneumatic butterfly valve: BV1F300S Vibrator MVE100/3 Oli-wolong Power: 0.09kW |
6 | Water weighing system Water weighing system is composed of pool (made by customer themselves), water pump, pneumatic butterfly valve and so on. Volume: 500L water supply pump: QY50-18-4kW Pipe pneumatic ball valve Discharging pneumatic butterfly valve Weighing precision: ±1% |
7 | Additive weighing system including the box and pipeline Liquid additive weighing system is composed of additive storage box, additive weighing hopper, pneumatic butterfly valve and sensor and so on. 1.Additive supplying pump power: GISG25-125-0.75KW 2. Pneumatic three way ball valve 3. Additive storage box: 2 m3 4. Weighing precision: ±1% 5. Weighing hopper pneumatic butterfly Volume: 40L
|
8 | Pneumatic system is composed of air compressor, gas cylinder, electromagnetic and pneumatic components. 1) Air compressor: power: 11kW 2) Electromagnetic: a) Main tower electromagnetic valve of pneumatic control case b) Cylinder electromagnetic valve c) Cement break electromagnetic valve quantity is same as powder storage 3) Air supply disposal components |
9 | Control System 1. The operation is integrated with management .It is easy and convenient to operate. 2．The batching system is controlled by the microcomputer. 3．The operating data of the mixing plant can be saved for more than ten years for the convenience of setting management. 4．The formula which can reach more then dozens can express by the figures for the convenience of distinguishing. 5. It has the function of error analysis and automatic checking. 6. Under the condition departing from the automatic control .The manual operating system can finish the control of the mixing plant such as batching, mixing discharging. 7. The heavy-current part of the system is separated from the weak-current part, so it enhances the ability of anti-jamming. Easy to maintain. 8. Equip with printer 9. Equip with air-condition 10.Control room: 6m2 System instruction: The main hardware of this system adopts Germany Siemens products with advanced performance, high reliability and beautiful exterior. Console adopts man-machine engineering design, comfortable operation. |
12 | Screw conveyor (optional) 1. Model:∮219 2. Conveying capacity: 45t/h 3. Power: 11KW 4. Quantity: ∮219 |
13 | Cement silo (optional) 1. Model: Piece type easy to load and transport 2. Capacity: 100t Quantity:1 units |
We have the following services:
1. installation, debugging, operators trainning;
2. maintanence:
A. when trainning your operators, our engineers will give them advice on how to operate the machines correctly;
B. we will send you the operation manual which can help you operate the machins properly, it can also help you to solve
the common problems;
C. Call us at any time if you have problems about our concrete plants;
D. If needed, we will send engineers to your site to solve your problems.
3. providing documents needed for your customs clearance, like commercial invoice, packing list, certificate of origin etc;
4. spare parts supply;
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products offered byOKorder.com are carefully selected from China's most reliable manufacturing enterprises. Through its ISO certifications, OKorder.com adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some Concrete Machinery according to customersrequest?
A4: Yes, we can produce Concrete Machinery according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:OKorder and our manufacture both have overseas branches all-around of world, IF needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:What is the concept of on-site concrete mixer station
- It's not a simple blender. It's not a simple blender. But an intensive production scale small and use the site concrete, according to the need to establish a set of automatic production line, divided into according to production output per hour 35 square (45), 50 square (60), 75 (90), 90 (120), the standard station with laboratory; To establish the corresponding scale of the stations according to the construction needs; This kind of mixing station can not only guarantee the quality of concrete, but not the time factor, which guarantees that 24 hours can produce the concrete needed for the site. He needs to have about 30, 000 or so in demand, and the site is suitable. This has low cost, convenient site management and mutual benefit!
- Q:What constitutes the js750 concrete mixing station
- pecific configuration can be cut can be numerous js750 hosts are commonly used to climb a pipe loading, the concrete quality requirement is not high do not need automatic batching only buy a belt bucket host to climb to go, with a tractor modified small forklift about yao to climb add material in the bucket.
- Q:The main components of a mixing station
- Feeding system: aggregate bucket, aggregate weighing hopper, flat belt machine, inclined belt conveyor. Mixing system: the main machine is a double-deckshaft mixer, reducer, cement weighing hopper, water and additive weighing hopper. Cement supply system: cement warehouse, screw conveyor, air compressor, screw electronic. Automatic water supply system: water tank, pump, pipe. Electrical operating system: computer console, electric control cabinet, operation room. Operation control system: microcomputer control or manual control.
- Q:Classification of concrete mixing stations
- There is the distinction between level 1, level 2, level 3. Because some projects, especially the project of the state, are required to provide the units of concrete, and the quality is low because of the low quality. There is a clear list of bids in general.
- Q:Does the concrete mixing station name have the name of the businessman concrete
- Original concrete is the construction unit oneself mix, the existing specialized manufacturer presses the need to produce concrete, the product that produces is concrete.
- Q:What are the facilities of the concrete mixing station
- One. Stir the host The mixing machine is divided into strong mixing and self-falling stirring. The powerful mixer is the mainstream in the domestic and foreign mixers, it can stir the liquid, semi-dry hard and hard and so on. The main mixing liquid concrete of the self-falling mixer is very rarely used in the mixing station. Two. Material transport system The material transport consists of three parts. Aggregate conveying; There are two ways of conveyance and belt conveyance. The advantage of hopper promotion is that the area is small and the structure is simple. The advantage of belt transport is that the transport is large, efficient and low. The belt conveyor mainly applies to the mixing stations that have aggregate storage, thereby increasing the productivity of the mixing stations. Powder conveying; The powder used in concrete is mainly cement, fly ash and mineral powder. The most commonly used powder conveyors are conveyors of screw conveyors, and the large mixing buildings are carried by pneumatic conveyer and scraper. The advantages of screw transport are simple structure, low cost and reliable use. Liquid transport mainly refers to water and liquid admixtures, which are delivered separately by water pumps.
- Q:How to choose a good concrete mixer station?
- The concrete mixing station of choose and buy should focus on quality and quantity. Some users choose and buy when the concrete mixing station, don't know how should choose the equipment, now there are goods on the market of concrete mixing station, concrete mixing station, concrete mixing station. Users should choose different devices and different type of concrete mixing stations according to their own situation.
- Q:What is the concrete of the mixing station?
- I am at the work station, the concrete mixing plant is operating goods, use the material such as cement, fly ash, sand, water reducing agent in strict accordance with the provisions of the state standard the ratio of mixing, through concrete truck mixer (commonly known as "car" river) transportation to the construction site, recycled concrete pump for handlebar concrete on the building site. For building products safety, now the big building construction are banned to mix concrete, concrete supply must to the recognition of concrete mixing station to buy, hope to help you.
- Q:What are the advantages of HZS series of concrete mixing stations
- Is economical and practical type of small and medium sized concrete mixing station mixing plant, usually more than township, built in the smaller areas, compared with large mixing station the installed it easier, and covers an area of small, transportation is convenient.
- Q:The average commodity concrete is mixed with a day to use how much fly ash
- What is the amount of cement in the concrete mixing station? This is based on the different levels of the concrete mix. Here is a different grade of concrete ingredients: Note: 1. The mix of concrete and concrete shall be carried out in uniform ratio of gravel and slump. In one project, the C40 is mixed with ordinary cement, and according to the proportion design, the maximum amount of coal ash can replace 40% of the cement consumption.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Matching Mixer JS1500 Construction Machinery
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
