Order On-line Tracking
1.18 months warranty days
2.LCD monitor style.
3.Size of swivel is 22MM
4.different kinds of colour for your choice
5. with colourful packing
6. Detection distance:: 0.4-2.5M rear, 0.4-1.5M front
7. Rated voltage: 12V
8. Operation voltage range: 10.5-16V DC
9. Rated current: 20-200MA
10. Ultrasonic frequency: 40 KHZ
11. Operating temperature: -30- +70
Connect the power wire of the control box correctly.
Connect the monitor with the control box. Put the shift lever to reverse gear to start the system up, and the monitor will send a sound of warning. For LED or LCD series, the displays show “--” or “.” At the same time. It indicates the system is under detecting status.
After the installation of sensors, adjust the direction to the correct, then arrange the wires in good order. Connect one sensor with corresponding outlet in the control box. It can operate normally if person stands in 1.0M. Check each of the sensors separately according to this way. Then connect all of them with the control box.
Enter into the back gear to make the system working. Lay a obstacle behind the car, and change the distance and orientation to test the system. If the system with 6-8 sensors is installed, switch off the power after finishing the test of reverse detection, move the obstacle to the front of the car, then apply the brake to test the front detection.
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|