Q:Processing center processing oblique oval

If the oval deformation is very powerful, there are several possibilities, the arbor is not installed, or the arbor itself is not good, causing the swing is too large, naturally processed out of the oval.

Q:The difference between the heart and the milling machine, I feel like almost! Is not the diameter of the processing machine to be smaller?

Turning and milling machining center is the turret drive tool movement, the spindle and the workpiece does not move or just rotate.

Q:Your processing center knife library stop position is not in place how to solve?

The spindle box does not return to the tool change point or tool change point drift, solution, re-operation of the spindle box movement, so that it to the tool change point position and re-set the tool change point.

Q:Which big god gets advice, cnc processing center g code g28g98g99 in the end what is the meaning. To be detailed. Have labor Thank you

G98: After drilling a hole, the tool returns to the initial height (Z height in front of the drilling command) Move quickly to the next hole Continue drilling

Q:How to process taper holes with machining centers?

The first is to use the NC KM head, by adding a V axis, or the axial movement of the spindle into a radial movement of the blade device, the G01 two-axis movement (Z axis + V axis; or Z axis +

Q:Machining center milling depth of 10 mm for planar programming

Fagordnc software. If you want a computer to communicate with multiple CNC machines at the same time, use http://www.multi-dnc /trial/m-disk.exe.

Q:CNC machining center g51 how to use

G51 P2 that the program origin for the zoom center, the graphics zoom twice;

Q:850 processing center servo motor how many watts

Z axis to see if there is no weight, and some companies will not be equipped with heavy.

Q:What are the advantages of woodworking centers?

The difference is mainly in the control mode.

Q:What is the difference between a CNC milling machine and a machining center?

The biggest difference with the CNC milling machine is that the machining center has the ability to automatically exchange machining tools. By installing different tools on the magazine, the tool can be machined in a single fixture by automatically exchanging the tool.