LTE 4G 1800 Amplifier signal repeater booster full kits

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
Supply Capability:
5000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Application photoApplication:
To expand signal coverage of 2G/4G LTE FDD- 1800MHz  which signal blind areas where signal is weak or unavailable.
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !

Now you can reach everywhere with signal boosters!

1. 300~1500 square meters indoor coverage.
2. Frequency bandwidth of LTE-1800MHZ.
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .

8. Supports up to (30) users / calls simultaneously.

Indoor coverage : 300-1500 m2
Frequency Range :1710-1785MHz,1805-1880MHz
Up-link Gain: 60dB
Down-link Gain: 65dB
Output Power UL: 20dBm, DL: 20dBm
Band Flatness: ≤±6
ALC: 31dB @ 0.1dB step
Time Delay: 1 us
Spurious Emission: Out-Band ≤-36dBm
Power Supply: AC110V~220V to DC+5V/2A
Working Temperature: -25 to+55 C

Humidity: 5-95%

1. Repeater unit with power supply.
2. High Gain outdoor antenna.
3. Omni indoor antenna.
4. 5m and 15m RF cables.
5. A manual.

Warranty & Return Policy:

Warranty covers replacement within 12 months.

2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.

3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.

4. All unauthorized, no reason, etc. returns are subject to 10% restocking fee.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How does ZigBee implement the routing relay function?
For example, with FastZigBee protocol, to ensure AB two terminal configuration can make two normal communication, in the distance is too far away to do communication, as long as the AB into the middle of the routing node, you can return to normal communication points, other configuration does not need to be modified.
Q:What is the walkie talkie relay station?
Radio relay station is used to increase the distance of the radio communication equipment, when two walkie talkie over a distance range of radiation radio signals, walkie talkie will not receive effective signal, then you must use the walkie talkie relay station. The function of the relay station is to forward the received signal and complete the relay between the signals.
Q:Relay function of wireless router
The relay (repeater) will spread the relay wireless network coverage.For example, neighbors have a router, but the distance from the middle or more than 3 of the wall, the signal is weak. You can connect to a router with a relay so that the wireless network can cover the required range of activities
Q:What's the communication pad for?
Digital trunk board (divided into 2B+D and 30B+D), is through the 1 2M optical fiber data, provides 30 voice channels, equivalent to 30 analog telephone lines, the general situation is the use of large enterprises, hotels, and engineering units; E&M simulation of relay board is mainly used in the networking, analog relay.The above is basically the switch, the general needs of the relay plate.
Q:How do you use a wireless router to connect WIFI signals to another wireless router?
The second router refers to the router that routes the line from the first routerStep 1 connect the external network to the first router, and set the method to set the default URL of the first router to as per the instruction manual
Q:Does the use of a higher router as a relay affect the network speed?
This is only within a certain range and may not be very effective (not very much).
Q:How to relay submarine fiber optic cables?
At present, the number of fiber pairs in each submarine cable is limited to 4 or 8. In addition, the housing standard repeater can accommodate 8 fiber amplifiers, but the 4 is enough for optical fiber, and the shell model can accommodate the repeater optical amplifier this is more than 8 times, is suitable for occasions of fiber. Amplifiers with relay submarine cables are typically about 50 kilometers apart, about half the length of the land long haul fiber optic cable system. This is necessary because the length of the submarine optical cable system is often thousands of kilometers, much longer than that of terrestrial optical fiber cables. In submarine optical fiber cables, the gain of optical amplifiers should be kept at a low level, usually only about 10dB, which is to control the spontaneous emission noise and nonlinear effects of amplification, and these effects are accumulated along the length of optical fiber cables. The input power of high and low gain power is helpful to balance the entire spectrum of the optical amplifier, this point is very important, because after the 100 amplifier, small gain difference will accumulate a huge problem. The Raman amplifier in the last section of the optical fiber can not only amplify the signal of the optical amplifier, but also realize the gain equalization in the whole WDM spectrum. The current submarine optical fiber cable system uses only C band erbium doped fiber amplifier, but because of the increase of single channel rate and multiplexing wavelength, the capacity of submarine WDM system has been greatly improved. Early WDM submarine fiber optic system, each fiber transmission 4 2.5Gbit/s channels, such as 4 pairs of optical fiber, the total capacity
Q:After setting Repeater mode, the relay effect is not obvious or unsuccessful, what can I do?
In Repeater mode, the wireless signals, SSID, and encryption modes sent by TL-WR700N are exactly the same as those of the main AP, so after setting the Repeater, the wireless cannot search for the default TL-WR700N of the SSID. In the Bridge mode, the TL-WR700N can set its own SSID and encryption mode for wireless signals, which can be different from the main AP.TL-WR700N sets the Repeater mode as a relay amplification for the front-end wireless device, first establishing a wireless connection with the main AP, and then sending the wireless signals of the main AP,The TL-WR700N setting Bridge mode can also extend wireless coverage by first establishing a wireless connection with the main AP, then TL-WR700N sends its own wireless signals for client connections
Q:What's the difference between repeaters and hubs?
The difference between repeaters and hubs is the number of cables connected to the device. A repeater usually has only two ports, and a hub usually has 4 to 20 ports or more.
Q:What is the function of relaying?
Simple to say, is used to amplify the signal in the repeater in the wire, the maximum transmission distance theory of stable five cable general is 90 meters, and general in the brand is only 70~80 meters, and then will the loss. At this point, if we still have to use ordinary five - class twisted pair transmission, we need to put a repeater in the 80 meter position, so that the line can work steadily in the length of 160 meters.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range