LPG Forklift Truck ( engine, 2.5Ton)
Type:Powered Pallet Truck
Load Capacity:1T - 5T
Min. Turning Radius:2280
Min. Width of Right Angle Stacking:4110
Min. Width of Right Angle Channel:2100
Origin:Qingdao City, Shandong
Production Capacity:10000 PCS/Year
1, Standard configuration
Load capacity: 2500kg
Load center: 500mm
Lift height: 3-6.5M
Engine type: NISSAN K21
CST Penumatic tires
2, Mast available
2 stage from 3.0m to 5.0m
2 stage FFL from 3.0-5..0m
3 stage FFL from 4.5-6.5m
3, Engine available
Name: NISSAN K21
Original: Made in Japan
Rated H.P.: 32KW/2250rmp
Max. torque: 144N.m/1600rpm
|1||Characteristics||Fuel type||LPG & Gasoline|
|5||Full free lift height||mm||135|
|7||Mast tilting angle||Front/Rear||Deg.||6/12|
|8||Min. turning radius||mm||2280|
|9||Min. width of right angle stacking channel||mm||4110|
|10||Min. width of right angle channel||mm||2010|
|12||Overhead guard height||mm||2100|
|14||Performance||Max. travel speed||Full load||km/h||18|
|15||Max. lift speed||Full load||mm/s||500|
|16||Max. traction power||Full load||KN||18|
|Dimensions||Total length||With fork||mm||3650|
|18||Total length||Without fork||mm||2580|
|20||Mast extended height||mm||4220|
|21||Mast lowered height||mm||2040|
|28||Motor||Model ||ISUZU C240|
|30||Rated torque ||N.m/r.p.m||137.7/1800|
|33||Fuel tank capacity||L||60|
|35||Operating pressure ||Mpa||18.5|
- Q:How do you use the gta5 forklift, the one that carries the container on the dock
- Then press CTRL to push the arm to the container and press E.I hope my answer is useful to you.
- Q:Learn the forklift truck, will you be tired in the future?
- Generally not tired if you usually have a fork in the shelf and you can get a good habit of driving a forklift
- Q:Which is better, solid forklift tyres and inflatable forklift tyres?
- A forklift truck is a solid tire or pneumatic tyre? The characteristics of the solid tire of the forklift truck: good wear resistance and a life span of 3-4 Double, no rupture (unless the tyre quality problem)
- Q:What's the tonnage of the forklift
- Container forklift The engine is powered by diesel engine, carrying capacity of 8.0 ~ 45.0 tons, which is divided into empty box, heavy box and container. Apply to container handling such as container yard or port terminal.
- Q:The forklift truck can't be combined for a license
- No, the loading machine belongs to the engineering machine, the forklift truck belongs to the logistics machinery, different industries. And the loading machine is in the security check, can run an operation card, the forklift truck is returned to the quality inspection tube.
- Q:How do you drive the forklift
- (1) check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective. (4) the forklift should check the pressure and the temperature is normal. (5) after the operation of the forklift truck, it should also check the leak and replace the sealing part in time. (6) the electric cylinder forklift should check the contents of the electric car and inspect the circuit of the electric bottle forklift.
- Q:What's the matter with forklift
- 5) forklift rack and gear meshing clearance adjusting too close, if this is the case, the fault diagnosis and discharge should be removed when the rocker arm in steering gear, if you turn the steering wheel to feel heavy, you should adjust the rack and gear fan, the progress of the screw rod bearing. If it feels unevenly or inside, check the screws, steel balls, pipe clips, rack and bearings without any roughness or damage. Repair or replace when necessary. Ruled out the above failure, forklift can normal operation, should pay more attention to forklift truck is in failure, timely troubleshooting, not small fault assemble into a big failure. All mentioned above is a counterweight forklift driving type steering mechanism, balance weight used in most hydraulic forklift steering, so normally is smaller and lighter. But the same as the material handling tools, electric stacker, electric truck steering system is how China chose, popular models is based on the principle of the leveraged direct mechanical twisting to handle drives the driving wheel reverse adjustment, so very tired very difficult operation. Also, so make working forklift for this kind of fatigue and developed an EPS electronic power steering system, with the motor drives the driving wheel steering, operators only need to turn the handle to realize positioning can be easily. In detail, the electronic steering system principle Outlines of course
- Q:What is the tonnage of a few tons of forklifts?
- There are more than 10 tons of forklifts in the harbor, as well as the container size forklift. The standard forklift truck is usually one ton, two tons and three tons. Special choice in addition to the standard forklifts, forklift with a container for container operations, points into the tank container forklift forklift (2 ~ 5 t), the empty container stacking forklift (7 ~ 10 t) and a tank full of loading and unloading container forklift (20 ~ 42 (t). Each rating of the forklift truck crane quality refers to the cargo weight within the standard load center distance forklift, forklift truck door frame, vertical lifting by forklift standard lifting height (hoisting height provisions in China standard is 3000 mm) when lifting the quality of the goods. User when choosing forklift tonnage, therefore, should be based on the center of gravity of the loading and unloading goods compared with the size of the forklift truck standard load center, such as cargo center of gravity is equal to or less than the standard forklift load center distance, is the selected forklift lifting quality rating equal to or higher than the goods quality. If the center of mass of the cargo is greater than the standard load center of the forklift truck, the loading curve of the forklift truck will be determined according to the loading curve of the forklift truck.
- Q:What is the principle and function of the forklift differential
- Forklift differential principle: is mainly composed of several gear (driving wheel polo shape gear), plate Angle gear, planetary gear and driven gear to organize, mainly using planetary gear to the rotation and revolution of the conversion principle of actual differential role to implement the revolution and rotation when turning.
- Q:What certificate is required to train the forklift
- A copy of the id card, two on the back. A copy of the diploma, There are four photos of the white background, the body check. The application form.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range