Q:What kind of protective film is suitable for stoving varnished product?

Whatever kinds of protective film are all okay!

Q:How can the protective film on the outer layer of the stainless steel thermos cup be removed?

The protective film on the outer surface of the stainless steel thermos cup can be removed by the following methods:1, with paper towels stained with some alcohol (preferably with industrial alcohol, not to use medical also OK) wipe, and then rub a few stainless steel protective film on the clean.2. Use nail polish. The usage is similar to alcohol acetone. The effect is also good. Washing water does not require quality, good or general, as long as you can wash off all nail polish.

Q:Is there any way to tear off the protective film on furniture that is used for too long?

Blow the film with electric hair drier for half an hour. When the film gets soft, you can gently pull it by hands to tear off the whole film.

Q:What are the differences between PE protective film and PE release film?

PE protective film is used for the primary protection of electronic products when they leave the factory while PE release film is used as disposable consumable to protect the raw materials when wastes is discharged during processing.

Q:How to easily tear protective film down from the refrigerator?

Try to use electric hair drier at low gears to blow the film from a certain distance. When heated, the film will expand. It will make it easier to tear off the film.

Q:What are the differences between a LCD protective film for laptop and a protective film for mobile phone ?

The functions of a laptop LCD protective film: 1. Ordinary films: Ordinary films only protect the screen from dust and scratch. This kind of films is commonly used and classified into two types--scratch-resistant(a bit more expensive) and non-scratch-resistant. 2. Functional films: this kind of films has better properties of scratch-resistant properties that can be classified into: A. Anti-reflection films, preventing the reflection of light on the screen, work well on some glossy display. Correspondingly they are more expensive than ordinary ones. B. Anti-ultraviolet-radiation films, protecting your eyes, have different technical content. This type of films is colored film --purple or green. But there's no need to mind the color because it's actually transparent when it cover the screen. The color a41 won't show up. And it won't affect the color displayed on the screen. C. Privacy-protective films. After coated with this kind of films, only looking at the screen head-on, or from no more than 30 degrees to sides, people can see the content shown on it clearly. And this kind of films is the most expensive among all.

Q:The protective film on the top of the stainless steel is torn and sticky

First, 1, with paper towels stained with some alcohol (preferably with industrial alcohol, not to use medical, also OK) wipe, and then rub a few times on the clean. 2. Use acetone. Method ibid. Less and thoroughly, and best of all, it removes the residual gum quickly, easily, and more efficiently than the essence. All two of these are solvents and are the best in all methods.

Q:What is a self-adhesive protective film?

No residual glue, mobile phone protection film belongs to self-adhesive protective film

Q:After the camera is attached, some bubbles want to be replaced with another one. How can you pull it out? It's urgent. Can you stick it in a little water? Oh, that's tough

The new film machine in the factory when the film strip is not in the true sense, is only a PE film, the main purpose is to ensure that the mobile phone in the factory to the packaging process of the screen is not easy to paste the razor, so this time the film, the film after storage to lose adhesion, easy tear at on the screen, so you need to buy a professional film at the time of the sale, or to allow merchants to send the film to you, but businesses in order to control the cost, when the mobile phone sales are sent scratch proof film, ordinary general quality, according to statistics, 97% of users lose business sent film in use for a period of time later, because the scratch degree is very poor, so I recommend you to understand the film VDOO, is also very cheap to buyMobile phones, cameras, notebooks, LCD TV film has the advantages of functional benefits

Q:How to clean up the protective film on the stainless steel door! ! !

Many people have the same question. The protective film on the stainless steel door is difficult to remove after using fot a long time. Does it work to heat the film with electric hair drier? Is there any other ways? The answer is yes. There are many other ways: 1. If the film is not too big, you can apply some lacquer thinner to it and then scrub it with cleaning ball. 2. Detergent used in textile industry will work (Bottled such detergent is called AL). I've tried it. It really works well. 3. Use sulfuric acid. But you should mix it with water before use, otherwise the door will corrode. Immerge the door into the mixed sulfuric acid for a period of time and scrub it with cleaning ball. 4. Firstly, use electric hair drier to heat the film. And then slowly tear it off or scratch it off using small wooden shovel. The marks left by glue can be wiped off with solvent.