|Product||Part No.||Carrier ||Adhesive ||Total Thickness||Tack rolling ball||180° Peel Adhesion to steel||Tensile Strength||Elongation|
|Double Sided Cloth Tape||DSC-3401||Cloth||Hot melt based||200micron ||20#||15N/25mm||60N/25mm||5%|
|Double Sided Cloth Tape||DSC-3402||Cloth||Hot melt based||400micron ||<19# ||> 18N/25mm||79N/25mm||30%|
|Double Sided Cloth Tape||DSC-3403||Cloth||Hot melt based||330micron ||22#||> 16N/25mm||65N/25mm||5%|
|Double Sided Cloth Tape||DSC-3405||Cloth||Hot melt based||300micron ||22#||16-19N/25mm||65N/25mm||5%|
|Double Sided Cloth Tape||DSC-3406||Cloth||Hot melt based||250micron ||22#|| 16-19N/25mm||65N/25mm||5%|
Core I.D.: 3” (76mm±1)
Jumbo Roll：1.02 x 500m
Packaging：Wrapped with corrugated cardboard.
Cut Roll: roll width 3mm up
It is mainly used for enwinding the handles of sports equipment and fixing the wrist/knee pad. It could be also used for small bundles packaging.
Packaging & Shipping:
Cut rolls: Shrink package, placed in cartons, with or without pallet
Jumbo rolls & log rolls: Packed with kraft paper and stretch wrap film, with or without pallet
1. Stable financial status and sound reputation as a state invested corporation under the direct administration of the State Council of PRC;
2. CNBM’s world wide influence as one of the 500 global fortunes specializing in building materials including adhesive tapes;
3. More than a decade’s exporting experience and technology in adhesive tape industry;
4. Preferencial shipping channels, with a separate team dealing with shipping.
- Q:What type of tape do you use for paint marking test?
- 8, 3M water labeling labels warranty and safety tape: 3M5557,3M5557NP, 3M5558,3M55599, 3M metal foil tape: 300PL, 508SN10, 3M grounding heat sink adhesive film: 737311, 3M conductive copper foil tape: 3M118111821183119411881189124513452245324512, 3M conductive aluminum foil tape: 3M112011701172117811791267, AL-25BT, AL-50BT, AL-25DC, CEA-1, CEA-213, 3M electromagnetic wave absorbing materials: 3M, AB2000, AB5000, AB6000, AB7000
- Q:How do you apply double-sided adhesive tape?
- 7, in the printing process to clean the printing plate, should avoid cleaning solvents, contact tape, so as not to damage the tape;8 when the plate is removed from the tape, the angle between the plate and tape shall be no more than 90 degrees.9, the interface version of the place to stay 5mm or so, the use of 3M 1600 electrical insulation tape seal version of the effect is good, you can effectively avoid wiping the plate caused by the interface version of the resulting ink pollution, and very economical.10, double-sided adhesive over repeated use can produce overprint bad phenomenon, especially in the new situation, and used for a long time in registering are likely to happen.
- Q:How can I use double-sided adhesive tape?
- Tear off the required length, and then use fingernail scratch tape attached to the bark, peel can paste.
- Q:How do I clean the foam tape marks?
- 3, with Fengyoujing rub, then dropped.4, you can try a rubber. But in the beginning may feel more and more dirty, but rub a little longer, you will see the effect, this method is relatively tired, have perseverance.5, with blisters, put a little detergent, and then brush with an old toothbrush just fine.
- Q:How to preserve PET double faced adhesive?
- Room temperature is OK, can not be sprinkled with rain, wind blowing.
- Q:Carton paste is used in cotton double-sided glue it
- Yes, the paper double-sided tape, double-sided adhesive paper thickness it thin, it is beautiful and very fast and convenient;Don't worry it will thin cotton double-sided adhesive viscosity and thickness is not good, this Never mind, the glue quality and processing technology;
- Q:What are the uses of video tapes in life?
- 1, tape should be stored in the warehouse, to avoid the sun and rain; forbidden to contact with acid, oil, organic solvents, keep clean and dry, away from the discovery device 1m, room temperature is between -15 and ~40 degrees2, rolls of tape should be placed, not folded, should turn once quarterly long store. 3, when the best handling conveyor belt with a crane and rigging beam and smooth lift, to avoid damage to the band edge, not caused by rough handling, loose volume rejection.4, tape type, specifications should be based on the needs of use and specific conditions, reasonable selection5, shall not be different varieties, different specifications, models, strength, cloth layers of adhesive tape connected (with groups) used together6, the conveyor belt joint is best to use hot vulcanization adhesive, in order to improve reliability, to maintain a higher effective strength7. The diameter of the transmission roller of the conveyor and the minimum belt diameter of the conveyor belt shall comply with the relevant regulations8, do not allow the tape or crawl to keep hunting, drag roller, roller flexibility, tension force should be moderate.
- Q:What are the general use of double-sided tape?
- Oily double-sided adhesive, mainly used in leather goods, pearl cotton, sponge, shoes products, such as high viscosity. Embroidery double-sided adhesive mainly used in computer embroidery.Computer embroidery special, sticky strong, repeated use more frequently.
- Q:What are the 3M double-sided adhesive?
- 3M double-sided adhesive classification1, according to the characteristics are divided into double-sided adhesive, single-sided adhesive;2, according to the substrate points:Non-woven fabric substrate double adhesive (made of non-woven fabric substrate, double coated with acrylic rubber): such as 3M9448, 3M9080, 3M9075 and so on;
- Q:How to remove the double adhesive on the tile completely?
- This should be removed, and your home glass should be changed.perhapsFirst, we can use to remove the nail polish pigment to the light water clean look, but due to the light water is likely to make the walls of the original color will fall off, so that the first in a small place is not obvious to try more insurance.Or, we can take a piece of vinegar covered dry cloth to cover the entire area of the double glue mark, and wait until the glue on both sides of the adhesive is completely soaked, and then you can easily remove it with a ruler.In addition, can also use the heating way to make double-sided adhesive glue softening: with a hair dryer blowing it to viscose softening, when double-sided adhesive adhesion is weak, can be removed more easily. If there is a little trace, wipe the varnish with the varnish to clean it.
We are a well known company in China specializing in adhesive tapes field, which is equiped with a uality management system which combined with research & development, production and marketing.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 10 Million
||Southeast Asia; South America; Eastern Europe; North America; Northern Europe; South Asia; Western Europe; Africa; Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||Above 10,000 square meters
|No. of Production Lines
||produce single sided tapes,double sided tapes, masking tape, Opp tape
|Product Price Range