Construction Machinery CDM312 features:
EU Stage IIIA Kubota Engine
High Performance Hydraulic System
Low Effort Joystick Controls
Comfortable Operator Station
More Work Tools
High Performance Power Train
Advanced engine, high horsepower and torque deliver outstanding performance.
Comfortable Operator Station
Spacious, comfortable ROPS/FOPS cab and ergonomic, low effort mechanical servo comtrols or joystick controls reduce operator fatigue.
Advanced Hydraulic System
Hydraulic system provides maximum power and reliability for demanding applications.
More Work Tools
Work tools can be changed quickly and easily with the machine's quick coupler system.Lonking's broad range of performance matched work tools make the Lonking Skid Steer Loader the most versatile machine on the job site.
|Engine Model|| KUBOTA V3600-T-E3B|
|Engine Model || KUBOTA V3600-T-E3B|
|Rated Power ||kW/hp\rpm ||63/86\2600|
|Operating Weight ||kg||3700|
|Power Train |
|Travel Speed -F&R||km/h||11.8|
|Hydraulic System |
|Hydraulic Flow – Standard||L/min/rpm||91|
|Loader Hydraulic Pressure ||Mpa||21|
|Hydraulic Flow – High Flow||L/min/rpm||135|
|Loader Hydraulic Pressure ||MPa||19|
|Operating Specifications |
|Rated Payload ||kg||1230|
|Tipping Load ||kN||2460|
|Breakout Force ||kN||25.9|
|Traction Force ||kN||28.06|
|Service Refill Capacities |
|Chain Box, each side|| L||9|
|Cooling System || L||12|
|Engine Crankcase || L||9|
|Fuel Tank|| L||91|
|Hydraulic Tank || L||65|
|A Max.Operation Height ||mm||3880|
|B Bucket Pin Height ||mm||3060|
|C Cab Roof Height ||mm||2050|
|D Max.Height at Bucket Leveled ||mm||2870|
|E Length without Attachment ||mm||2530|
|F Length with Standard Bucket ||mm||3350|
|H Dumping Height ||mm||2440|
|J Reach Rollback ||mm||610|
|M Wheelbase ||mm||1080|
|P Ground Clearance ||mm||180|
|R Front Turning Radius without Attachment ||mm||1180|
|S Front Turning Radius ||mm||2050|
|T Rear Turning Radius ||mm||1580|
|U Tail Length ||mm||980|
|V Center Distance between Two Wheels ||mm||1320|
|W Bucket Width ||mm||1820|
|G Dumping Angle at Max.Height ||mm||40°|
|K Bucket Angle on Ground ||mm||29°|
|L Bucket Rollback Angle At Max.Height ||mm||96°|
|Q Start Angle ||mm||28°|
- Q:What is the deadweight of the ZL50 loader?
- The ZL50 loader has a weight of 17100 Kg of ZL50 loader basic parameters are as follows: 1 rated load rated load 5000kg 2 overall 17100kg 3 weight weight rated bucket capacity 3M rated capacity of 4 maximum tractive force 152KN maximum traction force maximum breakout force 5 is the largest rise more than 170KN 6 maximum grade ability maximum gradeability 30 ~ 7 maximum maximum dump height 3150mm 8 unloading height maximum distance maximum dump reach uninstall 1250mm 9 machine size overall dimension (L * W * H) 7920 x 3050 x 10 3400mm minimum turning radius 6640mm minimum turning radius
- Q:What's the difference between a loader and a forklift truck?
- 1, loaders and forklifts are the same kind of machine, no different.2, the loader is a widely used in highway, railway, construction, utilities, ports, mines and other construction projects of earthwork construction machinery, which is mainly used to shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc..
- Q:How do you distinguish the type of loader?
- Distinguish the type of loader: the loader is now in line with the international standard,XG910 XG920, XG931,,, XG942, XG951Liugong has LG836, LG835, LG842, LG856, LG855Others do not say, Datong little italy,Internationally, the loader is numbered in the form of a digital 9, the middle of the 1,2,3,4,5, which represents a few tons of loaders, that is, we long said 30.40.50., the figure behind it represents the next generation of productsThe first number of Xia Gong is the present international serial number, 931 is the Xia Dynasty loader's 3 ton first generation product, and the 918 is the Xia work loader's 1 ton eighth generation productLiugong's first number was the previous international code, so it used 8, and LG855 was the fifth generation of Liugong loader's 5 tons
- Q:How to save energy and reduce the cost of loader?
- When the boss was present, he stepped on the gas and worked hard. He was slow to do it without being presentOf course, you can also adjust the stroke of the throttle line so that you can walk so big
- Q:30 and 50 loaders, 8 hours a day, and their oil, earthwork, long-term work, long working hours in a car, about how much money, monthly
- 30 according to the workload of 8 hours a day, oil and drivers 1300 yuan, 50 yuan per day, 2000, long-term concessions, but not much.
- Q:What is the structure of a loader? Which parts and accessories are included?
- Engine, torque converter, transmission box, front and rear drive axle, referred to as four piecesThe engine won't stop talkingThere are three variable torque converter pump, the pump (anti pressure oil supply lift bucket) steering pump (variable speed pump oil supply steering pressure) also known as walking pump (supply torque converter, transmission pressure oil), some models of steering pump is also equipped with a pilot pump (supply control valve pilot pressure oil)
- Q:Engine power of dragon 50 loader
- This is not necessarily, depending on the type of vehicle configuration is different.Generally speaking, it's about 162KW, 220 horsepower.
- Q:The difference between a skid loader and an ordinary loader
- Upstairs upstairs from where to turn, I also go to learn ah, ha ha!Sliding loader, mainly flexibility, traction, but the price is more common, 15 is much higherThe proposal still buys 15, although it is small factory, but also have a lot of things, the manufacturer that does small loader technically15 the machine is not complicated, the hydraulic is relatively simple, the failure rate is not much, the site material and maintenance workload is not large, too much, or buy accessories, or it is integrated with you, I would buy itIf you buy high-end products, skid loaders are certainly more stable and efficient than 15. But still buy imported good, domestic is not how stable, and its technical content is much higher, it is recommended CAT brand
- Q:Loader maintenanceThe ammeter in the loader is light, please ask the reason
- The main maintenance of the loader is still to beat the butter. If you live much, you'd better play it one day. Otherwise, if the length of time, each joint pins friction deformation, but also Zha pin, particularly troublesome. Followed by regular observation of oil, brake fluid, hydraulic oil and 8# hydraulic transmission oil, the shortage of OK.
- Q:How long will it take to change the hydraulic transmission oil for the loader?
- Replace hydraulic oil every 1500 hours
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range