Use: Carton Sealing
Adhesive Side: Single Sided
Adhesive Type: Water Activated
Design Printing: Offer Printing
Place of Origin: China (Mainland)
color: clear, super clear, crystal clear, red, blue, brown, yellow, green etc
|ItemNo.||Carrier ||Adhesive ||Total|
|Peel Adhesion||Holding |
|BP-40||BOPP film||water based acrylic ||40 micron||>18#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-45||BOPP film||water based acrylic ||45 micron||>18#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-50||BOPP film||water based acrylic ||50 micron||>20#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-65||BOPP film||water based acrylic ||65 micron||>24#||7.88N/25mm||>40h||>30N/cm||<180%|
Bopp tape is mainly for Carton sealing & packing, Light duty packaging, bundling, holding, and other office & household use.
Paper Core ID: 76mm
Jumbo size: 0.99m x 1800m, 1.22m x 1800m, 1.51m x 1800m
Cut roll size: As per customer's requirement
Cut rolls: 6 rolls per shrink, 36/54/72 rolls per carton with or without pallet
Jumbo rolls & log rolls: Packed with kraft paper and stretch wrap film, with or without pallet
1. Stable financial status and sound reputation as a state invested corporation under the direct administration of the State Council of PRC;
2. CNBM’s world wide influence as one of the 500 global fortunes specializing in building materials including adhesive tapes;
3. More than a decade’s exporting experience and technology in adhesive tape industry;
4. Preferencial shipping channels, with a separate team dealing with shipping.
- Q:How does the electrician use waterproof insulation tape?
- First, open the package and uncover and remove the insulating layer (layer of film) of the waterproof tape. Take the waterproof tape at the exposed 2CM of the conductor, lengthen 200%, and use the semi winding (half pressure half)
- Q:How many tapes do you need to make a tape? How do you calculate a mother roll and how many tapes do you make?
- 2. The mother rolls of different factories have different specifications. None of them can answer you. Only you ask the manufacturer who supplies it to you
- Q:Food packaging, sealing tape printing and product manufacturers inconsistent with the use of it?
- This small detail is best not to careless, after all, some customers will pay attention to theseAdopt landlord,
- Q:The production of transparent tape material is what to do
- The base material of the sealing adhesive tape is BOPP film.BOPP is a very important flexible packaging material, and has been widely used. BOPP film is colorless, odorless, tasteless, non-toxic, and has high tensile strength, impact strength, rigidity, toughness and good transparency. It is a high quality substrate for making transparent sealing tape. BOPP film has low surface energy, and it needs corona treatment before gluing or printing. However, the BOPP film has good printing adaptability after corona treatment. It can be printed by printing and has a beautiful appearance, so it is often used as the surface material of composite films. BOPP film is also inadequate, such as easy accumulation of static electricity, no heat sealing and so on. In the high-speed production line, BOPP film is easy to generate static electricity. Electrostatic eliminator is necessary. In order to obtain the BOPP heat seal film, can be on the surface of BOPP film after corona treatment coating heat sealing resin glue, such as PVDC, EVA latex latex, can also be coated with solvent glue, coating or extrusion method can be applied to the production of extruded composite heat sealing film BOPP. The film is widely used in bread, clothing, footwear and other packaging, and cigarettes, books cover packaging. The tear strength of BOPP film increases after stretching, but the secondary tearing strength is very low. Therefore, no cut can be left at the ends of the BOPP film, otherwise the BOPP film is easy to tear when printed and compounded. BOPP coated self-adhesive, we can produce our commonly used sealing tape, tape sealing tape, is a larger amount of BOPP market.
- Q:Selection of tapes
- So how do you choose the tape? In fact, the adhesive tape in the use of good and bad there are two criteria, one is the initial viscosity, one is to maintain the force, the two are inversely proportional. Under normal circumstances, adhesive force less than 10 adhesive tape is glue coated, teach less, usually only about 20 microns, such as stationery, tape, ordinary promotion belt used adhesive tape. The initial adhesive force of the normal sealing tape is between 15-20. The thickness of the adhesive tape is 22-28 microns. Is the standard thickness. But the tape on the market are mostly mixed with impurities, so the increase of the thickness of shielding impurities, the glue is also mixed with the toner, so transparent tape appeared egg yellow, light green, this tape is generally inferior.
- Q:What's the ingredient of 610#3m tape?
- Specifications: 25.4 mm * 65.8mWidely used in silk screen, printing and other processes. Prosecution of its ink adhesion, is a standard test means, such as: printed circuit boardPlastic products, silk screen, jet printingApplications: electronic products, silk screen, jet printingTest adhesive features: sticky stability, strong adhesion, international standard test tape
- Q:General adhesive tape is a taste, the size of the taste depends on the formula of glue, low molecular weight content, taste will be larger, once adhesive tape, it has a very small taste tape, we have been using.
- Cut with automatic cutting machine, first rewinding, using pressure wheel will drive off the bubble, put 3 to 4 days later, with the cutting table cutting, the advantage is that the appearance of adhesive tape, but the disadvantage is that the production cycle is longer.I hope this will be accepted
- Q:How to adjust the tightness of belt pulley in belt sealing machine?
- The side sealing machines and other series sealing machines are light, durable and easy to operate. The key component of the widely applicable packing machine is the drive motor
- Q:How does the sealing tape judge its viscosity?
- 2, holding power: in the tape completely stick objects, persistent viscous, test method is: the use of specified size of tape surface with live two plates, and a steel plate hanging on the tester, another piece of suspension 1KG weight, see two plates not separated how long can the time.
- Q:How can I use the belt cutter? It's the cutter for sealing the tape.
- But do not attach the tape to the sealing machine and put it away. There is no machine, or else let you have a look
W are a well known company in China specializing in adhesive tapes field. Its good quality has won the trust and interest of customers all over the world.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 1000 Million
||Southeast Asia; South America; Eastern Europe; North America; Northern Europe; South Asia; Western Europe; Africa; Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||Above 10,000 square meters
|No. of Production Lines
||produce single sided tapes,double sided tapes, masking tape, Opp tape
|Product Price Range