Order On-line Tracking
Technical parameters: The product is a flexible led Strip with high plasticity, can bend around shapes---fixed on the bumpy surface, easy to install (using a self-3M self adhesive glue) and so on;With a waterproof, high temperature does not change color, long life and other advantages of low voltage;With brightly colored soft light compact size (3 LED lights can form a circuit---can be cut every 3 LEDs) energy efficiency and environmental protection benefits are ideal for neon replacement products (than neon lights saving 70%), is more decorative outline. Making various shapes ideal for lighting.
Emitting light colors: red, yellow, blue, green, white, warm white LED type: SMD3014 LED quantity: 120240 m/m light life: > 50000 hours package: 5 m/roll waterproof level: IP68 working temperature: - 20 ℃ to 50 ℃ working voltage: DC24V plus or minus 5% light Angle: 120 degrees of flexibility
Emitting light colors: red, yellow, blue, green, white and warm white
The LED type: SMD3014
appearance size: 1000 mm x 12 mm x 2 mm
LED quantity: 240 m/m
Light life: > 50000 hours
Package is installed, 5 m/roll
Waterproof level: IP68
Working temperature: - 20 ℃ to 50 ℃
Working voltage: DC24V plus or minus 5%
Power : 19.2 w/M
Light Angle: 120 degrees
Flexible FPC board color: white/yellow emitting light colors: red, yellow, blue, green, white and warm white
3. Solar Panel Images
1. The low voltage dc 12 v power supply, safe and reliable.
2. Every three leds can form a loop, can be arbitrary along the tangent truncation, no damage to the other part, but also unlimited extension, can be customized according to customer's request all kinds of the length of the article lamp.
3. Use very soft PCB as the base board, can be arbitrarily curved, arbitrary fixed to the concave and convex surface
4. Rich and colorful color has red, green, yellow and blue, can also according to the requirements of various colors
5. General unilateral wire length 0.15 M, connection mode, the length of the wire, can also be made according to the requirements
6. 5 meters per roll disc packaging or arbitrary length of each article
7. The back of the PCB have genuine 3 m glue, convenient paste
8. Supporting power
9. The company's products have passed CE, ROHS and so on many international certification
1. Ultra-thin light box, lighting signs, advertising signs, etc
2. High-end specialty stores, shopping malls and other indoor lighting business atmosphere
3. Entertainment, beauty salon lighting
4. The atmosphere of bars, cafes and other recreational places lighting
5. Arts and crafts light source
6. Used to mark paths and contour, luminous signs, etc
7. Car decoration, etc
6.How to identify the LED with quality
To identify can be mainly from the following several aspects:
1, the solder joints.Easy ezsafe photoelectric regular LED lamp belt manufacturer of LED lights is to use SMT process, with solder paste and reflow soldering.Therefore, leds solder joints of the belt is smooth and solder amount not much, solder joint circular arc shaped from the FPC welding plate electrode to LED in extension.
2, see FPC quality.FPC divide into two kinds, apply copper and rolling of copper coated copper copper foil is out, scan it can see it from the joint of welded plate and FPC.And rolling of copper is close and FPC is an organic whole repeatedly, can be arbitrarily bent but there will be no solder falls off phenomenon.Apply the coin will appear if there is excessive bending welding plate fall off, repair when the temperature too high can cause pads fall off.
3, look at the LED lamp belt surface cleanliness.If the LED lamp belt of the SMT process, its surface cleanliness is very good, can't see any impurities and stain.But if use hand welding production of LED lights LED, no matter how the surface cleaning, will remain with traces of the stain and cleaning.
4, see packaging.Easy ezsafe photoelectric regular LED lamp belt will use anti-static coil disc packaging, usually 5 meters a roll or 10 meters a roll, and then use anti-static moisture-proof packaging seal again outside.The shanzhai leds will bring because of cost savings, and use recycled coil plate, then no anti-static moisture-proof packaging bags, see coil plate can see appearance with clear label and tracks when cut.
5, read labels.Easy ezsafe photoelectric regular LED lamp belt bags will be printed labels and coil plate, rather than the printed label.
6, see the attachment.Easy ezsafe photoelectric regular LED lights inside the belt will be included in the enclosed instructions and lamp specification, at the same time also can equipped with leds with connector or booth;The shanzhai leds with cartons would not have these attachments, because some manufacturer, after all, still can save a province.
①What price for each watt?
It depends on the quantity, delivery date and payment terms,
②What is your size for each module? Can you tell me the Parameter of your module?
We have different series of panels in different output, both c-Si and a-Si. Please take the specification sheet for your reference.
③Can you provide the peripheral products of the solar panels, such as the battery, controller, and inverter? If so, can you tell me how do they match each other?
Yes, we can, we have two companies for solar region, one is CNBM International, the other is CNBM engineering Co.
We can provide you not only the solar module but also the off grid solar system, we can also provide you service with on grid plant.
④What is your warranty system?
Our product performance guarantees for 25 years
• 12 years guarantee for workmanship
• Timeliness of delivery
• Quality Products certified (TÜV, UL, CE, ISO)
⑤How do you pack your products?
We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.
⑥ Can you do OEM for us?
Yes, we can.
⑦How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|