LED STREET LIGHT CNBM 70W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 70W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H70 | ||
Power | 70W | ||
LED Quantity | 28pcs×2.5W | ||
Input Voltage | AC 100~264V;50/60HZ | ||
Input current | 0.55A(110V),0.27A(220V) | ||
PF | >0.95 | ||
CRI | ≥72 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 5000/5700K |
Luminous flux(±10%) | 7000 lm | 7700 lm | 8400 lm |
Dimension | L525*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -40 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years |
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q:How big is the power of a LED street lamp?
- General 20W-300W have
- Q:What are the requirements of the LED street lamp chip? How big is it? How many will it take and how big is the distance between them?
- To single words, whatever you want a few watts, is generally the number of beads multiples of 7. A single chip is usually 45U, specifically you want what brand, the price is not the same.
- Q:What are the 6 main disadvantages of LED street lights? What are the 6 major disadvantages?
- Light LEDAfter a period of illumination, the light intensity of LED will be lower than that of the original light
- Q:How can I get the LED street light?
- Suggest you still look for professional foreign trade platform consultation, our company is LED international procurement network platform member, and now and Singapore's foreign businessmen talk about an outdoor landscape lamp list. There are foreign trade teacher guidance, looking for them better.
- Q:What are the main differences between a LED street lamp and a solar street lamp? What are the advantages and disadvantages of each?
- It is two kinds of concept that do not conflict, it is the explanation of street lamp from two angles, can make LED solar energy street lamp completely.
- Q:Is there any difference between intelligent street lamp and intelligent LED street lamp?
- The difference is that the light source of the latter has been defined as LED. The light source of the former is not defined and can be a variety of light sources.
- Q:How to choose the power of solar street lamp?
- Advantages: simple installation, in the box after power according to the load size and the actual situation of the line tailored investment economy, energy saving ratio between 20-30%. 2 disadvantages: affected by the actual line voltage, the energy saving effect is not significant and unstable, if the line voltage environment is only 210, so energy-saving space is very small, and the end of the street may be in half on or off state. If the line voltage at the front end of the box is too high, the front part of the street lamp will be burned out. Thus, the harm to the light source will be great, and the maintenance cost will be high. In this process, due to the reduction of the voltage, the illumination will be correspondingly sacrificed". Comments: the above situation is the road Lantern Festival electric cabinet in the past two years in the process of street lighting energy-saving applications summed up the lessons learned. So far, this kind of energy saving law has been phased out. High power LED street lamp can achieve the purpose of high efficiency, energy saving, environmental protection, high color rendering and long life through a semiconductor light-emitting material.
- Q:How to calculate the number of Duodawa with LED lights
- First of all, if the width of the road is 20 meters wide, the road should be the main road, and the cloth lights will do.Assuming the double symmetrical cloth light, the lamp pole height is at least greater than the width of the road 1/2, so the pole height is 12-14 meters.Suppose the 14 meter pole, the street lamp installation spacing is generally about 3 times the height of the lamp post, so the distance is at least 40 meters.40 meters distance, height 14 meters, in this case, LED street lamp power to more than 200W power, can basically meet the main road lighting requirements.
- Q:What are the components of the LED street lamp holder structure?
- The surface of the lamp has been treated with UV resistance and corrosion resistance, and the overall lamp meets the IP65 standard. The outer cover can be made of PC tube, and the temperature can be up to 135 degrees.
- Q:How much is the rated voltage of the LED street lamp? Is it direct current?
- It is worth noting that, if the solar LED street lights, then certainly the input DC, and as many volts, still depends on the situation.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED STREET LIGHT CNBM 70W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches