LED STREET LIGHT CNBM 50W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Street Light 50W
one new invent of Lighting module ,which is perfect for installation on street to replace all the old traditional lighting
Application
LED street light can be applied to highways, pedestrian roadways,streets, parking lot, garden,playground, sport area, campuses etc.
Parameters
Model | H50 | ||
Power | 50W | ||
LED Quantity | 48pcs×1W | ||
Input Voltage | AC 100~277V;50/60HZ | ||
Input current | 0.91A(110V),0.45A(220V) | ||
PF | >0.95 | ||
CRI | ≥70 | ||
Beam angle | 140°×60° | ||
CCT | 3000K | 4000K | 6000K |
Luminous flux(±10%) | 5000 lm | 5500 lm | 6000 lm |
Dimension | L480*W328*H108mm | ||
IP rating | IP66 | ||
Material | Aluminum alloy | ||
Anti-corrosion grade | WF2 | ||
Working temperature | -30 to +50 ℃ | ||
Storage temperature | -40 to +70 ℃ | ||
Working humidity | 10% to 95% | ||
Warranty | 6 years |
Features of Led Street Light
1. Module Patented design ,prevents debris build-up;Umodularization has better heat dissipation system,keep the temperature of the LED chips and the driver in the safety range,so ensure the lamps long lifespan and low lumen attenuation.
2. Use waterproof wire connector,wire connection become easier ,much more convenient ;use a large ring seal for the lens, sealed and reliable;Module and connection design can optimize construction and assembly,allows for easy maintenance,upgrade and SKD for local assembly.
3. Professional design for the luminous intensity distribution, meet all kinds of lighting requirements,overall spot is rectangular.
4. Professional design with flexible installation ability, installation angle can be adjusted among -5°,0°,5°,10°,15° without changing the lamp post. The installation position of different angles are visible, convenient for installation and adjusting the lamp’s angle .
FAQ:
Q: What is your Led Street Light ?
A: The luminaire
Q: What is the Power Factor of your LED Light ?
A :> 0.9
Q: What is the Color Rendex Index ?
A: RA 70,RA80
Q: What is the light efficiency of CNBM Led Panel Light ?
A: 90LM/W upto 140LM/W
Q:Which kind of LED Chips you are using ?
A: BRIDGELUX OR CREE
Q: What is your LED Warranty Terms ?
A: 3 YEARS - 10 Years
Installation instructions
- Q:Can you install LED street lights in your own yard?
- In their own yard, you can install LED street lamps, which conforms to the national policy of promoting environmental protection and energy conservation.
- Q:How many LED lights are there in the downtown area, W?
- Depends on the width of the road, the normal is 250W metal halide lamp, there are 400W.. Used at intersections,
- Q:How is the minimum illuminance of LED street lights Emin obtained? How to calculate?
- Minimum illumination Emin, if you go to calculate or use lighting software (DIALux) simulation, you can get the minimum illumination Emin, how to simulate this? This is not clear
- Q:How much is the price of the LED street lamp?
- Photovoltaic street lamp environmental protection, safety, long life, can be made according to user requirements.
- Q:LED street light dedicated drive power 98W14 string 7, and ask 14 string 7, and what does that mean?
- 14 strings of beads strung up voltage at around 48, indicating that the LED lamp is 48V system, LED lamp voltage is common for 12V, 24V and 48V are increased in order to reduce the current voltage is such a high efficiency lamp, 7 and 14 series and beads such power is 98W and you can have 14 strings of 10 and then the lamp is 140W street lamp, street lamp is 14 If you design on the design so in the production of aluminum substrate is designed to be 14 on the aluminum plate (the aluminum substrate is a circuit board, the welding beads in the above).Generally common street lamps recommend using 24V system (less than 40W suggested using 12V), because the voltage is relatively low, so relatively safe, but also the most street accessories, easy to buy.
- Q:LED technical requirement of street lamp 100W
- (5) the environmental temperature of LED street lamp should be -20 to +50 centigrade, and other special requirements such as temperature, humidity and corrosiveness of the local environment should be satisfied.(6) the power factor is greater than or equal to LED 0.95 lamps, lamp power supply efficiency is more than 95%.(7) the working voltage range of LED street lamp is from 85V to 265V (in this voltage range, LED lamps can still work normally).(8) LED street lamp has surge suppression performance (against lightning stroke), the input over-voltage protection, when the voltage is restored to normal, can resume work.
- Q:Road light is one of LED. How much is it?
- You can have a look at the light path. It's nice and the price is right
- Q:High frequency jet lamp, LED lamp, xenon lamp, which is suitable for street lamps
- The so-called high frequency jet lamp, according to my observation, should be ceramic metal halide lamp, just ballast working mode and the previous adjustment, it may also be manufacturers just make a gimmick.To do street lights, the current high-pressure sodium lamp and LED lights are more, but if the local highways department can pass, it is recommended to adopt 150W or 250W ceramic metal halide lamp, but the quality of supporting ballast must be reliable.
- Q:What's the price of the LED road lamp holder?
- Generally speaking, as the working environment of street lamps is the worst, it is normal to go to eight or nine dollars per watt.
- Q:30W LED solar street lamp 6 meters high, about how much?
- Packing, excluding freight, tax, installation fee, approximately 1650-1750, too low, possibly of high quality, too high to be pit. This suggestion is supplied by brilliance lighting, solar street light brand manufacturers, for reference only.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED STREET LIGHT CNBM 50W WITH LIGHT EFFICIENCY 130LM/W
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products