|Lamp luminous flux(lm):
||LED Lamp cup
• Both dimmable and non-dimmable series
• Single optical lens technology
• Broad range of wattages and beam angles
• Dimmable from 10-100% brightness
• Energy effcient
• Closely resembles look and feel of halogen spot
• Easily retrofit conventional fixtures with LED
• Tune light intensity to suit your environment or the time of day
• Up to 85% energy savings compared to halogen GX5.3
|CRI||CCT(K)||Average Lifetime(hrs)||Energy Level|
|LED-E1-GX5.3-7W-Dim-COB-2700K-36D-CT||7 ||1 ||450 ||64 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-7W-Dim-COB-5700K-36D-CT||7 ||1 ||470 ||67 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-7W-Dim-COB-2700K-24D-CT||7 ||1 ||450 ||64 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-7W-Dim-COB-5700K-24D-CT||7 ||1 ||470 ||67 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-5W-Dim-COB-2700K-36D-CT||5 ||1 ||350 ||70 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-5W-Dim-COB-5700K-36D-CT||5 ||1 ||370 ||74 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-5W-Dim-COB-2700K-24D-CT||5 ||1 ||350 ||70 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-5W-Dim-COB-5700K-24D-CT||5 ||1 ||370 ||74 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-7W-COB-2700K-36D-CT||7 ||1 ||450 ||64 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-7W-COB-5700K-36D-CT||7 ||1 ||470 ||67 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-7W-COB-2700K-24D-CT||7 ||1 ||450 ||64 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-7W-COB-5700K-24D-CT||7 ||1 ||470 ||67 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-5W-COB-2700K-36D-CT||5 ||1 ||350 ||70 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-5W-COB-5700K-36D-CT||5 ||1 ||370 ||74 ||>80||5700K||20,000 ||A+|
|LED-E1-GX5.3-5W-COB-2700K-24D-CT||5 ||1 ||350 ||70 ||>80||2700K||20,000 ||A+|
|LED-E1-GX5.3-5W-COB-5700K-24D-CT||5 ||1 ||370 ||74 ||>80||5700K||20,000 ||A+|
- Q:Drive power supply with a what kind of specification, can be in parallel two 3 wled shoot the light
- For example, A 3 w lamp current is 0.15 A, are two parallel is 0.3 A, then you have to choose the 0.3 A constant current source circuit to the two lamp power supply at the same time.
- Q:On the ceiling lamp bulb is broken can change LED light bulb?
- Shoot the light with two kinds of transformer and transformer. With transformer use 12 v bulbs, without transformer is 220 v bulbs. As long as the voltage, socket outlets can replace the same, otherwise the lamp holder, and you want to change the transformer.
- Q:How many W LED lamp can replace 50 W halogen lamp?
- at present the mine, factory production of light that shoots the light is different, even the same manufacturer also has different lighting lamp. Is this formula LED lamp wattage * LED lights effect = total luminous flux of halogen lamp (brightness)
- Q:Shoot the transformer output 12 v 20 to 50 w lamp is LED12V 4 w can use excuse me?
- Ok, now are LED lamp to replace the original quartz bulb,Can be used, but there must have a circuit inductance/curtains on tube/semiconductor current limiting device (using single-chip microcomputer control)!!!!!
- Q:Decorate condole supports are installed on the led shoot the light, use what wire?
- Wire don't need to be buried inside the wall, with a 1.5 mm square copper core Plastic wire all can
- Q:Home use shoot the lamp to general how many watts is the best?
- Ordinary household 3 w - 10 w are common. Ordinary quartz lamp cup 50 w LED lamp has 20 w 35 w A watt.
- Q:What kind of transformer mr16 led lamp need!
- MR16 lamp is 12 v low voltage, just to the 12 v constant voltage transformer, dc and ac can be, but the transformer power should be greater than the rated power of shoot the light a little.
- Q:How much is the household lamp size standard specification?
- In household shoots the size also is to have a lot of difference, 35 w led lamp size: 205 * 90 * h170PAR is said parabolic shape of the lamp. The shape of the mean. 20,30,38 said maximum overall diameter size. As 38, the largest diameter size of 38 (1/8) * * 25.4 120.0 mm material, 38 in Britain is divided into units and conversion relations as follows: 1 the points = 1/8 "1 inch = 25.4 mm, MR16 and GU10 joint form is commonly used to shoot the light lamp cup, LED is also in this labeling method.
- Q:A few questions about LED lights
- First, the power supply current exceeds the LED light source of the load current, lead to LED lamp bead light failure quickly, even destroyed. Solution: 1, to reduce the input current; 2, the LED light source for more than 45 mil 3 w light bead, so each lamp bead to withstand current of 700 ma, but this time is 9 w, must increase the radiator. Second, the high voltage is bound to burning lamp bead,, the only way to avoid lower voltage, series resistance. Third, voltage and current are beyond ratings, is sure to burn, not saved. Can only cut down the voltage and current are. Method is still the same, want to directly change the power supply, either in LED series resistance voltage drop flow in the circuit
- Q:The LED lamp has been flashing, what is going wrong?
- Check wiring electric, if have no electricity change the size of driving power, for you to buy a large mismatch also can appear this situation, patch is good without water.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range