• Up to 80% energy saving compared to Philips Halogen 35/50W MR16
• Long lifetime of 40,000 hours (B50,L70)
• Retrofits into vast majority of GU5.3 based luminaires
• Compatible with broad transformers and dimmers (see the table of
• 24 & 36 degrees beam angle for a clearly defined beam spread
• CCT: 2700K, 3000K, 4000K
• No UV and Cool Beam (no IR)
• Environmental friendly, without mercury or any other hazardous substances
• RoHS compliant
Philips 12V MASTER LED Dimmable MR16 lamp is suitably designed for spot and
general lighting applications in hospitality, retail and home segment.
Unlike the conventional halogen reflector lamp, Philips 12V MASTER LED
Dimmable MR16 lamp, 6.5W and 7W power consumption per lamp, has a long
lifetime of 40000 hours ( or equivalent to 25 years if lit continuously for 4 hours
a day) ensuring minimum maintenance cost in hotels, cafes and shops, especially
suitable for various applications in the public areas such as:
– Corridors / Stairway /Washroom
– Lobby / Reception areas
• Operating temperature range is between -20°C and 40°C ambient
• Only to apply in indoor environments and open luminaire in the front with
GU5.3 lamp-holders that offer sufficient space ( at least 10mm free air space)
• Compatible with existing halogen transformers and dimmers (refer to the
recommended transformer & dimmer table)
• Not intended to use with emergency light luminaire or exit lights
• Do not use or install the lamp in wet environment
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
30-40 business days
1. 3-5 business days for Sample Orders; 7-15 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:LED to shoot the light is good
- The lamp is incandescent lamp, principle of the first generation is heating filament under inert gas protection. Filament to a certain temperature when the potential energy of the electrons of the atoms of the outer is elevated to the unstable state, outer electrons when atoms never returned to steady state stability of high energy status will emit light. The working principle of this makes the most of the electrical energy into heat energy, can light energy is less than a few percent, efficiency is very low. The second generation of the electric light is a gas discharge lamp, including fluorescent lamp, fluorescent tubes, energy-saving lamps. Most of these lamps using high voltage ion release ultraviolet phosphors into visible light. So you need not too much heat loss, greatly increase the use of electric power, its luminous efficiency can reach twenty percent. The third generation of the light is LED (light emitting diode) lights, main points, high power and small power and different colors. The LED is the only principle of solid state light emitting light. Using cavity semiconductor PN junction and electronic to move atoms bond change rates can be released in the form of light. Because of the different semiconductor materials can be directly send red, yellow, green, blue and ultraviolet light. Blue light and ultraviolet light and fluorescent powder into white light. Do not need temperature and high pressure due to the working principle of the LED, so in theory to waste the least amount of electricity. Practice on the white LED is also continuing to improve photosynthetic efficiency. At present the highest photosynthetic efficiency can reach above thirty percent.
- Q:What's the difference between an led light and an led light cup
- Look from the light source that can hold an incandescent bulb, LED ceiling lamp can also be installed energy-saving lamps. Incandescent lamp when loading is yellow. Energy-saving lamps when loading can be white or yellow light bulb type. Smallpox smallpox LED lamp illuminant direction can't be adjust. From the chart we can see directly LED ceiling lamp energy-saving lamp tube, and the waterproof LED ceiling lamp is added a waterproof outside the glass. General household lamp with quartz bulb or lamp bead. The large lamp, of course, is not necessarily with quartz bulb. Quartz bulb only yellow light. And the general lamp illuminant direction can be adjusted freely.
- Q:What is the price of an led light?
- Suggested that before buying compare several brands, more cost-effective choice, of course you can also online mall, usually the price will be more cheaper.
- Q:Shoot the transformer output 12 v 20 to 50 w lamp is LED12V 4 w can use excuse me?
- Ok, now are LED lamp to replace the original quartz bulb,Can be used, but there must have a circuit inductance/curtains on tube/semiconductor current limiting device (using single-chip microcomputer control)!!!!!
- Q:Decorate condole supports are installed on the led shoot the light, use what wire?
- Had better use soft wire, good construction. Main line with 2, 5, a lamp need not so thick.hope it works for you
- Q:The ceiling of a ceiling light is of general size
- And the size of the wattage for the 70 w lamp also has two kinds, one is opening, width is 205 * 110, height is 205 a; The other is 180 * 137 opening, width, height of 220. Then there is the lamp wattage for Max300W, the size of openings and width 150 * 287, 391. Then there is the lamp wattage for Max300W, the size of openings and width 150 * 287, 391. And Max120W shoots the size of openings, 130 * 220, wide and high is 309. The size of the lamp for 35 w generally has two kinds: the first is a opening, width is 205 * 90, the size of the high of 170. Usually shoot the lamp to the size of holes to 45 mm, 50 mm, 55 mm, 60 mm, 65 mm and 70 mm, 75 mm and 80 mm, 90 mm and 100 mm.
- Q:Why home outfit LED lamp has always been a bit weak after switch off the light
- This phenomenon is a common problem, LED production called micro light disturbance stress, the reason may be: near ultraviolet (uv) light source excitation light glow fluorescent powder layer; Drive power supply design, no surge absorbing circuit of induction electric discharge, low light performance at the same time accompanied by flashing phenomenon; Drive power leakage quality problem, 220 v is shut off due to the exist lamp holder to switch is the power cord length, induced current LED light source series shimmer. Solution is the best in qualified driving power, the phenomenon of quality control means perfect manufacturer is not allowed to the factory, the product shape will test whether design light reaction, Induction light reaction has a passive remedy is to switch the fire try zero wire transfer. Special instructions as consumers accustomed to using fluorescent tube before, induction shimmer as normal, but the LED lamp product design can eliminate this problem, the quality management of serious manufacturer's product inspection is not allowed through, so do not assume responsibility should the user, can find manufacturers solve business
- Q:Household LED lamp directly on the ceiling above the glass, glass temperature is higher, matter?
- LED lamp life is directly related to working temperature, high temperature must influence life, such as lamp bead light early failure, damage to the drive, and so on, so the LED heat dissipation has been LED lighting to solve big problems.
- Q:How high is the temperature of the LED lamp?
- Because the LED can only be used under a certain stability, LED lamps, lighting is not stable,
- Q:LED to shoot the light always blink what's the problem?
- This may be the drive problem, change the drive is not bright is the problem of aluminum plate design. Try to change the first drives.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range