LED Module Light for Full color with Waterproof

Ref Price:
Loading Port:
Shekou
Payment Terms:
TT OR LC
Min Order Qty:
10 m
Supply Capability:
1000000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

LED Module

HC-F12V-7515-3LED-WS2811

PRODUCT DETAIL

Led module light

I.Advantages:


1,Products have RoHS Certification

2, from factory with 3-5days delivery

3, Technical support are avaliable

4, OEM/ODM are welcome

5,Control by DMX 512 /Mini controller/HC201S

II. Product Feature

1,WS-1.F5V-F12WS2811 is a combination of a plastic (thermostability,cold-resistant,resistant to UV)

shell and PCB board, also 3 spell line with red,green,white color.contain 1PCS Φ12 RGB LED

 

2, This product can achieve effects of full-color running water,chasing and scanning. Depending on

 

the different installation methods may compose different dynamic effect of different color's character and design.

 

3, Easy installation, high brightness, safe and energy conservation, long lifespan,Low brightness declines.

4, Widely used in LOGO, advertising billboard,exposed luminous characters, painted screen, can replace

the traditional neon signs. The distance between the lights can be choosed as customer's request.

TIPS:The common length is 10cm;

 

5, This product could be linked up to 50pcs.diameter is 12mm. The diameter of the power

cord should bebased on the actual maximum current, the product power, cabling length (recommended no

more than 5 meters), and the voltage of transmission line.  
  

PICTURES

Led module light

Led module light

FAQ

We have organized several common questions for our clientsmay help you sincerely

How about your Warranty

Warranty: 1-Year for the whole light. Warranty is based on correct storage, installation, using and maintence.

How to guarantee the quality of the products

We have established the international advanced quality management systemevery link from raw material to final product we have strict quality testWe resolutely put an end to unqualified products flowing into the market. At   the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon

as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Parameters of the LED module
1, light angle: general manufacturers to provide LED light-emitting angle for the LED module angle.2 brightness: the brightness we usually refer to in the LED module is usually luminous intensity and lumen.3 waterproof level: if you want to use the LED module outdoors, this parameter is very important, usually in the outdoor situation, the best waterproof level to IP68.
Q:What is the temperature tolerance of the LED module?
You can check the LED parameter manual you use. The maximum allowable junction temperature is 120 degrees C. Then look at the thermal resistance of the package, then the maximum allowable temperature for the LED pin is 120-Rja*P, where Rja is thermal resistance.
Q:What's the difference between the LED module and the case?
The basic unit with circuit and installation structure, which has display function and can realize the function of display screen by simple assembly
Q:What is the LED patch module?
Because of the relative to other types of module light angle, high brightness, low attenuation, so use more widely.
Q:What's the difference between the LED module and the LED dot matrix? Is it the same?
LED dot matrix refers to the encapsulation of 8*8 modules, and then into a unit board, such panels are called dot matrix board, generally used for indoor monochrome, two-color display screen.
Q:How many specifications are there in the patch LED module?
SMD patches are generally divided into:3020/3528/5050/3014 et al - these are positive glowing;0603/0805/1016/1024, etc. - these are side glowing light sources.The power has 0.06W, 0.2W, 0.3W, 0.5W, 1W and so on.
Q:3 lights, LED module, each 15 series, a total of 6 parallel groups, the need for how much power, please expert advice
Like you said. You are supposed to use piranha module. Piranha module, one power only 0.36W. Even the 5050 patch, a module only 0.72W. You only have 90 modules in all. The most is 64.8W. The power you use is 114W. There is no problem with reason. You see if the power is broken. The power source indicates a voltage of 220V and 12V. You see, and when you connect, the positive and negative poles are connected wrong.
Q:Why do some LED modules have 138 decoding, but some do not have 138, directly from 245 to 4953?
138 is the 3-8 decoder, so: to 16 scan, you must have 16 scanning lines, then line input a, B, C, D four lines, must use 2 138 to decode into 16 lines; and so on, 2 sweep above must be decoded. But if it's a static scan, it doesn't seem necessary to decode it So there is no 138.
Q:What is the pre maintenance LED module?
That is, the LED display module before the maintenance, that is, from the front of the module can be maintained from the front of the module, usually made with a magnet, you can take the previous surface down
Q:Looking for LED module manufacturers.
Outdoor is generally 16*16, 32*16 rarely do

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range