||Lamp luminous flux(lm):
||-370C - 550C
||85-265V, 12v, 24v,36v
1. IC Solution, Constant Current Output Driver. To insure the safety and stability of LED bulb.
2. E27 or B22, International Standard.
3. 360° Beam Angle. This LED Ball Bulb is designed to 360 degree particularly..
4. Energy-saving and Eco-friendly. This LED Bulb is adopted the special high-quality LED Filament.
5. Low power consumption. Using 12 watts for up to 1100 lumens of brightness.
6. Longer Lifetime and Best Guarantee. Long life-span, up to 30,000 hours. With 2-year Warranty and CE certificate.
7. Made of high-quality Aluminum Alloy & Glass, higher light luminous efficacy, better heat dissipation.
8. Dimmable, support soft warm white, white and cool white.
12 pcs LED filament
Warm white, white, cool white
Silver or Gold
≥80 or >75
LED Light flux
Lamp Light efficiency
200 g (with box)
￠80mm x H145mm
● Technical request
-350C - 650C
Protect a Grade
- Q:What are the requirements of the LED series inspection specification for bulb bulbs?
- The temperature rise of the finished lamp is not more than 120K. The temperature rise is equivalent to the maximum value of 60W incandescent lamp.
- Q:LED what are the bulb screws?
- LED bulb is the appearance of the shape of the bulb - people have the habit of spherical internal light source is selected for LED lamp. With all the advantages of LED lamps: 1, energy saving, environmental protection; 2, long service life; 3, no stroboscopic, green.More energy-saving: LED lamp energy consumption is energy-saving lamp 1/4, incandescent lamp 1/10Long life: LED lamp life of up to 50 thousand hours, life expectancy is 5-10 times energy-saving lamps.More healthy: light evenly, no strobe, no glare, no UV and infrared.More environmentally friendly: no harmful substances such as mercury can be recycled to protect the green earth.Full color change: rich colors, vivid and delicate patterns and effects can be displayed.Installation convenience: simple installation, can replace incandescent lamp directly, maintenance cost is extremely low.
- Q:How to choose the bulb power?
- Obviously, the designer doesn't want the ball lights to work at rated current, but there is a margin, so the light bulb will work more reliably. Because of the constant current source, current of each lamp is not 30mA, but 330mA/13=25mA, of course, the brightness of the lights will be smaller.
- Q:Is it possible to manually weld LED bulb bulbs?
- You can ignore the effect of heat conduction and thermal grease, solder is better, I was doing a lot of tests, the thermal conductivity of thermal grease is about 1.2 to 2, aluminum more than 300, thermal grease just to fill the bottom of the LED and the aluminum substrate contact surface gap, you don't fill gaps don't hinder it the normal contact with the aluminum substrate at the bottom of the LED, will be lost, and the use of thermal grease you for about a year will have to replace the thermal grease, only unscrupulous vendors will deceive others say I added thermal grease, heat conduction effect is not fully qualified, in fact, for a long time, the potential will LED light spot the chip inside the loose because of the long-term high temperature, causing the current growing, until completely off
- Q:LED bulb lamp. Is there a good drive or no drive? Is the lamp of good or integrated?
- Depending on your application and cost, there's no way to say which is absolutely good;If the occasion is appropriate and the cost is not urgent, buy a drive.
- Q:Are there any differences between negative ion bulb and LED bulb?
- The brightness of LED anion bulb of each LED have good consistency, high color purity, light stability. 1W power, ultra low energy consumption. A variety of light colors are available for you to create a dream like color space. Built in negative ion generator, each cubic centimeter produces 3000000 negative ions that allow you to have a healthy air environment while you own light. Negative ions can effectively remove formaldehyde, benzene, toluene, ammonia, acetone, carbon monoxide, sulfur dioxide and other toxic gases, for your breathing health increased by a solid line of defense.
- Q:LED what is the glue between the aluminum base of the bulb and the cooling aluminum?
- It's best to use heat conductive glue, such as ST922.
- Q:How to identify Ic constant current LED bulb?
- Look at the power supply, there are a few simple electronic and capacitive circuit board, it is not constant flow, cross flow is larger, so understand? Cross flow IC, that is, the meaning of intelligent voltage regulator, so that the LED is not easy, bad capacitor driven LED is relatively easy to damage, easily breakdown, and power consumption than the cross flow
- Q:What's the reason why LED bulb gets a lot of heat?
- If the radiator is about the same size, it's not nice to touch the low temperature, because the heat accumulates in it and doesn't come out. The.LED lamp doesn't last long
- Q:LED bulb w can replace 40W incandescent lamp
- D lamp lumen value is ordinary incandescent lamp about 3 times, but LED ball bubble mask transmittance should be based on material, can use 10W or so LED acrylic mask ball bubble instead. Because I received a similar customer complaint, 7W's LED light bulb was replaced with an 20W energy-saving lamp, which was not bright enough.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range