LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m²
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Geomembrane Introduction

Geotextile is a new construction material, which the raw material is polypropylene fiber、polyester fiber、acrylics、nylon and other high polymer, without chemical additives and heat treatment. It is environment friendly construction material.
Based on the length of the fiber, it can be divided to Filament Geotextile and short Filament Geotextile. The tensile strength of filament geotextile is higher than short filament geotextile. The unit weight is from 100g/m2 to 1500g/m2. Geotextile has excellent mechanical properties, superior water permeability, filtrability and deformation adaptive faculty, at the same time, it can resist to corrosion and also anti-aging. It can isolate、filtration、dewatering、protect、firm、strengthen.

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

Geomembrane Specification

1)Material: LDPE/HDPE/EVA,etc


LDPE/HDPE/EVA Geomembrane Liner for Water ReservoirsLDPE/HDPE/EVA Geomembrane Liner for Water ReservoirsGeomembrane Package:

1. PE film inside, and Woven bag outside.

2. Packaged in container.

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

Geomembrane Application:

Landfill lining
Landfills capping
Water reservoirs
Irrigation canals

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

LDPE/HDPE/EVA Geomembrane Liner for Water Reservoirs

Geomembrane Advantage

1.Some raw materials are produced by ourselves, or imported from overboard, so we could control the cost and quality to competitive in the market.

2.  We have research team and laboratory, so we could research new products by ourselves and produce according client’s request.

3. There are more than fifty produce lines, so we could guarantee the delivery time.  

4. We supply our products to many national projects in many countries, so our quality is stable and reliable.

5.  If you have problem during your project when using our product, we could arrange our engineer to help.


- Q: What can we do for the special customer?

  A: Provide custom made service with customer's drawing; We make sure to provide you with the best solutions for your individual case. Whether standard items or non-standard items.

- Q: What can we supply?

  A: We provide high levels of communication from start to finish. 

- Q: What is our advantage?

  A: Top Cemented Carbide has extensive business experience, Fast delivery and high quality.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the sticking methods of computer film?
The methods of sticking film for computer screen: 1, Generally, if you dig the corner of the laptop protective film with yuor fingers, it is very easy dig up a corner, and then pull the corner to tear off the laptop protective film. 2, if it can't be digged up with fingernail, you can prepare two glue to stick a corner of the bottom edge, stick up a corner of the electrostatic film, and then pull the corner to peel off laptop protective film easily. Attention: General protective film is electrostatic film, which can be used repeatedly, so try not to use sharp things to help to tear off the film, which may result in failure to reuse.
Q:How to use geomembrane to plant lotus root?
When planting the lotus root, both geomembrane and composite geomembrane can be used to prevent seepage and resist root. The site on which the geomembrane or composite geo-membrane is laid should be properly treated. Before laying those materials, the site should be levelled and pressed firmly without sharp stones and branches on it. For example, if mountainous ground is uneven, loess should be laid to level it. When the geomembrane is laid, it is strictly prohibited to move machinery on it. Workers that lay the geomembrane should wear flat shoes to walk on it. After the geomembrane is laid, soil of certain thickness needs to be backfilled on the geomembrane to protect it.especially in the area above the water around the lotus pool to prevent the sun exposure and the aging of geomembrane.
Q:How to measure the loss of geomembrane joints and related specifications?
In general, the construction of the geotechnical membrane is mainly by welding, and the lap width is confined to the requirements of the specification. According to the requirements of "the lap width of the sanitary landfill field seepage systems engineering and technical specifications CJJ113-2007 ", lap width of geomembrane: sweat soldering: 100±20(mm) squeezing welding 75±20(mm). According to our factory's experience, in general, the overlap loss of the geomembrane is between the 5%-8%, that is, for each1000 square meters of geomembrane, the loss is 80 square meters to 50 square meters. Construction site whose environment is relatively simple can calculate the loss according to 5%, complex construction site can calculate the loss according to 8%.
Q:Does the electrothermal film consume a large amount of electricity?
Electrothermal film radiant heating is a comfortable and energy-saving heating mode with radiant heat as main principle, usually divided shed plastic film radiation heating, mulching film radiation heating. The latter is commonly used now. Electricity consumption is not very large, the electricity consumption of a 14-square meter room is about 0.7 degrees per hour.
Q:What are the connection methods of geomembrane?
Geomembrane generally adopt the welding method with professional welding machine, whose general welding distance is 30-50 cm
Q:How is electric heating film electric heating
It is good and more environmental friendly! And have a good quality
Q:HDPE geomembrane has good chemical stability, oil is a good anti-corrosion materials GB GB & # 47, the use temperature is110 ℃, resistant to acid, alkali; T17643-20111 HDPE geomembrane is a flexible waterproof materials, low temperature -70 ℃; 3; 2; s), with high anti seepage coefficient (1 × 10-17 cm & # 47, HDPE geomembrane has good heat resistance and cold resistance.
Geosynthetics polyethylene geomembrane new national standard GB / T17643-2011. Submit date is 2011-12-30, standard implementation time is 2012-09-01.
Q:Composite geomembrane (350g / 1.0mmHDPE / 350g) What does it mean?
the specification of composite geo-membrane Geomembrane cloth membrane, also known as two cloths film one film, 0.01-mm high-density geomembrane composite geomembrane on (350g / 1.0mmHDPE & # 47, the thickness of the intermediate impermeable film quality is 1: Both sides of the geotextile (geotextile) mass per unit area is 350 g
Q:slope geomembrane sliding treatment program
Using rough exasperate geomembrane, national standard have technical requirements for the exasperate geomembrane of side slope: CJ / T 234-2006 refuse landfill can use the high density polyethylene geomembrane
Q:How much is PVC composite geotechnical membrane?
Geomembrane is widely used in canal leakproof project. In recent years, the applications of geosynthetics in civil engineering, particularly, a large number of applications and effectiveness in flood rescue project, have arroused high attention of the majority of engineering and technical staff. For application technology of geosynthetics, the country has put forward normative technical requirements from seepage, filtration, drainage, reinforcement, protection and other aspects, which has accelerated the pace of the popularization and application of new materials. The material is widely used in seepage-proof projects in canals. I will give a brief account of application technology of geomembrane combined with the construction practice.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range