KLU32-800 Bored Pile Drilling Rig for Sale
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
KLU32-800 Bored Pile Drilling Rig for Sale
Product Features:
A Wide Choice Of Product: |
>>Our company is capable to manufacture various types of KL series drilling rigs. The max drilling depth could reach 20m to 34m.A wild range of products could be chosen for your practical needs. |
The column of the piling frame has two types, square and round. The former type applies back lift method. It is easily installed, safe and stable. The later type applies front lift method, the support rod will adjust itself when lifting the column. The column is higher, the drilling depth will go deeper. |
|
Higher Efficiency And Lower Consumption: |
>>The hydraulic system uses constant power variable design with low loss.The large flow, low failure rate, and high efficiency piston pump ensures the hydraulic components working well. |
|
high Reliability And Flexibility: |
>>The rotation system works with hydraulic flow. The rotating speed could be controlled to avoid impact. The failure rate is much reduced. The assistant hoist also uses hydraulic winch so the winding speed can be controlled at the operator’s will. Such design provides much convenience in the working process. |
|
Convenience In Dismantling, Transportation And Maintenance: |
>>With many years improvement and seeking for perfection, each part of the machine has well considered its convenience in dismantling, transportation and maintenance. The height and width of the largest part is designed within the range of transportatio lmits. |
|
Humanized Design: |
>>Much effort has been taken to increase the technical content on our products as well as humanized design. The machine is integrated with mechanical, electrical, hydraulic, and electronic devices. The appearance of the machine body, the comfort of the operator, the agility of the movements and so on are all well considered when designing the machine.Remote-control handle is optional due to the client's needs. |
|
Unique Design: |
>>After many years of experience in manufacturing the machine and analyzing feedbacks from our loyal clients, we made unique improvements in the easy-malfunction parts on the drilling rig: The bottom pillar of the column uses universal joint to enable the pole adjusted from left-right and front-back directions. The side support adjustment mechanism uses hydraulic motor instead of electrical motor which may affect the adjustment stroke or worm and gear which may shorten the life period. The supporting leg cylinder base uses large round box structure to avoid distortion at the working process. |
|
Multi-function: |
>>KL series is our new generation multi- function piling frame: with different power plant it can not only be used to do bored pile drilling or construct continuous wall by SMW method, but also do diesel hammer or hydraulic hammer pile driving. |
KLU32-800 | ||
---|---|---|
Move method | Electro-hydraulic step | |
Max drilling depth | 32m | |
Max drilling diameter | φ800 | |
Max output torque | 65KN·m | |
Rod rotated speed | 18r/min | |
Allowed lifting force | 640KN | |
Power for power head | 55KWX2 | |
Reductor of power head | ZZSH480 | |
Leader size | φ630X10 | |
Leader height | 37m | |
Leader oriented center distance | 600Xφ102 | |
Leader incline range | 5°front inclination 3°back inclination | |
Length of crawler on the groud | 4.3m | |
Width of track plate | 800mm | |
Climbing ability | <4° | |
Rotary | Rotary way | Rotary motor |
Rotary angle | ≤360° | |
Rotary speed | 0~0.3 | |
Main winch | Single pulling force | 7T |
Increasing speed | 1.8/2.2/2.6 | |
Motor power | 22KW | |
Assist winch | Single pulling force | 3T |
Increasing speed | 20m/min | |
Motor power | 11KW | |
Overall dimension(L*W) | 11.5m×6m | |
Total weight(T) | 78T |
FAQ
1.Which payment terms can we accept?
Normally we can work on T/T term or L/C.If you choose T/T,30% payment is required in advance and 70% balance shall be settled before shipment often,it rang a little.
2.How long will our price be valid?
We are friendly dealer, never greedy windfall profit, our price remains stable,except the exchange rate and the increasing labor cost and material cost.
3.What are our advantages compared with manufacturers?
a.Detailed training-We can provide training services to different users. The training sessions include product training,operating training, maintenance know-how,standard and so on to fulfill your individual needs.The training can be conducted at client’s site.
b.Available after service-With our global distributor network, you are guaranteed with fast deliveries and services if you submit your requests.
- Q:Several common pile foundations and pile driving techniques
- Sinking into the pile foundation - Hammer Sinking Pile into the pile, the main construction methods are: Hammer Sinking Pile, vibration pile, static pressure pile and immersed pipe pile. The hammer sinking pile is generally applicable to medium density sand soil and cohesive soil. Because the pile driving hammer will sink the pile and hit the pile against the impact energy of the pile hammer, so the general pile diameter can not be too large (not more than 0.6m), and the buried depth is not greater than 50m. Sinking pile foundation pile, cast-in-place pile is the reinforced concrete or steel pipe pile tip with valve pile tip at the bottom of the sleeve, sinking to the required depth by hammering or vibration, the tube placed inside the reinforcement cage, concrete pouring, pull out pipe forming.
- Q:How did the pile of clay work after the pile driver finished?
- Friction end bearing pile -- the pile whose load is mainly loaded by the end of pile.Method according to construction methodBored piles: bored piles, immersed tube cast-in-place piles, hand dug bored piles, and explosion enlarged cast-in-place piles.In addition, the hole forming methods are: manual digging, mechanical drilling (positive cycle rotary method, reverse cycle rotary method, auger drilling method, drilling rig drilling method, etc.).
- Q:The difference between diesel pile driver and impact drilling machine
- Percussive drill: like percussive drilling, it is drilled out during impact.
- Q:How many hours will it take for the 200 piles and the 1 pile drivers?
- Because there is a piling process: measurement line - out pile connection - send pile inspection -- moving pile pile machine in place -- the original check -- prefabricated pile precast pile lifting pile stabilizing pile -- -- --.It depends on what kind of pile, the diameter of the pile, the geological condition, the construction site, the construction organization and so on.Taking prestressed pipe pile of 18M as an exampleAbout 20 per day, about 10 hours / day, and that is exactly every half an hour. This refers to the "stability, pressure, connection and delivery" critical progress, because other schedules can be arranged in parallel. While not completely parallel arrangement, the efficiency drops by half, that is, it takes 1 hours to hit a pile.So it takes a lot of skilled workers to finish the job faster.
- Q:What are the types of construction piling? What are the characteristics?
- Pile foundation treatment has many ways, but according to the current market situation and the country's strict requirements for the foundation, many processes are not applicable, such as manual excavation, etc., the following are common and common process methods.According to backfill points: commonly used are lime soil pile, plain soil pile, cement pile, garbage pile and so on.According to the backfill compaction type: clamping rod hammer compaction, heavy hammer compactionAccording to the hole forming process: the diesel hammer is immersed in the hole, the spiral drilling hole, and the Luoyang shovel holeIn accordance with the general classification of hole forming and compaction type: diesel hammer hole clamping hammer tamping hole; diesel hammer tamping; spiral drilling tamping (DDC); Luoyang shovel hole tamping and spiral drilling concrete pile (CFG). And what you say, pipe pile and fish, hammer, strong rammer are also belong to composite foundation. Among them, the pipe pile is divided into static pressure pile (suitable for static pressure machine into the ground) and diesel hammer pipe pile (diesel hammer directly into the ground).Several of the above are mainly to eliminate collapsibility and increase the composite bearing capacity, which belong to composite foundation.
- Q:Under the high voltage line, within two meters on both sides, no pile driver shall be installed
- No piling machine shall be installed within 10m on both sides of high tension line.
- Q:I have two pile drivers, followed by engineering piling, what qualifications do you need?
- You two cars too little, and the project is not enough
- Q:I've heard that money is good. Where do you sell better quality?
- Yunnan is red soil, soil viscosity is relatively strong, strong choice, pile driving machine, no artificial shovel soil, as long as there is a live three months can earn the cost of piling machine
- Q:What does piling mean?
- Piling is the construction of pile foundation, that is, the prefabricated pipe pile pressed into or into the soil; also can be said that the construction of concrete pouring pile and so on. Piling is a popular term.
- Q:How much money piling machine, which is good
- Depends on how big you buy, Shandong force strong pile driving function to play within 20 meters deep, within a meter of aperture, online direct search can find him
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
KLU32-800 Bored Pile Drilling Rig for Sale
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords