Iron Butterfly Valve DN1000

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Technical Date:

Size: DN40-DN1200

Nominal Pressure: PN10/PN16

Operation Temperature: -10°C~150°C

Suitable Medium: Water,Sewage,Seawater,Gas,Food,Oils,etc.

2. Standard

Design Standard: GB/T 12238-2008

Structural Length: GB/T 12221-2005

Top Flange dimensions: ISO5211

Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125

Type of connection: Wafer Type

3. Feature:

 This valve is mainly composed of body, butterfly plate, valve shaft, seat and transmission devices. Simple and compact structure, small portable, convenient for transport, install and dismantle. 90 degrees of opening and closing, switch quickly, operating is small, light energy; Sealing performance is good, service life is long, can achieve zero leakages. Flow curve tending to straight line, excellent regulation performance.

4. Sealability:

The valve for rubber seal, closing butterfly plate and seat sealing performance is good, two-way sealed good performance and the torque is small. the friction is very small between butterfly plate and the seat seal. The valve shaft drive the butterfly plate, butterfly plate do 90 degrees rotation. Butterfly plate flexible for opening and closing, no card acerbity, beating phenomenon, small torque.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:QUestion about Valves during cardiac cycle?
A heartbeat is a two-part pumping action that takes about a second. As blood collects in the upper chambers (the right and left atria), the heart's natural pacemaker (the SA node) sends out an electrical signal that causes the atria to contract. This contraction pushes blood through the tricuspid and mitral valves into the resting lower chambers (the right and left ventricles). This part of the two-part pumping phase (the longer of the two) is called diastole. The second part of the pumping phase begins when the ventricles are full of blood. The electrical signals from the SA node travel along a pathway of cells to the ventricles, causing them to contract. This is called systole. As the tricuspid and mitral valves shut tight to prevent a back flow of blood, the pulmonary and aortic valves are pushed open. While blood is pushed from the right ventricle into the lungs to pick up oxygen, oxygen-rich blood flows from the left ventricle to the heart and other parts of the body. After blood moves into the pulmonary artery and the aorta, the ventricles relax, and the pulmonary and aortic valves close. The lower pressure in the ventricles causes the tricuspid and mitral valves to open, and the cycle begins again. This series of contractions is repeated over and over again, increasing during times of exertion and decreasing while you are at rest. The heart normally beats about 60 to 80 times a minute when you are at rest, but this can vary. As you get older, your resting heart rate rises. Also, it is usually lower in people who are physically fit.
Q:What does the model D373H-16C of butterfly valve mean?
D373H-16C said: D type butterfly valve butterfly valve 3 said, said 7 of the turbine, said clip, 3 said the three eccentric (swash plate), 16 C nominal pressure, said carbon steel. In fact, if you want to understand this, to understand the valve 3.07ghz, later met have to be attached to the valve. 3.07ghzModel for valves, valve number indicates valve type valve should normally be that type, drive type, connection type, structural features, nominal pressure, sealing surface material, body material and other factors. Standardization of the valve type of valve design, selection, distribution, provide more convenient. The type of valve types and materials are more and more more models of the preparation of the valve will become more and more complicated. Although the preparation of our valve type unified standard, but gradually can not meet the needs of the valve industry. At present, the valve manufacturer usually adopt a unified numbering; not uniform numbering, the manufacturer can make out no.methods according to their own situation. Unit two unit three unit four unit five unit six unit seven unit
Q:mitral valve prolapse?
it can cause atypical chest pain but rarely leads to serious problems
Q:What are the major disadvantages of butterfly valves?
Also known as butterfly valve, control valve has a simple structure, can be used for low pressure pipeline valve switching control is closed parts (disc or disc) is a disk, around the valve axis to achieve the opening and closing a valve, the valve can be used to control the flow of air, water, steam steam, all kinds of corrosive medium, mud, oil, metals and radioactive liquid media and other types of fluid. On the pipeline, mainly from cutting and throttling. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation.shortcoming1, use pressure and working temperature range is small.2, poor sealing.Butterfly valve can be divided into bias plate, vertical plate, inclined plate and lever by structure. According to the form of sealing, can be soft sealed and hard sealed type of two. The soft sealing type usually adopts rubber ring seal, and the hard sealing type usually adopts metal ring seal.According to the connection type can be divided into flange connection and clamp type connection; according to the transmission mode can be divided into manual, gear drive, pneumatic, hydraulic and electric several.
Q:Which is better, the round two lobe butterfly valve?
The company has advanced sheet metal CNC processing line, strong technical force and strong production capacity. At present, the main products are: air outlet, air valve, muffler, fire damper, static pressure box, wind box, etc.. Especially round type double butterfly butterfly valve has obvious advantages.
Q:How do hydraulic butterfly valves work?
3. butterfly valve hydraulic drive device structureThe valve hydraulic device is mounted on the valve drive shaft. The driving shaft of the valve is fixed with a transmission spline, and the crank (with an outer spline) is sleeved on the driving shaft. When the hydraulic system works normally, through the gear sleeve, the transmission spline is connected with the crank. Thus, the hydraulic cylinder drives the crank, and the spline on the crank passes the torque to the transmission spline by means of a gear sleeve. Because the driving spline is fixed on the driving shaft, the driving shaft rotates and drives the valve plate to start and close. A section of optical axis is arranged at the end of the driving shaft and is inserted into the end of the manual shaft (matched with the clearance of H11/ H11), and the function is that the manual shaft is concentric with the main drive shaft. In normal operation, the optical axis rotates with the drive shaft, but the manual device does not move. When the hydraulic operation is performed manually or manually from the hydraulic unit, a * * * conversion is required. The utility model is composed of a nut, a hand wheel, a screw rod, a support frame and a shifting device. When the utility model is switched, the hand wheel is rotated and driven by the screw rod to move. A guide rod is arranged on the bracket to make the shift and translation stable.
Q:butterfly valves d7a1x5
D71x-1.6? Or D371X-1.6, do you need butterfly valves for production or butterfly valves? The question perplexed us all.
Q:HOW TO CHANGE THE PCV VALVE HOSE?
So, the rubber elbow hose has a hole in it. Your best bet is to get the replacement from the Ford dealer. Yes, you can buy just the elbow part from the parts counter at the dealer. If they start acting all dumb (and won't help you or sell you the part) then, go to a different dealer for the part. Another thing you could try is a used one from the junk yard BUT, it's been my experience that the rubber gets too hard and the PCV valve needs a lot of encouragement to be removed. Sometimes you'll damage the used elbow by trying to get it off of the engine or removing the old PCV valve to put in your replacement valve. That's why I recommend getting a new one straight from the source. They are pretty simple to change with ordinary hand tools and some mechanical know-how. You just pull the elbow off of the port that it's attached to on the engine. The valve will probably have a steel clip that goes around the hose at one end of the valve inside of the hose. You simply squeeze the clip with a pair of pliers and tug at the valve until it comes out of the elbow.
Q:Old Thompson Aircraft Engine Valve, help dating?
Wow Hannah! That's a cool find for sure! It appears to be possibly a valve for a radial aircraft engine as it looks very similar to ones i've seen used in Pratt+Whitney R3350's etc. It looks like it could probably date to the 1940's up thru the 1950's. Look for a Part Number stamped on the valve or on the box. After WW2 there were all kinds of manufacturers making parts for airplanes. Many were gobbled up by competitors, converted to manufacturing other products or went out of business altogether. However, a few did hang on....and I think this may be what has become of Thompson Aircraft today.... Thompson Aerospace, Inc 22431 Antonio Parkway B160-102 Rcho Sta Marg, CA 92688-2804
Q:What is the principle of butterfly valve and check valve? Any difference?
Crown valve pressButterfly valve is butterfly valveThe check valve is a check valveButterfly valve is mainly switching functionThe check valve mainly stops the pipe from flowing backwardsThe two can only be said to be valvesThe others are different

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range