1.flat panel solar water heater:very popular solar products all over the world
2.solar keymark ,ISO ,EN12976 ,ROSH
Adantage of flat plate of solar water heater
1.Safe and steady
Solar collector uses all cooper fluid tube; System operating is steady; components are not easy to be damaged;
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa; the hot water is forced to stream out from the top; it is convenient to use.
3.High heat efficiency
Absorbing coating of the collector is black chrome and blue sputtering; absorbing rate is 92-96%, and emission rate is 5%-15%; heat efficiency is high
4.Good temperature preservation
Thickness illustration layer is 65mm; constant temperature high pressure quantitative foam; less than 5 Celsius Degree per 24
5.Long using life
Inner tank is 2mm high quality steel with 4mm cross linked polyethylene; resist high temperature and corrosion; 30 years using life.
6. Several models fulfill different user need
According to customers requirement, we put our several modes with different specifications to suit flatlet, villa, hotel and factories. , etc
In order to suit different kinds of building construction, we search and produce several kinds of bracket construction, which are convenient to install and handsome appearance.
System has freeze resisting function which can be used in high latitude and cold area whether summer and winter.
Details of Split Solar Water Heater
1. Inner tank :SUS304 stainless steel
2. Insulation: polyurethane foam,
3. Outer tank: Color plates
4. P/T relief valve, electrical heater
5. element, magnesium bar
1. Coating: Black chrome
2. Absorptance: ≥95%±2%
3. Emittance: ≤8%±2%
4. Textured Tempered glass, 3mm
5. Material & thickness of frame: Aluminum alloy, 4mm
6. Insulation layer: Fiber glass cotton, 40mm
7. Working/Test pressure: 0.6/1.2MPa
1. ETD: 20days for 20'GP container
2. The port of loading: FOB SHANGHAI
3. Guaranty: 3years for the water tank,
4. Electric heater: 1.5/2.5kw
- Q:Solar water heater for a long time will not be bad
- Therefore, if you travel, travel or long-term home, should arrange for others to put hot water on the cold water, or in the vacuum tube collector placed on the cover to block the sun, to go home and then remove. Remove the vacuum tube can also be placed in the home store, then install to be re use (the maintenance method generally used less, but because of the existence of security risks, the user can not disassemble, if necessary, with the local dealer and coordination).
- Q:How to turn off the solar water heater
- Most of the heat is only transmitted to the glass tube inside the water, the water heating glass tube, heating the water light along the glass tube heating surface to enter the insulation water storage barrel, the barrel temperature is relatively low water along the glass tube into the back surface of glass tube, this constant cycle, the heat storage barrel the water is heated, so as to achieve the purpose of water.
- Q:How to identify the solar water heater is good or bad?
- Insulation layer must be careful. The vacuum tube is pulled out, can be used in accordance with the insulation layer of polyurethane foam as a whole, if the hand by a soft feeling, then the foam, its short service life and easy to leak. If the hair is hard for polyurethane, with excellent thermal insulation performance.Depends on whether the stainless steel bracket genuine". Some water heaters say they are ultra-thin stainless steel stent, in fact, the texture is very poor, even galvanized support is not as strong. So be careful when choosing. At the same time it should be noted that, under normal circumstances, each person's water consumption is about 30-40 liters, consumers can choose according to the number of people in their own home to the corresponding capacity of the water heater.
- Q:Buy solar water heater enough to wash five people how much money
- Rainy weather heating and hot water utilization rate is fast, but also greatly reduced after-sales service, both time and energy saving. This type of solar energy than ordinary single warehouse in the absence of the sun heating time is only 20-30 minutes, and a single warehouse needs 2-3 hours!
- Q:Solar water heater and radiator can be connected?
- Solar water heater and radiator can be connected.1, solar water heater in the sun when the water temperature can reach 80 degrees, can meet the heating requirements;2, due to the instability of the solar energy, the need for auxiliary heat source, in the absence of the sun when the heating system heating;
- Q:What is the specification of the water supply pipe of the solar water heater?Plastic tube diameter is asked
- Under normal circumstances are 20 caliber pipe. If the customer home water flow is small
- Q:What are the requirements of domestic solar water heater
- Shortcomings:1 large area on the floor of the installation of insulation;2 hot water pipeline for more than ten meters, each use to waste a lot of water;3 the need for a full day of sunshine in order to heat the water, when the weather is good can only ensure that there is hot water at night, during the day and at night there is little hot water available, can not guarantee the user 24 hours hot water supply, poor comfort;4 solar water heater lighting board must be installed on the roof, both large and heavy, but also affect the construction of the beautiful (the more obvious the more high-end residential areas), but also easy to damage the roof waterproof layer;5 photoelectric complementary, in fact, can not be properly implemented.6 now more than 99% of the market are very backward, non pressure type, commonly known as the water". The water, the water is only a water pipe, the use is very inconvenient, simply can not talk about comfort.
- Q:How to use solar energy water heater with air heater
- I can do hot air heating engineering, the problem can be answered!Here to confirm a master and auxiliarySolar love limit is larger, there should be sunshine, small heatAir can be more powerful, not subject to weather restrictions, water productionReasonable approach is to air energy, solar energy, supplemented by the program
- Q:What is the principle of wall mounted solar energy?
- 1 working principle of flat plate collectorThe hot water system is fin flat plate collector which will absorb solar radiation into heat energy, the heat collector tube and the refrigerant temperature rising, the hydrothermal features of low density, cold liquid density, through the circulation line, the formation of cold water at the top between the heat collector and the water tank, hot water from the natural circulation. Through this cycle, so that the water tank gradually warming. Since the working fluid in the flat plate collector is a low temperature resistant liquid, it can be kept at 40 degrees below zero. So even if the cold area, the normal operation of the year.
- Q:Why is the heating surface of the solar water heater tilted
- So the more flat the heat collection plate, the larger the area can be heated.But it can't be put flat.
Up to now, we've been formed a whole system of researching, developing, and marketing for this line.We have a forever faith that excellent quality, sincere cooperation, knight after service, are the basis of our success. To benefit the human beings is our eternal endeavor. We welcome you to visit us and please be free to contact us for further information.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||North America; South America; Southeast Asia; Africa; Oceania; Mid East; Western Europe
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range