Insulation Tape of New Style of High Quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of KC71 Tape
• KC 71 is a self-amalgamating ethylene propylene rubber (EPR) tape used on solid dielectric cable for electrical insulation and jacketing in splices up to 69Kv and for building stress cones in terminations up to 35kV.
• The tape comes with a separator that is removed during the taping process.
• Its 0,76mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof.
• KC 71 is suitable for use with conductors rated at 90°C with an emergency overload rating of 130°C.
• The tape is also resistant to corrosion, chemicals and ultra violet light.
• KC 71 fully meets the Table 1 requirements for Type III tape in ASTM D 4388.
Dimensions of KC71 Tape
1” x .030” x 16.4'
25mm(width) x 0.76mm(Thickness) x 5m(length)
Consult us for other sizes
Specifications of KC71 Tape
Applications of KC71 Tape
• Electrical insulation and jacketing in splices of solid dielectric cable up to 69kV
• Building stress cones in terminations of solid dielectric cable up to 35kV
• Jacketing of indoor terminations
• Bus bar insulation and corrosion protection
• Jacket repair and restoration in all types of cable
• Moisture sealing applications
FAQ
Q1.Can we have the customized size tape?
A1:Consult us for other size
Q2:Is this Tape environmental-friendly?
A2:This tape is flame/arec resistance and environmental-friendly.
Q3:Can we have the sample/trail order to test quality?
A3:Surely we support the sample/trail order.
- Q:PVC does electric tape belong to rubber?
- The name is polyvinyl chloride electrical insulation tape, belonging to electrical plastic products.
- Q:What's the quota for PE membrane isolation layer?
- 1.2 thick polyethylene geomembrane fixed: Materials 15 yuan / square meter, artificial 4 yuan / square meter.
- Q:What material is the base material of PVC electric tape?
- The base material is slightly foamed PVC plastic, and the pressure-sensitive adhesive is applied on the bonding surface, and the adhesive effect is achieved
- Q:Why are bare wires tied with black tape?
- PVC electrical tape.Electrical tape is coated with a layer of rubber pressure sensitive adhesive. Polyvinyl chloride film (PVC film) has the characteristics of electrical insulation, flame retardancy and weather resistance, and rubber pressure-sensitive adhesive has initial adhesive strength and adhesive strength. It is suitable for all kinds of wire and cable insulation winding,
- Q:What's the difference between an electrostatic tape and an PVC tape?
- Polyester electrical tape, also known as Myra tape, is made of polyester film and solvent based pressure-sensitive adhesive, tensile strength, high temperature resistance, used in the manufacture of various transformers.
- Q:What's the difference between waterproof tape and PVC tape?
- Suitable for automobile wiring, wire winding, insulation protection, etc.. Polyester electrical tape, also known as Myra tape, is made of polyester film and solvent based pressure-sensitive adhesive, tensile strength, high temperature resistance, used in the manufacture of various transformers.
- Q:Theoretical dosage of polyethylene anticorrosion insulating tape
- How much area of the pipe, just how much tape, because there is overlap overlap parts, plus 50% tape... This is in theory,,,In fact, there is no theoretical dosage, customers are required to use the number of how much,I, do,,,, this,,,
- Q:Toilet water pipe seam water seepage, with raw tape tight, can you?
- Note: the purpose of fighting waterproof guards is to make the water pipes inside the floor forming waterproof layer, so that water is not in the floor water seepage, so as to avoid other floor water seepage. The second is from upstairs. First check the water pipe and the ground seam is intact, whether there are cracks, cracks in the gap. If the gap is damaged, drying condition, put the loose broken filling materials clean, and then use the kitchen and toilet water spray over the ceramic tile aperture, 20 minutes after drying for the treasure of the joint damage to fill the gap tile.
- Q:PVC insulation tape can withstand high temperature for a long time without aging failure
- This is not high temperature, the maximum temperature can only be 60~70 degrees, and then high will become soft or melt, 60~70 degrees can continue to use 1~2 years
- Q:Reasons for tape degumming
- First, the glue is not sticky enough;Two, PVC quality is poor, the plasticizer migrates to glue, destroy glue stickiness.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Insulation Tape of New Style of High Quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products