Antiflaming,fire-resistance rubber hose assembly
High pressure hose to the winding wire matrix, skin coated refractory coating layer steel braided flame retardant layer and laye
APPLICATIONS:It is mainly used in high temperature surroundings and in conditions having heat source or heat radiation source,such as oil field well-control,metal smelts,and chemical industry
Inner Diameter of Hose mm
Reinforcement Diameter (mm)
Outside Diameter (mm)
Work Pressure (MPa)
Proof Pressure (MPa)
Minimum Explosive Pressure (MPa)
Minimum Bending Radius mm
hydraulic hose Universal Wire-braided DN6
· Place of Origin: Hebei, China (Mainland)
· Brand Name: CMAX/CNBM
· Model Number: GB/T3683-92
Packaging & Delivery
hydraulic hose is wrapped with fabrics
Universal Wire-braided Hydraulic Hose, Q/FLT01-AStandard GB/T3683-92, Temperature range: -40 to +100
Universal Wire-braided Hydraulic Hose
Tube: oil resistant synthetic rubber
Reinforcement: 1 W/B (one high tensile steel wire braid)
Cover: abrasion and weather resistant synthetic rubber
Temperature range: -40 to +100.
- Q:What does rubber soft joint "KDTF" mean?
- KDFT flexible single ball rubber joints of rubber joints, rubber flexible connector is made of fabric reinforced rubber parts and flat joint, loose metal flange or threaded pipe flange, joint for pipe vibration noise reduction, displacement compensation.
- Q:Can the copper tube of GREE air conditioner be changed into rubber tube?
- The refrigerant has a strong penetration capacity and can withstand high pressure. It doesn't mean the refrigerant doesn't run.When the air conditioner is refrigerated, the refrigerant oil is mixed together in the refrigerant and flows in the system. The freezing oil reacts with the rubber products and makes the rubber products rapidly aging and fail, unless the special rubber hose is purchased.
- Q:The engine cylinder head cover behind the drop rubber tube what reason (Xichai 490 engine) (note the valve chamber cover tube)
- Air conditioning water pipe, the specific recommendations on the map below, I hope my answer can help you.
- Q:Is it feasible to use rubber material, middle canvas layer and outer rubber material in PVC rubber tube?
- Improvement measures: 1, adjust the process, plastic material in place; mixing rubber plastic stability; vulcanized rubbing with low temperature long time vulcanization; 2, test cloth in curing temperature shrinkage coefficient is too big, consider changing cloth;
- Q:What are the materials used in rubber joints? What are their advantages?
- While the three EPDM is ethylene propylene diene hydrocarbon, and non yoke of three yuan is the main characteristic of copolymer, excellent oxidation resistance, ozone resistance and anti erosion ability, also has excellent curing characteristics. Simple speaking is resistant to high temperature.The nitrile rubber by emulsion polymerization at low temperature, excellent oil resistance, high abrasion resistant, good heat resistance, strong adhesion. (oil).
- Q:Water heater hose 4 points and 6 points difference
- 4, in charge of and 6 in charge, from the caliber is obvious to see out, 6 in charge of greater than 4 in charge. Inside diameter 4 inches, have 13.2 millimeter about, 6 inches are 19.8 millimeter, 6 inches of pipe than 4 inches big. 6 points in diameter 1.6cm, 4 points in diameter 1.2cm, see thickness can be distinguished, 4 branch pipe diameter is 20mm, and 6 points water pipe diameter is 25mm, general heating with 6 points, slightly thick. The tap water is 4 inches fine.
- Q:How to detect the reliability of rubber hose
- Hydraulic test verification pressure test: Test hose and assembly under verification pressure, continue 30s-60s, whether to produce leakage, deformation and damage. Compression deformation test: keep 1 minutes under the specified pressure (work pressure, verification pressure or other pressure below the proof pressure), measure the length and diameter of the hose, twist angle and bend. Bursting pressure test: Determination of the pressure at which the hose burst during the specified step-up rate. Leak test: save 5min at 70% of the minimum blast pressure, and check again and again for leaks or damage. Due to the fact that water is often used in tests, the pressure and leakage pressure at normal temperatures may be slightly lower at normal temperatures.
- Q:The copper joint is leaking, and the tap water hose and copper joint are leaking
- 1, the expansion of aluminum pipe is not expanded, and re - do the side.2, copper joints are non-standard products, replaced by standard parts.
- Q:Is the rubber pipe joint installed in the middle of the pipe and pump for shock absorption?
- According to the pumping station environment, the noise source is not close to the pump house for sound insulation treatment, the noise of the pumping room will be taken sound absorption / sound insulation treatment, doors and windows should do sound insulation treatment, and so on.
- Q:Are the bridges, bellows and rubber tubes drawn out or are they drawn only? And the bellows are tensioned with the steel strand?
- It is relatively rare, usually corrugated pipe for zinc metal corrugated pipe, the construction unit may be in order to prevent pipe blockage, when pouring concrete, the corrugated pipe with rubber tube, after pouring completed final setting, you can pull out rubber tube. Bellows need not be drawn.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range