HS Self-propelled Scissor Lift
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Self-propelled scissor lift platform:
Model | ZSJY0.3-6 | ZSJY0.3-8 | ZSJY0.3-10 |
Table Size(mm) | 1900*800 | 2150*1000 | 2600*1000 |
Total Dimension(mm) | 1900*800*1100 | 2300*1000*1400 | 2750*1150*1560 |
Lifting Height(m) | 6 | 8 | 10 |
Work Height(m) | 7.7 | 9.7 | 11.7 |
Capacity(KG) | 300 | 300 | 300 |
Stretchable Capacity | 100kg | 100kg | 100kg |
Net Weight(KG) | 1100 | 1700 | 2100 |
Drive: battery | DC24V/240AH | DC24V/400AH | DC24V/400AH |
Power rate | Travel:1.2kw*2 Motor:2.0kw | Travel:1.2kw*2 Motor:2.0kw | Travel:1.2kw*2 Motor:2.0kw |
Travel speed | 0-4km/h | 0-4km/h | 0-4km/h |
Lifting speed | 3-5m/min | 3-5m/min | 3-5m/min |
Features:
1.Types of lifting power:Battery, electrical, accumulator or diesel.
2.The scissor lift can be moved conveniently, and has bigger platform, bigger lifting capacity to take several people to work on it together.
3.In special circumstance, the scissor lift will use explosion-proof electric equipment
4.This scissor lift is widely used in street lamp repairing, aerial work, aerial work suspension equipments in the workshop, square, gas station, electricity equipment maintaining, and steel structure building
- Q:The hydraulic platform can't rise. Why?
- There's a problem with the control system, maybe that part of the circuit is in bad contact
- Q:What kinds of tables are there? Which is better for the office?
- Hand. This is a waste of time and noise. 2: electric. Electric lift, mute. The downside is that you need to replace the whole table. 3: lifting platform. This is a table that is on the table, which is placed directly on the table and does not need to be installed.
- Q:Can the stepping motor drive the hydraulic platform?
- Are you a driver for this motor? But the normal step motor is only for torque, step Angle, phase number, not for rotational speed; It may be a servo motor or torque motor, and if the speed is low it is the possibility of torque motors. In addition, you can measure the current, voltage or waveform below.
- Q:What certificate is required to operate hydraulic platform
- The operation hydraulic platform, under 500 kg, does not require a certificate, more than 500kg can use the production manufacturer's safety production license.
- Q:How to improve the oil leakage line
- The line itself I think should be no problem, I don't know where your oil spill is. I think it's an interface leak, Or a hydraulic cylinder leak, And is your job stress reasonable? Is it too stressed?
- Q:How does hydraulic platform change sealing ring, how to operate
- Because the concrete structure of hydraulic cylinder is different, the order of disassembly is different, and it should be judged according to the specific situation.
- Q:How does the elevator repair
- All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)
- Q:What is the reason for the automatic lowering of the hydraulic platform
- The overflow valve opens and closes and is not properly closed, and checks for leaks.
- Q:The hydraulic platform is compared with the normal lift platform
- Compact structure, small size of transportation, can enter the car of general elevator and pass through door and narrow passageway smoothly.
- Q:Does the fixed hydraulic platform need to submit to the specification requirement
- Lift platform, mobile elevators, cargo-lifts equipment, such as the regulations of the state, load is larger than 500 kg of belong to special equipment, is the need in the local quality supervision of special equipment inspection. First, look at the equipment capacity is over 500 kg, then you should go to the local quality inspection of special equipment department to put on record, first need information: including manufacturer's business license, tax registration certificate, organization code certificate, production license of special equipment, special equipment installation and maintenance license, there are different from region to region, it's best to make a phone call to prepare the material.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
HS Self-propelled Scissor Lift
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 500 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords