Household Foil Household Foils Using Alu

Ref Price:
$2,450.00 / m.t.
Loading Port:
Shanghai
Payment Terms:
TT or LC
Min Order Qty:
3 m.t.
Supply Capability:
100 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Specification


household foil household foils USING ALUMINIUM


Application: Household packages


Alloy: 8011/ 1235


Temper: 0.009mm-0.04mm (±6%)


Width: 200mm-720mm


Mechanical Properties: Tensile Strength (U.T.S)≥ 50Mpa, Elongation≥ 1%


Standard: GB/ T3198 / ASTM-B209/EN 546


2.Description


Aluminium foils thicker than 25 µm are impermeable to oxygen and water. Foils thinner than this become slightly permeable due to minute pinholes caused by the production process.

Aluminium foil has a shiny side and a matte side. The shiny side is produced when the aluminium is rolled during the final pass. It is difficult to produce rollers with a gap fine enough to cope with the foil gauge, therefore, for the final pass, two sheets are rolled at the same time, doubling the thickness of the gauge at entry to the rollers. When the sheets are later separated, the inside surface is dull, and the outside surface is shiny. This difference in the finish has led to the perception that favouring a side has an effect when cooking. While many believe that the different properties keep heat out when wrapped with the shiny finish facing out, and keep heat in with the shiny finish facing inwards, the actual difference is imperceptible without instrumentation. Foil may have a non-stick coating on only one side. The bright aluminium foil is 88% while dull embossed foil is about 80%.


3.Why you can choose us?

Our quality and reputation are all the best in China!


4.Pictures

Household Foil Household Foils Using Alu

Household Foil Household Foils Using Alu

Household Foil Household Foils Using Alu

Household Foil Household Foils Using Alu


5.FAQ

1)What's kind of payment term we can supply?

CIF,CFR, FOB and other.


2)Can we supply samples?

Yes, we can!



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the use of the aluminum tape?
Taking aluminum foil as the base material and then coated with acrylic adhesive, aluminum tape is featured by high peel strength, excellent adhesion and oxidation resistance, corrosion resistance and flame resistance. Aluminum foil can be classified as common aluminum tape, conductive aluminum tape, high peel strength aluminum tape, reinforced aluminum tape, clip marine welding aluminum tape, aluminum tape for heater, etc., so the effects are different. For example, the commonly used aluminum tape is mainly used for binding cold (hot) gas pipeline in cold (warm) gas engineering and water heater manufacturing. Conductive aluminum tape is commonly used for eliminating electromagnetic interference (EMI), isolating electromagnetic wave to human body harm and avoiding unnecessary voltage or current that may influence its function in all kinds of transformers, mobile phone, computer, PDA, PDP, LCD displays, notebook computers, copiers and other electronic products in which electromagnetic shielding is required. electromagnetic shielding. Conductive aluminum foil has several types, like double-sided conductive aluminum foil and single-sided conductive aluminum foil. .
Q:There are some aluminum foil, some stainless steel and ABS plastic under the sink That would be a little better? Twenty
What do you think of these 3 materials? Actually, lie on the foil. It's OK to wrap it. The foil should be wrapped on the side panel. It only covers the floor. It looks nice and waterproof,It's better to have the roof18 of the board is relatively good, single also look at the brand, personal recommendation true! Lushuihe, as to how to tell your own eyesIs the price of quartz stone? I have a false quartz stone in a word! You can't tell the difference by yourself, but you can't tell a word in half
Q:Can foil paper be used in a microwave oven with barbecue? Thirty
As long as the microwave condition is not heated with metal ware, which is why you machine sparks, the mistake of using multiple mica film will be in the furnace cavity was black, serious will put cardiac magnetic tube for breakdown, this one thing but to free 130 yuan the security, if not only for the need to pay 130 yuan plus overhaul costs 35 yuan, because the scope for large to overhaul.The light will not need to take into account so many vessels of the limit, you only need to remember the vessels not long time heating low melting point is good, light, easy to tell you, in fact is the original barbecue, barbecue is light effect better than before.
Q:Do I have to use aluminum foil for curtain walls?
We are rock wool board manufacturers, we provide glass curtain wall site is affixed to aluminum foil, the specific specifications we do not understand
Q:Aluminum-foil paper glues on the radiant-cooker after melting. How to remove it without hurting the radiant-cooker?
Heat it and than tear it down.
Q:What is the thermal insulation principle of aluminum tape?
Since aluminum is a good conductor of heat, wrapping the tape with aluminum foil does quicken the heat loss instead of heat preservation. Therefore, it's better to wrap with heat-insulated cotton before wrapping with aluminum foil. Actually the thermal insulation cotton preserves heat rather than the aluminum foil which serves as a conductor to outside temperature to protect the inside temperature. It is featured by thermal insulation, waterproofness and corrosion resistance. Due to its extremely low absorption coefficient solar radiation, it can isolate from most of the heat transfer.
Q:How do I tear the foil off the wall?
If it's on the tile, you can buy a cleaning shovel with a wallpaper and a blade on it
Q:Development prospect of aluminium foil
Introduction of several key aluminium foil products(I) air conditioning foilThe air conditioner foil is a special material for the heat exchanger fin of an air conditioner, and an early air conditioner foil is a plain foil. In order to improve the surface properties of the plain foil, an anticorrosive inorganic coating and a hydrophilic organic coating are applied before forming to form hydrophilic foil. Hydrophilic foil accounts for 50% of the total amount of air conditioning foil, and its use ratio will be further improved. There is also a hydrophobic foil, so that the fin surface has hydrophobic function, prevent condensation water adhesion. Because of the hydrophobic foil, the technology of improving surface defrosting needs to be studied further, and the actual production is very little.The thickness of the air conditioner foil is 0.1mm to 0.15mm. With the development of technology, air-conditioning foil has further thinning trend, Japan's leading product thickness of 0.09mm. In the thin state, aluminium foil to have excellent formability, microstructure and mechanical properties of metallurgical defects must be uniform, less small anisotropy, and high strength, good ductility, uniform thickness, good flatness. Air conditioning foil specifications and alloy is relatively single, suitable for mass production, but its market season is strong, for air-conditioning foil professional manufacturers, it is difficult to solve the peak season demand and off-season demand almost no contradiction.Due to strong market demand, in recent years, China's air-conditioning foil production capacity and technology level unceasing enhancement, has formed a large and small, high and low production of air foil enterprise group, some large enterprises such as China aluminum, Bohai aluminum products quality has reached the international advanced level. Because of the excessive domestic production capacity, the market competition is extremely fierce.
Q:What color coated aluminum coil is?
Fluorocarbon coating aluminum volume It is fluorine eneyne basic monomer is a fluorocarbon resin, pigments, ester solvents, additives, mixed together. After the film formation temperature barbecue, Coating the molecular structure closely with superior weather resistance.
Q:Is the aluminum foil tape radiation proof?
All I know is that copper foil can protect against radiation. Aluminum foil hasn't heard.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range