Hot sell Cold-rolled Steel security exterior door CS-009
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 20000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
1 | Material | Cold-rolled steel sheet. |
2 | Thickness of steel sheet | Door leaf: 0.3/0.4/0.5/ 0.6/ 0.7/ 0.8/1.0 mm; Door frame: 0.7/0.8/0.9/1.0/ 1.2/ 1.4/ 1.5/ 2.0 mm. |
3 | Standard size(H*W) | 2050*860/960mm (other size available, such as: 1970/2030*800/900/1000) |
4 | Door leaf thickness | 50/ 70/ 90 mm (other size available) |
5 | Final surface | Heat transfer print or spray powder. |
6 | Infilling material | Honeycomb paper or rock wool. |
7 | Opening direction | Left /Right inward; Left /Right outward. |
8 | Color | Red, Brown, Black walnut, Cream, Catalpa, Teak, and so on. |
9 | Lock | Machinery lock with 5 main lock points, 8 side lock points, 4 upper and down lock points |
10 | Handle | Movable both inside and outside; Various styles available. |
11 | Doorsill | Stainless steel or painted. |
12 | Hinge | 90° invisible or 180 ° visible reinforced hinge. |
13 | Other Accessories | Peephole, Installing bolts, Rubber seal, Doorbell. |
Conveyance (1x40'HQ):
H*W*T | 50mm | 70mm | 90mm |
2050x860mm | 392 sets | 310 sets | 220 sets |
2050x960mm | 362 sets | 290 sets | 205 sets |
- Q:Is the original wooden door a piece of wood made of a piece of wood?
- Brother, the door made such a case, no problem is impossible, how much can the tree to make a door? In general, as long as the logs, not a composite plate, and to ensure that with a wood, it can be regarded as the original wooden door. As for the processing technology, I think the need to give manufacturers greater freedom, as long as he told the truth on the line
- Q:I recently had a friend home decoration asked me where to buy wooden doors and solid wood stairs is good, is the solid wood door is good or good wooden door? We give advice Oh! "
- From the environmental aspects, the original wooden door is better. Solid wood doors are stitched with solid wood, stitching you understand. But from the practical point of view, solid wood doors are better, easy to deformation of the wooden doors. As for the brand, you can go online to search. hope this helps.
- Q:Because I was renting the house, but the bedroom door was hit by me, buy a new companion and do not come. So want to repair a repair! Please understand the experience of the prawns to help help find a way! The I checked the website. There are said to use latex, there is said with the assembly of plastic. The The door is open every day. Can the glue be able to withstand the pull of the door? The If there is a good way with the simple. Will you shrimp weapon ah. The The Thank you. The Question added: what glue can withstand the pull. How much can withstand It is best not to patch. Patch is too big, the landlord can not want more
- Buy some white latex to fill the next. And then to buy triangular iron staples to four positive and negative are nailed. Not enough to add a few more. Can only be the next brother carefully, nail finished I suggest you hurry to leave here to find another house to live it. Ha ha
- Q:Home to do wood processing and doors, and now the university to choose what professional good?
- You can choose the interior design profession, the future development prospects are good
- Q:How to deal with the shrinkage of the original wooden door
- Solution 1 First of all to be clear, shrinkage and cracking is different. Shrinkage is the thermal expansion and contraction of the physical properties of wood, mainly in the door to help the door between the core board, with the Department of the expansion joints caused by the expansion of the door core plate to open the paint exposed white; cracking is due to high moisture content, Poor process caused by, is a quality problem. The natural properties of the logs determine its variability, made after the product, a certain degree of contraction is inevitable, as if the bridge, the road should be left with the same shrinkage, the higher the water content of the greater shrinkage, the general wooden structure Basically can not solve the problem. Wooden door for the characteristics of these logs, the source control and process control to grasp the way to solve: 2 source control: wooden doors on the one hand selection of stable performance of imported timber, the use of raw materials are first through the international advanced steam drying, stereotypes technology, And then the second drying treatment, the wood moisture content control between 8% -12%, and then according to the product used in the classification of the region. General hardwood tree drying cycle should be about 25 days, some drying cycle and even up to 40 days -50 days. 3 process control: by improving the production process, the original anti-shrinkage anti-cracking treatment technology, the first to do after the paint assembly, set the shrinkage joints, with the joints to strengthen the strength of taps and so on, and truly anti-shrink, anti-cracking, Solid wood door contraction cracking problems.
- Q:I would like to ask myself to call the furniture factory to do the original wooden door? Also listen to others that the original wooden door will be deformed, right?
- Wooden doors are generally not deformed, the quality is very important, the original wooden doors look good!
- Q:Bungalow is a wooden door and window, would like to change the aluminum alloy, but inside the decoration of the mouth can also change it?
- To change the aluminum doors and windows to be re-do window sets.
- Q:Can I put a wallpaper or a crystal plate on a wooden door?
- OK. My house is a wooden door, posted on the wallpaper, but the wallpaper is custom. Waterproof and moisture.
- Q:Mr. Feng Shui: my family in rural areas, and now build a house with wood to do the door, see the light width of 1.2 meters the size of it?
- 1.19 meters is auspicious number
- Q:Why do you want to add money to the original wooden door?
- Is it clear that the white wood is open? Question added: the need is the logs, not solid wood nor you can go to TATA doors to see their solid wood composite doors, I feel better than solid wood. So good quality and
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Hot sell Cold-rolled Steel security exterior door CS-009
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 20000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords