PVC ceiling and wall panels:
2,Delivery time: 15 days.
Decorative PVC Wall and Ceiling Panels are an ideal choice for Bathrooms, Showers, Wet Rooms,
Food Preparation areas, to name but a few. They are waterproof, easy to clean, easy and quick to install
and cost effective.
1.Light in weight & easy installation;
2.Do not requie any polishing and painting;
3.Available in various shades;
4.waterproof, resistant to warping & cracking;
Main Product Features:
The hottest specifications of PVC panels on the market:
PVC percentage: 40%-60%
best pvc panel and ceiling (nice design)
PVC resin and calcium carbonate
Ojin PVC ceiling/wall panel /OEM
Normally printing, thermal transfer printing,
normally glossy, high glossy
1) The variety of colors and patterns
2) High intensity, resist erosion, anti aging
3) Fireproof, waterproof, rustproof, dampproof, heatproof,
4) Light in weight, easy setting and cleaning
40%, 45%, 50%, 60% etc.
Marble, wooden, 2000 article designs.
hotels, commercial buildings, hospitals, schools,
cooking rooms, washing rooms and etc indoor decoration
Heating Rate %
No bubble, craze or spot
Resistance of acetone
Dart drop impact
0.25kg/0.5m,10 times, Pass when keep unbroken above 6 times
Size Variation in High/Low Temperature
no visible cracks
- Q:Snow board is not pvc board, how the difference ah?
- Pvc board and Chevrolet board is not the same thing.
Pvc plate polyvinyl chloride (PVC) plastic is a vinyl chloride monomer by free radical polymerization of the polymer, the English name polyviny chloride, referred to as PVC. PVC can be divided into soft PVC and hard PVC. Which accounted for about 2/3 of the hard PVC market, soft PVC accounted for 1/3
- Q:Pvc floor can be laid directly on the marble floor tiles
- There is no problem, should be a certain thickness of PVC board and flexibility, 2 mm will not affect the quality of PVC board installation.
- Q:Pvc floor and floor leather is the same?
- Pvc floor and floor leather is not the same material, is not the same.
"PVC floor" refers to the use of PVC material produced by the floor. Specifically, polyvinyl chloride and its copolymer resin as the main raw material, adding filler, plasticizer, stabilizer, coloring agent and other accessories, in the continuous sheet on the substrate, the coating process or by rolling, extrusion or extrusion Craft production.
Floor leather (not PVC plastic flooring), is a kind of floor materials, plastic products, is a modern living room decoration indispensable one of the ground material, the thickness of 1.5 mm or more, wear-resistant layer 0.1 or more, plastic floor leather is soft floor.
- Q:Wood-plastic board, PVC board, science and technology What is the difference between wood?
- Wood-plastic board is made of wood fiber mixed polymer plastic after extrusion molding, is an environmentally friendly material, its weather resistance is very good, generally used for outdoor decoration. Pvc board is made of pvc material of a material, it is light weight, have a certain strength, but the weather resistance of acid and alkali difference for product packaging and interior decoration. Science and technology wood is made of artificial veneer made of decorative panels, generally with no color, pattern and other natural decorative panels can not achieve the decorative effect, but its pattern rigid, color frivolous no less than the natural decorative panel texture and decorative grade.
- Q:Pvc board and snowboard is a thing?
- Pvc board and Chevrolet board is not the same thing.
【Pvc plate】 polyvinyl chloride (PVC) plastic is a vinyl chloride monomer by free radical polymerization of the polymer, the English name polyviny chloride, referred to as PVC. PVC can be divided into soft PVC and hard PVC. Which accounted for about 2/3 of the hard PVC market, soft PVC accounted for 1/3
Furong board is a new type of chemical materials, polyethylene is the main raw material, add a variety of additives, the chemical bridge from the foam.
【Fulong board】 mainly by the Furong board single-sided composite 2MM made of hard PVC board.
The plate on the market due to two kinds of materials are common with the same material and chaos called.
- Q:Pvc board above can stick wallpaper?
- It is best not to paste, is barely able to paste will soon fall off, you can hang gypsum board top paste
- Q:Pvc plastic plate afraid of the sun?
- PVC ceiling generally add 200 copies of calcium, plus they do not profit, buy back the kind of film with the next.
- Q:Is the polyethylene plate pvc board?
- Polyethylene sheet is not PVC board.
Polyethylene board, also known as low-pressure high-density polyethylene, HDPE board, PE board, HDPE rod. Is a high degree of crystallinity, non-polar thermoplastic resin. The appearance of the original HDPE was milky white, in a slight cross-section was a certain degree of translucent.
Polyethylene sheet (HDPE board) melting point of about 130 ℃, the relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has a high rigidity and toughness, good mechanical strength. Dielectric properties, resistance to environmental stress cracking is also better. Melting temperature of 220 ~ 260C. For larger materials, the proposed melting temperature range between 200 ~ 250C.
PVC board is PVC as raw material made of cross-section for the honeycomb mesh structure of the plate. Is a vacuum plastic film, used for all kinds of panel surface packaging, it is also known as decorative film, with film, used in building materials, packaging, medicine and many other industries.
PVC board in the building materials industry accounted for the largest proportion of 60%, followed by the packaging industry, there are several other small-scale application of the industry. According to the degree of soft and hard can be divided into soft PVC and hard PVC. According to the production process can be divided into PVC crust foam board and PVC free foam board.
- Q:Can i put a power cable and an ethernet cable in a pvc pipe together?
- Yes you can put them together and no you will not receive interference
- Q:PVC board and EVA board What is the difference, which is good flexibility
- PVC is a polymer that uses a chlorine atom to replace one of the hydrogen atoms in polyethylene.
PVC is the most important feature of flame retardant, it is widely used in fire protection applications. But PVC in the combustion process will release hydrochloric acid and other toxic gases.
EVA: ethylene-vinyl acetate copolymer is low foaming polyethylene foam plastic. Is a new type of environmentally friendly plastic packaging materials, with good cushioning, seismic, heat insulation, moisture, chemical corrosion, etc., with non-toxic, non-absorbent. Has a good anti-vibration: resilience and high tension, high toughness, With good shock / cushioning performance
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range