Hot! High Quality Engineered WPC Composite Decking

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
300 g/m²
Supply Capability:
10000 g/m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1> What is WPC?


WPC, simply for wood plastic composite.

Wood Plastic Composite is made from a unique combination of plant fiber and recycled plastic

according to high-tech formula.

It offers the best advantages of plastic and wood. The plastic shields the wood from moisture and

insect damage, and the wood protects the plastic from UV damage and gives you a natural feel.

It has characteristics of high strength and rigidity, acid and alkali resistance, corrosion resistant

and without formaldehyde, it is a real green environment protection building material.


2> What’s WPC used for?


WPC can be used for military equipment, urban utilities and landscaping, architecture,

gymnasiums, outdoor decking, fencing, pallets, indoor and outdoor decoration.









3> Why choose WPC decking?

 *Natural colour 
 *Slip resistant 
 *Resistance to water, rot and crack 
 *Guaranteed to last 
 *Low maintenance 
 *Beautiful and broad range of finish


4> What are the main kinds of WPC currently?

 *WPC decking board 
 *DIY decking board 
 *WPC wall panel (wall cladding) 
 *Garden fence (railing) 
 *WPC outdoor furniture (gazebo, pavilion, outdoor desk&chair, dustbin, pet house…)

5> Ingredients of WPC?


30% HDPE+60% bamboo/wood fiber+10% Chemical additives.


6> How’s WPC made?

 Hot! High Quality Engineered WPC Composite Decking

7> Specification of WPC?


A. Weatherability 
suitable from -40° C to +60° C, UV resistance 


B. Test Data

Testing Item Technical RequirementsValue of Test
Water Content % ≤2  0.4

Rockwell Hardness (HRR)


Thickness Swelling after

Water Absorption (%)

≤1 0.2 

Screw Holding 
Capability (N)

Surface of board ≥13003870 

End of board ≥12003460

Static Bending 


Bending Elastic 




Hammer falling impact in low

temperature, broken (pcs)


State after Heating

No babbles, cracks and pockmarks


Rate of Size Change with Heating (%)


Report Number: 201107126 
Type of sample: 90x25x820mm, Solid 


C. Surface treatment

Hot! High Quality Engineered WPC Composite Decking

D. Main colors available:

landscape use wpc CMAX H150H25C

charcoal-black; classic-white; rinforest-canopy;sand-castle; stepping-stone; tree-house; vintage-lantern .


E. How to install


 Hot! High Quality Engineered WPC Composite Decking



Company Information



8> About CNBM and It’s WPC products


China National Building Material Corporation (CNBM), long history since 1984 is one of the top 
fortune 500 corporation and central enterprise with total assets of more than $20 billion and 
120,000 staff. 

Our unique advantages: 

* Preferential payment terms 
* Good and reasonable price 
* Quality guarantee -- CNBM won't let a single small deal ruin our reputation and brand, so quality is

our lifetime. 
* Professional team for CRM order processing & QA & logistics 
*Global logistic database, originated from Dubai

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Vacuum Cleaner for Laminate Flooring.?
No upright vac using a rotating brush should be used on laminate flooring. You should check out a small, vacuum only, tank model that will come with a hose and floor brush with bristles to pick up the dirt. Try to find one with horsehair bristles on the floor brush, they last longer and won't ever scratch anything. Eureka makes several models as well as Hoover, in the avg. priced market. Filter Queen and Electrolux make better quality models in the higher price range.
Q:what is a floating floor?
Hardwood flooring snaps together and isn't nailed down, so it just floats. The wood floors must float so they can expand and contract with changes in temperature and humidity.
Q:Unlevel Kitchen Floor?
First of all you didn't mention if you are removing the existing kitchen cabinets and replacing them? If you are, I would level the area that will be under your new kitchen base cabinets only. This will insure your new kitchen cabinets are nice and level. Build bases and a plywood platform that is level for the new base cabinets. If you are not replacing the cabinets, I don't know if I would go to the trouble of leveling the floor, and if i did I definetly would not use a self leveling compound, of any kind. That old subfloor is going to move still, and eventually that self leveling compound is going to flex,crack,and disintegrate. Remember some things will be affected by an inch increase in the floor level. If you have a dishwasher and you level the floor you may not be able to get dishwasher up and out from its position should it need replaced. And if you pull it out to put new floor down - you may not have enough room to slide it back in and fit under the counter top. Your refrig will be up higher also - What about doors? If you have an inswing exterior door it may hit your raised floor? If you insist on leveling the floor- I would hire a good carpenter and do the job by scribing wood pcs. to fit contours of old floor placing them on 12 centers screwed and glued down into the old floor. * tighten up any loose areas on old floor first* Allow enough room on scribed pcs. to install at least 1/2 thick underlayment, and your finished flooring. Remember - old houses can't be expected to be new - some of the characteristics of an old house are- squeaky uneven floors,walls,ceilings.
Q:concrete my living room floor?
Any large slab of concrete is subject to cracking. It doesn't matter what you do, it can happen. You can use steel reinforcing, pour it very dry, pour it in sections, etc. to try to minimize the chance of cracks but there will always be a risk that they will show up. Even if you scribe in joint lines to try to control where the cracks are, they may show up somewhere else. I would look for another alternative.
Q:house to sell... flooring ?
An open floor plan would look ridiculous with different types of flooring. It would look like the jobs was done in different phases. A continuous look streamlines the area and also makes it look larger and more cohesive.
Q:floor polishing or stripping?
The process of stripping a floor is to remove all the build up wax that accumulates in time . Polishing is to shine the wax that you apply to it , you can polish with a floor polisher every day if you wish to take scuff marks off and dust at the same time . I have always used paste wax when I polished my floors and stripped them down with Varsol You can purchase a floor polisher that serves dual purpouse ,it comes with felt pads for polishing and scrubby pads for stripping. You can also rent a machine for this type of job Home Depot rents them out.
Q:Dark floor and doors with what color of furniture, curtains with?
Can be compared with the dark blue penetration of high linen with exquisite lace lace curtains, in this case the color of the furniture can be a variety of, or deep or shallow, there will be a different effect. Although the color of the flax is dark blue but because of the relatively light can be used two layers of curtains, increased the curtain of the elegant Smart feeling, to achieve both the landscaping and create a private space to create the function. For information on curtains please check my space.
Q:Floor molding falling out in mobile home?
You could have a leaking pipe underneath the trailer where the moisture is, or if it's near a wall the water could be coming down inside the wall from a leak at the edge of your roof or a pipe inside the wall. The only way to stop it is to find out where it's coming from.
Q:Does the humidifier hurt the wood floor?
It should not be it.
Q:unlevel floors?
There could be structural or foundation damage. Or it could be the house settling unevenly. It depends on what you mean by unlevel. Are the floors perfectly straight just tilting off to a side. Or are the floors warped, bowed? Or are there lips and noticable bumps? If you are looking at a house to buy, you might want to pass or have an expert look at it. If you own the house and want to repair, you will probably want someone skilled to look at it.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range