Q:Will the living room door frame beams be fitted with corners?

Yes. Corners and seams to deal with, otherwise it will be obvious, will not look good.

Q:A good way to protect the corners of the horns

Corner corner according to the use of the location is divided into: angle angle angle (angle installed in the protruding corner, mostly large hole section of the angle of more than 90 degrees), corners of the corners (corners installed in the concave The corner of the corner, the majority of small round hole, section angle of more than 90 degrees.), Can be bent corner, T-type angle; angle can also be divided into: insulation angle and decoration corner, Winged corners of the mesh material is attached to the metal or PVC profiles on both sides of the role, play a role in the stucco, wingless corners is in the metal or PVC guide profile drilling, so that the corners directly embedded Stucco.

Q:Why do the construction before the plaster angle

Now most of the construction staff, not according to the requirements of construction, the use of primer, plaster, reduced leveling this process, so plaster quality greatly reduced. If you are a manager, it is recommended by the construction requirements to do, because the construction fee is divided into three layers of plastering. That has been paid to leveling the process of money.

Q:There is one of the renovation budget: the corner of the wall angle, Lafarge metal corner, the main price of 110, artificial unit price 80. According to 2 volumes to count, calculate the 380 dollars. What is this stuff?

Corner is a kind of use in the wall, so that the corner is more clean and beautiful appearance of a profile, in addition to beautiful, the corner of the corner at the same time strengthen the corner, to avoid the corner of the dents and other damage.

Q:Cement mortar room Corner when no design requirements, the height should not be less than the number of meters?

Not less than 2M, width 5CM.

Q:Please say their respective advantages and disadvantages, thank you!

Chamfer posted out of the wall tiles, the overall sense of better, more coordinated. So it is recommended to use chamfering.

Q:Yang angle of the corner should be done more than meters

From the ground not less than 2m.

Q:Neutral silicone weathering adhesive can stick angle?

Look at the mirror paste the wall material, paint the wall can not cover, tile or concrete wall silicone rubber can be, I was using silicone rubber vulgar paste, has been ten years intact. Note that the double-sided adhesive film can not be left, or the use of double-sided adhesive paste, or scraping double-sided adhesive, because the double-sided adhesive and glass glue is not necessarily combined.

Q:What is the size of the guard angle bars?

The market commonly used soft horns are 50 * 50 * 6.5,42 * 42 * 3.6,30 * 30 * 4,25 * 25 * 2.5, hard corner, 20 * 20 * 1.5,25 * 25 * 1.5,36 * 36 * 2,40 * 40 * 2, this is the current market with more specifications!

Q:What is the staircase angle?

In the stairs of the corner embedded in a length and step equal to the copper or steel bars, in order to improve the anti-wear at the corner of the anti-wear and anti-bump ability, called the staircase angle steel.