High Temperature Refractory Cylindrical Alumina Smelting Crucible

Ref Price:
Loading Port:
China Main Port
Payment Terms:
Min Order Qty:
Supply Capability:

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


alumina crucible:
1.high purity Al2O3 >99%.
2.Superior refractoriness.
3.High mechanical strength.
4.Long life time

Product Description

alumina crucible:

1.high purity Al2O3 >99%.

2.Superior refractoriness.

3.High mechanical strength.

4.Long life time.

Feature of the alumina ceramic crucible:

1. High chemical etching resistance.

2. High temperature up to 1800°C  

3. Resistant to sudden cold and hot, un-explosive.  

4. High density of slip casting.

5. Various kinds of shape.

99.5% Alumina Ceramic crucibleIndustrial alumina ceramic crucible is used for testing laboratory and a variety of industrial analysis. Alumina ceramic crucible

include: arc alumina crucible, square alumina crucible, rectangle alumina ceramic crucible, column ceramic crucible and a

variety of shaped alumina ceramic crucible.

Physical Character of the alumina ceramic crucible:

Item                                                                           Unit                          99 Al2O3            
Physical Characteristics       Heat resistance0C1800
Bulk density                             g/cm33.9
Water absorption                   %0
Flexural strength                     Mpa360
Mechanical Characteristics         Hardness vickers                   Gpa15.6
Elastic modulus                         Gpa370
Poisson’s ratio                           -0.23
Thermal Characteristics       Linear expansion coefficient                         (200C-5000C) 10-6/0C8
Thermal conductivity               w/(m.k)32
Specific Heat                           *10-3J/(kg*K)0.9
Electrical Characteristics     Dielectric constant (1MHZ)       -9.9
Dielectric loss angle                  *10-41




Packaging & Shipping

Packaging of alumina crucible: PE bag inside outer carton

(930*630*230mm),finally make the wooden pallet(950*950mm 950*1000mm) or according to your requirement

Shipping of alumina crucible : delivery within 15 days after confirm the order.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:which kind of refractory is used in golden smelting furnace? How about his using temperature
generally the price of the quartz sand refractory material is higher and the temperature can meet the requirement of 2000 degree.
Q:What are the differences of ceramics and refractories? Is the ceramics belonging to refractories?
Ceramic pottery ceramic collectively known species of high water absorption and low-grade sinter clay brick, tile-like material; high stone kinds of porcelain clay plus clay and other raw sintered body strength, low water absorption bowls, plates and other kinds of refractory high temperature structural materials are all non-machine ceramic refractory metal material belonging to a broader definition of ceramic refractory ceramic can be attributed to the high temperature ceramic refractory.
Q:What is the biggest difference between refractory bricks and clay refractory bricks? Where can I find information on the refractory bricks?
You can look up knowledge manual of refractory material to find phosphatic material, etc. Xinjiang refractory bricks, castable refractory, refractory material, silicious, corundum and alumina-magnesia: High alumina and clay refractory bricks can be divided into
Q:What is glass furnace used high-grade refractory materials?
It is said that building a furnace need 30 million? After the ignition, it can't be gone out. Only at the waste to maintenance?
Q:Does anyone know fire-proof material of fireproof wooden door?
Because the timber of fireproof wooden door has gone through fire retardant treatment, so it can prevent fire. Its principle: Fire-retardant treated timber has become flame retardant material itself and its fire endurance has increased. The commonly used method of fire retardant treatment for timber including: Spraying method, soaking method, boiling method, vacuum method, vacuum-pressure method. Spraying method and soaking method are generally used for timber surfaces which are no longer going through planing process, and thin plate fire retardant treatment, whose thickness is less than 10mm . Vacuum method and vacuum-pressure method have excellent flame retardant efficiency, but their equipment are expensive. Fireproof wooden door refers to the door whose fire endurance of door frames, skeleton of the door leaf, door panels made of timber or timber work reaches the provisions of "GB50045-95 design of tall buildings for fire protection".
Q:Who knows about the grade C fireproof door materials?
Wood or steel materials are usually used in them. The new national standard fire doors: According to the enacted GB12955-2008, the fire endurance of grade C fire doors is 0.5 hours and that of grade A and B are 1.5 hours and 1.0 hours respectively.
Q:What refractories can withstand high temperature above 2100 degrees?
Well, what can you heat to 2100 degrees? ? The dryer? What you used are all substance of low-melting point, which cannot withstand even 1000 degrees. "Is the maximum temperature of refractory bricks 1500 degrees?" Do you mean refractoriness or operating temperature? Firstly, a dryer is impossible to reach 2100 degree. If it does, you might as well use high chrome brick for oxidizing atmosphere. You can use silicon nitride brick for non-oxidizing atmosphere. But I guess it is enough for you to use clay brick, but the price differs a lot! ! !
Q:What parts of cement kilns are refractories used on?
These parts are decomposition furnace, smoke chamber, kiln, kiln hood, grate cooler, tertiary air duct and coal pipe.
Q:What are the materials of class A fire resistant window?
The filling materials of steel, wood frame should be non-combustible materials. Fireproof glass can use qualified products that do not affect the fire window fire resistance performance, whose light transmittance should be no less than 75% that of the commom sheet glass with the same layers. Sealing materials between the frame and fireproof glass should be nonflammable materials. Hardware fittings should be fixed supporting products that pass the test.
Q:What are the specific steps of stirring the steel ladle castable?
Steps are as follows. 1 Compulsory mixer is used to stir the castable and bags, rope and other debris can not mix in the castable when stirred. 2, Castable should be unpacked on the scene. Stirred volume depends on the capacity of the mixer. Castable should be accurately measured and put into a blender. 3 The process of first dry mixing and then wet mixing is adopted. After the castable is added to the mixer, it is dryly mixed for 2 minutes, add about 5.2 to 5.5 percent of water and continue to add water while stirring. Water that is 80% of the total should be added, and then decide whether to continue to add or not depending on the consistence (noting that the water must be clean water and sewage can not be used). Then it is wetly mixed for 4 minutes and stirred for not less than 6 minutes at one time, until castable is even. In general, the bottom is slightly dry and the wall of the ladle is slightly dilute (the amount of water is only for reference). 4, The amount of water and mixing time should be controlled strictly when stirred to ensure that the needs of the consistency are met. If castable is too thin, it will seriously affect the quality of the material. The stirred volume, stirring time and water that is added should be consistent and they can not suddenly be thick or suddenly be thin. If the consistency does not meet the requirements, the castable should be put back to the mixer and stirred with appropriate water or dry materials. 5, It should be stirred evenly and casting should finish in 20 minutes, in order to avoid sclerosis, affecting structural strength of ladle lining 6, After each completion of construction, varieties of castable should be changed and the mixer should be cleaned 7, Stirring can stop in halfway. If the mixer breaks down and it can be repaired in a short time, some of the materials have to be removed before the machine is opened. If the machine can be repaired on time, castable refractory should all be removed.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range