Introduction of High Quality Spring Press:
Portable coaxial spray gun is the best choice for GRC products spraying by hand; It has a distinguished setting: it combines glassfiber cutting, mixing with other stuff such as mortar into identical spray nozzle, make sure the proportion of each different material, achieving the strength standard what GRC products require;
Technical Data Sheet of High Quality Spring Press:
Air-operated motor pressure: 0.35-0.45Mpa
Mortar pressure: 0.25-0.35Mpa
Fiber pressure: 0.20-0.30Mpa
Max rotate speed of air-operated motor:2500r/min
Granule Diameter: < ¢2mm
Fiber length: 30 -60mm
- Q:GRC light partition board installation scheme for construction of hydropower pipelines
- GRC lightweight partition board is a new type of wall material developed in recent years. It can eliminate longitudinal cracks as long as it is built according to the order of requirement and new technology of interlocking joint is applied. Therefore, GRC lightweight partition board is one of the ideal materials for building energy conservation and wall reform, and has been widely used in engineering.
- Q:What is the working principle of the mortar pump?
- Because of its simple structure, low cost and low price, the mechanical cam type mortar pump has been widely used in the situation where the requirement is not high. Hydraulic drive mortar pump due to the use of hydraulic cylinder drive, the transmission piston stroke can be done relatively long, reversing frequency reduction, so its suction efficiency is higher than the mechanical cam, generally can reach about 80%. Due to the use of hydraulic cylinder drive, the pressure of the delivery cylinder is also easy to improve, and its outlet pressure can be done relatively high.
- Q:What are the features and capabilities of GRC components?
- From the material composition, the thermal conductivity is less than the general organic polymer inorganic non-metallic materials; thermal conductivity is smaller than that of the metal material; thermal conductivity of gaseous substances less than liquid substance, liquid solid material is less than. Therefore, the organic polymer material or amorphous inorganic material should be used as far as conditions permit, which is beneficial to thermal insulation. From the point of view of the material structure, when the apparent density of the material decreases, the porosity increases, and the pore inside the material is a large number of enclosed micro holes, the thermal conductivity of the material is relatively small. For foam plastics, the best apparent density is 16~40kg/m3 to meet the requirements of thermal insulation materials. Due to the existence of pores in the material in a humid environment, will inevitably be water, water and thermal conductivity (0.5815W/m - K) than ofstandstill air (0.0233W/m - K) is much larger, therefore, when the humidity increases, the equilibrium moisture content of materials increased, the thermal conductivity of materials will decrease. Therefore, as a thermal insulation material, the moisture absorption rate of the material itself should be as low as possible. If it is unavoidable, the material should be treated with water repellent or coated with waterproof material.
- Q:What's the difference between partitions?
- There are many types of partition board, such as partition board raw material is not the same, the product is not the same, such as composite fiber, cement, foam, ceramsite and so on.There are many types of partition board products, such as interior wall panels, exterior wall panels, their length, thickness requirements are not the same.
- Q:What is the standard value of GRC durability?
- GRC is the abbreviation of English Glass fiber Reinforced Concrete, and the Chinese name is glass fiber reinforced cement. GRC is a kind of fiber cement composite material with alkali resisting glass fiber as reinforcing material and cement mortar as base material. GRC is a kind of material that expresses designer's imagination through shape, texture, texture and color
- Q:What about the air leak in the flue?
- When you want to see what kind of flue air leakage, the division of the usual general exhaust flue or kitchen flue, if the kitchen smoke exhaust, air leakage will be repaired immediately. To make, it is not can replace the exhaust pipe.
- Q:GRC composite column, which is better?
- This is the performance of the GRC minimum guarantee project, not buried steel or cold wire drawing with pre inside, a few years will rust off, because the GRC thin wall, the protective layer is not enough, you should understand the serious consequences, you should also want to get it, the embedded metal should not be called GRC, GRC glass fiber reinforced cement component referred to, the use of metal is a short-term enhancement.
- Q:GRC jet equipment prices?
- We offer a full set of GRC injection equipment at 16800 yuan
- Q:GRC cement products have cracks, what are the reasons?
- There are many reasons for cracks in GRC cement products, such as thermal expansion, cold contraction, or, in other words, the disadvantages of GRC components.
- Q:(GRC) substitute material for plates
- GRC component is a new type of exterior wall decoration material. It has glass fiber. It has the advantages of safety, hardness, alkali resistance and corrosion resistance. Why should we instead of material instead?.
ARTFUL, a well-known enterprise which is engaged in the research, development, design, production and sales of high-quality, high-grade GRC decorative, gardening, art sculptures.
Our products include: flower pots, fountains, gazebos, relief paintings, murals, picture frames, stylobate, furniture, fireplace, Roman, corbels, window cover, door pockets, line, figure sculpture statue etc.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 10 Million
||20.00% North America
20.00% South America
10.00% Eastern Europe
10.00% Southeast Asia
10.00% Northern Europe
10.00% South Asia
10.00% Western Europe
5.00% Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||Above 26,000 square meters
|No. of Production Lines
||Design Service Offered;
Buyer Label Offered
|Product Price Range