High Quality PVC Facing Gypsum Ceiling Tiles

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Features:


1. High Quality : our products are 100% handmade. thickness tolerance is less than 0.1 to 0.5 mm.

2. Multicolor: A piece of the ceiling can paint five colors. our products can painted about 200 kinds of colors.

3. Sound Attenuation: sound attenuation is 32dB.it is able to lower noise inside.

4. Moisture-proof: It can be very good control indoor air humidity adjust the indoor humidity and increase comfort.

5. Long Service Life: We put the glass fiber inside.It can make gypsum ceiling deformation, high strength, wear resistance.

6. Varied Choices:  The sizes can be changed from 600 *  600mm, 595 * 595mm to 603 * 603mm. We have different thickness for 9 to12mm. Its colour is white & colorful or according to the customer's requirements.

7. Excellent In Appearance : combined with many fashion colors ,making good tmosphere, natural, harmonious,luxury,or high artistic effect.

8. Sell Well: Our factory is a manufacturer of building materials with a history of more than ten years. Our products Sell well both at home and abroad.

9. Widely Use: It can be used for partitions, interior walls, pipeline and conduit compartments, stair space, exterior walls, ceiling boards and pillar wrapping.  


TECHNICAL DATA


CommodityTerasun Silicate Magnesium Board---TSM
Raw MaterialFoam particles, cement, plant fiber, glass fiber cloth, non-woven fabrics, etc
Density≤ 0.95  g/cm³
Size1220*2440mm or 1200*2400mm Customerization is available
Thickness6~20mm
Moisture Content≤ 12%
Fire Rating TestClass A1 incombustible material
Moisture Movement≤0.12%
Bending Strength≥  8 Mpa
Maximum Service Temperature1200  °C
Water Permeability No water vapor after 24 hours' test
Specific Heat 0.209
Linear Coefficient of Thermal Expansion 20~750 °C 138
Permanent Linear Shrinkage≤ 0.4%
Refractoriness 4H
Coefficient of Thermal Conductivity  ≤0.29 W/MK
Loss in Ignition  (1025 °C)50%
ColorGrey
Features / MeritsWaterproof; fireproof; termite proof; light-wight; flexional; easily to be shaped, perforated, bended; long service life; environmental friendly, etc
ApplicationsInterior&exterior wall board; ceiling board; suspended ceiling; free access floor; desktop board; sandwich panel; kitchen and bath wall board; decoration, etc
Terasun gypsum ceiling decoration---TSM especially suits to grand exterior&interior wall, ceiling projects of office, conference room, hotel, hospital, plant, lab, commercial center hall, tunnel, subway, airport, warehouse, etc.




Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How should the ceiling be blended?
First, ask for upstairs compensation, which is for sure. You can make a price by someone else's price. As for whether to redo, I think no need, gypsum board is waterproof, after the re-brush it can be done
Q:Gypsum board ceiling how to install the grille lamp how fixed to the gypsum board
Is to add money. Construction difficulty increased. The general range of 30-50 yuan per lamp range. In the location of the tuyere and grille set the way, it is best to have the first size of the outlet and grille!
Q:Gypsum board ceiling to buy what basic common sense
Pick keel. Keel to see people or not on the master, according to the need to select specifications, election hardware components
Q:To prevent gypsum board ceiling split in addition to paste kraft paper and cloth what good way?
1, keel system check is good, large area should be arch. 10 meters long, from arch 1-2cm; 2, more than 10 meters long ceiling should be set expansion joints; 3, gypsum board fixed check again to see if there is no fixed fixed; 4, with gypsum-based powder approved in the gypsum board than with the old powder putty batch on the gypsum board sinking much less impact; 5, with high-quality gypsum board caulking paste to do the joint treatment, the proposed Lafarge, Pratt, Knauf, Long card and other brands.
Q:Gypsum board ceiling, need to use long self-tapping nail?
Monolithic gypsum board (9.5mm or 12mm) with 25mm anti-rust self-tapping screws can be; double gypsum board with 35mm anti-rust self-tapping screws can; other circumstances according to the scene to set.
Q:Gypsum sunny corner is how to get to the wall to go?
Check the installation conditions. On the installation environment, the installation of the carrier, such as the wall, to check, the environment has water or too wet, or institutional instability, vibration, can not be installed. The surface of the carrier is not smooth, need to use putty and the like finishing the whole product to ensure that the plaster line paste, the gap as much as possible, but the conditions, it is best to plaster line directly installed in the cement layer wall, The chance of falling off.
Q:Gypsum board ceiling seam how to deal with?
Sealant (Lafarge can be resistant and the like can be) with glue and mix well, pay attention to spatula to be flat. Check all the joints are filled and then dry and then generally deal with the next surface, Lafarge and the like brand bandage soaked in water after the white latex paste covered in the seams, must use the brand's good bandage, or rework Trouble to say. After drying can be done as a whole putty, and pay attention to the decoration company will ask the bandage on a re-sealant effect will be better.
Q:ceiling damp showing through gypsum - what is cause and how is it preventable?
i think its a moisture problem rather than leak probably where wall and ceiling meet you need ventilation attic vents do the trick also house may be sealed to good need a fresh air intake
Q:Will the decoration experts have a problem, the home inside the plaster ceiling lines need to brush latex paint?
need. Under normal circumstances, gypsum line paving by the tiles to complete. But after the tiles have finished, you will find that there is no end. For example, there will be a clear gap between the two plaster lines, or the gypsum line is not so beautiful. Need oil workers in the wall coating latex paint in the process of filling the gap, and brushing, will form you usually see the beautiful gypsum line.
Q:Gypsum board putty how long off the drum
First of all, we come to understand the reasons for the gypsum board ceiling cracking: 1. The cracked part does not belong to a cross or a seam before the gypsum board is constructed. Construction of gypsum board with the wrong stitching. If the crack site at the right angle of the transfer site, because the uneven stress caused by the consequences; the whole gypsum board at right angles to the joints, joints remain in the linear ceiling parts of the fall, this phenomenon is not handled properly grass, Brush interface agent, do grass-roots treatment. 2. Fixed the expansion of the expansion of the bolt bolt is not selected or hanging points and pendant nodes appear false force situation. There are technical hanging parts on the expansion of bolts and nuts and fixed in the hanging of the screw, nut kink, silk button damage. The lower part of the expansion screw is suspended and the nut is not fixed. 3. Gypsum board ceiling cracking may also be because the big crane and the main keel connection, due to large deformation or not supporting the main keel clip in the middle of the big crane, not in the bottom of the crane force. Or in the hanging with the main keel connection, under the hanging vice keel, and the main keel connection, resulting in the main and vice keel between the active gap. 4. There is a fixed gypsum board self-tapping screw spacing is too large or part of the self-tapping nail force, as well as the gypsum board ceiling in the temperature of the thermal expansion and contraction of the air, by wet up shrinkage, Sewing tape construction process problems will lead to gypsum board ceiling cracking.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range