Specifications of pvc commercial flooring
(3) UV coating
used for hospital,office,airport,commercial.
Many series of commercial flooring for almost every commercial areas, like office, hospital, school, transportation, and so on.
Varieties of choices, thickness from 2.0mm to 3.3mm, great cost performance.
(1)thickness:1.0mm to 5.0mm(wear layer:0.10 to 0.70mm)
(2)with UV coating (or without UV coating as your request)
(3)we can supply more than 30 kinds of design for your choice and different colours for each design.
(4)we can design a exclusive pattern as you request or you can use your own design.
pvc commercial flooring
Type of flooring
Dynamic coefficient of friction
Impact sound reduction
Up to 20m long
Thickness of wear layer
Electrical insulation group
Static electrical resistance
- Q:PVC floor, plastic floor, roll floor, floor leather, the difference between glue
- Coil flooring, floor leatherFloor leather (not PVC plastic floor), is a kind of paving materials, which belongs to the plastic products, is one of the indispensable modern home decoration materials on the ground, the thickness of 1.5 mm or more, the wear-resisting layer 0.1, plastic floor belongs to the soft floor.
- Q:The requirement of plastic floor paving to the base
- The tiles can be spread on the floor, but the high ground surface roughness is not high at the end of 2 mm, 2 mm high as bottom difference with plastic floor foaming, high bottom difference obviously uneven, finally to rework, also have an impact on the life of the plastic floor! I suggest you do the ground put plastic floor, the following is our factory production and supply of products! The first price, the second material, third material odor (smell the heavier the price cheaper), the quality of the fourth accessories, the price of fifth accessories, the construction materials of the sixth, the material life of the seventh, after service
- Q:EVA plastic floor and PVC plastic floor which is good
- EVA: is elastic, flexible, shiny, breathable and so on.
- Q:General thick wood floor? How long can the plastic skirting line be used on wooden floor?
- Just let him change it for you. The truth is the same, but the baseboard, do not have too much to worry about, plastic skirting is allowed gb.
- Q:Ask how to install plastic floor
- Tools: a knife blade, remove the plastic floor flat at room temperature for at least 24 hours, two on each side of the wall to find the center point, draw the cross center line on the floor, the ground is divided into four areas, and then from the central to the laying of three four, clean the ground, make sure the ground can begin after the laying of four, clean (without gum floor) with a scraper coated plastic tile special adhesive, five (Beijiao floor) tore the floor backing off the paper, starting from the six floor of the center line laying in all directions, each piece of tile must be close to the junction, glued to the ground, to avoid the gap seven, laying to the wall the floor tile cutting required size
- Q:The floor of the wooden floor is a good line of plastic or wood
- The appearance of high-grade wood, polymer should be waterproof anti-corrosion.If you can reduce the price of polymer can be considered.
- Q:What is the difference between hard and soft plastic floor construction
- If I tell you, will you kill me? Well, tell you, in fact, the difference is not big, not fire
- Q:How to spread the plastic floor?
- With multi-layer solid wood board paved on the floor tile on the line, it is worth noting that the plastic plate is flat buckle
- Q:What is the badminton sports floor?
- Badminton plastic floor:Badminton, table tennis, volleyball, basketball, multi-purpose venues, gym, dance room, school, unit activity room, kindergarten, playground, sports shops, offices, hotels, hospitals, factories and workshops of all sports and leisure places.
- Q:Solid wood flooring on the back of plastic paper, why
- Whether it is solid wood or composite flooring is now installed under the floor of the materials used are. Mat close to laying on the ground, a waterproof, moisture-proof, protect the floor, increase the elasticity of the film, the ideal thickness is more than 0.22mm, and has the properties of alkali resistant, acid resistant.
We are a high-tech enterprise integrated manufacturing, marketing and service of PVC flooring products. Established in 1992, with registered capital RMB 31,240,000. The main application area ranges in florring and wall decoration of transportation, medical, education, commercial, sports, industrial and residential area. The company have also exported to Europe, America, the Middle East, Russia, Japan and Korea.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 100 Million
||Middle East; China;
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||70% - 80%
|No.of Employees in Trade Department
||Above 45,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range