Q:Why hand grinding sand turbine, electric drill, impact drill and other power tools plug is two, plug is not three plug

In recent years, leakage protection performance and the reliability greatly, has become a standard power supply, reliability of human protection over ground protection to a certain extent, but the impact of grounding protection and leakage protection to human body protection, so many hand-held electric tools to cancel the earthing protection, relying instead on leakage protector. And use the two eye plug.Look at the instructions for the hand-held power tools with two plugs. All require that the power supply be equipped with an electric leakage protector.

Q:How to detect the rotor of power tools?

Rotor spark. 1) the carbon brush and commutator rotor, no free contact. 2) the connection spring on the carbon brush nest is burned, and the person who is burned is not able to connect normally. A vicious circle, sparks plus sparks. Machine failure will also occur.

Q:How are the I, II, and III classes of power tools classified?

The popular point is that:The 1 type of tool is metal housing with ground wire.The 2 type of tool is the insulated housing.The 3 type is low voltageOfficial point of explanation can be searched for power tool category ~!

Q:What other tools are there for the furniture except the pistol hole?

As we all know, a hand drill is an AC power supply or a DC battery powered drilling tool. It is a kind of hand held power tool.

Q:Which is good between pneumatic tools and power tools?

The use of pneumatic tools:1., the air is easy to obtain, and the work pressure is low, the used air can be discharged locally, without the need to recover the pipeline2. gas viscosity is small, flow resistance loss is small, easy to central gas supply and long-distance transportation3. pneumatic actuator, high movement speed4. the pneumatic system has a strong adaptability to the environment. It can work reliably in a wide temperature range, humid and dusty environment, with a slight leakage, no pollution to the environment, no fire and explosion hazards, and safe use5., simple structure, convenient maintenance and low cost6. long life of pneumatic components7. pneumatic actuators of the hydraulic output than small, fast, strong adaptability, can exercise in the flammable, explosive, heavy, damp, the impact of the harsh environment, no environmental pollution, long service life, simple structure, easy maintenance, low price.

Q:Compared to pneumatic tools, what are the advantages of electric tools?

The pneumatic tool is more environment-friendly, energy-saving, and has better environmental adaptability, and is safer than an electric tool. The pneumatic tool has the advantages of simple structure, convenient operation, long service life and convenient maintenance

Q:What are the commonly used rotor types for power tools?

Electric tools commonly used bearing type: 606, 607, 608, 626, 627, 628, 629, 6000, 6001, 6003, 6004, 6200, 6201, 6202, 6203, 6303, 61907, 688 commonly used carbon brush models: 50#, 408#, 43#, 44#, 303#, 21#, 6M etc.

Q:What safety problems should we pay attention to when using electric drills or hand-held power tools?

All of the wires must be more tough and durable rubber covered wire. When the wire enters the shell of the motor, the rubber ring is used to protect the insulation layer of the wire from being worn out.

Q:Is the motor of an electric tool the alternating current motor or the direct current motor?

The series motor is usually used. The series motor is connected in series because the stator and rotor windings are connected together, so when the current is reversed, the magnetic field is reversed, so the torque direction remains the same. However, according to this principle, the motor works at 180 degrees after the torque is gone, so even the AC motor, but also need to reverse, in order to work like a DC motor.The rectifier also needs to be rectified if it is operated under the direct current. The rectifier bridge is very small. On the circuit board, there are four diodes close together, mostly rectifier bridge

Q:Is BOSCH's power tools good or MAKITA's power tools?

BOSCH electric tools three characteristics:1. 、 light structure, easy to carry and use.2. more than manual tools can increase labor productivity several times to several times;3., the utility model has the advantages of high efficiency, low cost, small vibration and easy control.