High Quality DJ801 Butyl Sealant for Insulating Glass Primary Seal
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description
Solvent-free, one-component primary sealant.
1. Fog-free, unsulfurized, permanent plastic primary sealant based on polyisobutyl for insulating glass.
2. With very low water vapour and gas permeability for interior sealing of insulating glass units.
3. It has good adhesion to glass, aluminum alloy and galvanized or stainless steel. It could form an excellent humid proof system with elastic sealant.
4. Good ageing resistance.
Typical properties (for reference)
Item | Test result |
Color: | Black; |
Specific gravity | 1.38~1.45g/cm3 |
Solid content | 100% |
Temperature resistant range | -40°C~130°C |
Maximum temperature bearable | 140°C |
Fogging | Without visual fogging |
Shear strength | 0.10Mpa |
Water vapor transmission rate | 0.11 g/m2.d |
thermal weight loss | Max. 0.04% |
Where to use
DJ801 is mainly used for insulating glass together with RT-7500 two-part silicone sealant for insulating glass to finish two layer seal.
Application
Clean and dry adhesion surface to get rid of dirty, oily things. DJ801 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 100°C~130°C. The environment temperature should not be lower than 10°C in application.
Standard
DJ801 conforms to JC/T 914-2003
Packing
Paper drum:7kgs/barrel
Storage
-10°C~35°C, shelf life of 24 months at least.
DJ801 is not dangerous products and could be transported by train, automobile, ship and airplane.
- Q:What is the cover of white pulp, what is the agricultural shrink to help pulp, what is the color paste, adhesives, chemical fast glue?
- Overprinted white pulp is widely used in the printing and dyeing industry cover new varieties of acrylic adhesive and imported modified white dye by a special processing, it has easy to use, the application only need to add appropriate amount of water, Crosslinking agent MCF can be printed, mainly used for polyester and cotton, cotton and other fabric printing, with a smooth driving smooth, hiding power, three-dimensional effect is obvious and so on.
- Q:Common types of glue?
- Resin type such sealant resin-based materials, commonly used resin with epoxy resin, unsaturated polyester resin, phenolic resin, polyacrylic resin, PVC resin.
- Q:What is the difference between a sound sealant and a building sealant?
- Sound insulation sealant in the low temperature (-20 ℃) to high temperature (+ 130 ℃) to maintain good flexibility, long-term effective seal; can be directly used for glass, concrete, brick, metal, plastic, wood and other materials.
- Q:2017 these six trends will have a profound impact on the adhesive market
- Infrastructure construction and residential market development will drive building adhesives in China, Japan and India
- Q:The 18th China International Adhesive and Sealant Exhibition published papers how to find
- The design is to raise questions and plan the initial solution to the problem in order to make the research and writing proceed smoothly. The design of nursing papers should include the following aspects: (1) professional design: according to the needs of the topic and the existing technical conditions proposed research program; (2) statistical design: the use of health statistics method proposed (3) writing design: is the preliminary plan for the preparation of outline and writing writing. (3) Writing design is a preliminary plan for the preparation of outline and writing. In short, the design is a blueprint for nursing research and thesis writing, no "blueprint" can not work.
- Q:What is the difference between RTV industrial sealants and adhesives?
- Sealant mainly from the sealing effect, usually thicker, like toothpaste as creamy. Adhesives mainly from the role of bonding, usually thinner, you can flow.
- Q:What are the trends in the development of electronic adhesives and sealants?
- As the markets of the developed countries are already mature, most companies are moving to developing countries that can provide sustainable market demand in order to avoid threats such as declining sales. According to the new research market report, the Asia-Pacific region's sealant market is expected to reach 8.166 billion pounds by 2017.
- Q:Will the kind of adhesive soluble in water (preferably powder), melting temperature of about 800 degrees, was neutral or weak alkaline, thank you!
- Alginate is slightly soluble in water and insoluble in most organic solvents. It is dissolved in alkaline solution, so that the solution is viscous. Sodium alginate alginate is hygroscopic and the amount of moisture contained in the equilibrium depends on the relative humidity. The dried sodium alginate is stored fairly stable in a well-sealed container at 25 ° C and below. Sodium alginate solution is stable at pH 5 to 9. The degree of polymerization (DP) and the molecular weight are directly related to the viscosity of the sodium alginate solution, and the decrease in viscosity during storage can be used to estimate the degree of sodium alginate de-polymerization. High degree of polymerization of sodium alginate stability is less than the degree of polymerization of sodium alginate. It is reported that sodium alginate can be catalyzed by proton hydrolysis, which depends on time, pH and temperature. The propylene glycol alginate solution is stable at room temperature at pH 3 to 4; when the pH is less than 2 or greater than 6, the viscosity will decrease even at room temperature. The sodium powder is wet with water and the hydration of the particles makes the surface sticky. The particles are then quickly bonded together to form clumps, and the agglomerates are slowly and completely hydrated and dissolved. Alginate is more difficult to dissolve in water if it contains other compounds that compete with alginate for hydration. Water in the sugar, starch or protein will reduce the rate of sodium alginate hydration, mixing time necessary to extend. A monovalent cation (such as NaCl) also has a similar effect at concentrations above 0.5%. The pH of sodium alginate in 1% distilled water was about 7.2....
- Q:What are the types of glass adhesives? Is there any toxicity or contamination?
- Weathering silicone sealant for a variety of curtain wall weathering seal, especially recommended for glass curtain wall, aluminum-plastic curtain wall, stone dry hanging weather seal. Weathering sealant suitable for metal, glass, aluminum, tile, plexiglass, coated glass joint seal; weathering silicone sealant concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum Paint the surface of the aluminum seal. In most cases, no primer is required. Mildew silicone sealant is the trend of the future, there are mildew effect of silicone rubber than the average use of plastic longer,
- Q:What does the "paint layer" mean in the mold?
- OKorder Chemical Co., Ltd. is set research, production of advanced chemical building materials in one of the Sino-foreign joint ventures. The company's production base covers an area of 30,000 square meters, adjacent to the western coastal highways, water and land transportation, geographical advantages, and has strong scientific research and technology, with more than Dr., master of chemical professional researchers, product research And development, and with a number of foreign chemical building materials research institute long-term cooperation, the application of advanced technology, and continuously improve the product quality, leading the trend, driving the market.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High Quality DJ801 Butyl Sealant for Insulating Glass Primary Seal
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords