High Quality Clamp saddle with brass insert PN16.

Ref Price:
$4.59 / watt
Loading Port:
Ningbo
Payment Terms:
TT or LC
Min Order Qty:
1000 watt
Supply Capability:
100000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

High  Quality  Clamp  saddle  with  brass  insert  PN16.1.It is used in industrial fields, agriculture and garden irrigation 2. Beauty appearance.3.Thermal insulation and energy saving.4. Easy installation 5.excellent heat resistance and pressure resistance 6. affordable price

1.Material:Random Polypropylene(Hyosung R200P); 
2.ISO9001&ISO14001; 
3.Standard:GB/T 18742.3-2002, DIN8077/8078; 
4.OEM also ok

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Hot melt connection method of PE-RT plastic pipe and the matters needing attention?
When the connection is made, the pipe end without rotating is inserted into the heat sleeve to be inserted into the marked depth, and at the same time, the pipe fittings without rotating are pushed on the heating head to reach the designated mark. Heating time should meet the requirements of the above table (also according to the provisions of the manufacturer of hot melt tools);
Q:What are the common connecting methods for plastic PP pipes?
Because the hot melt connection method does not need any additional material, and can melt the connection part as a whole, achieves the body strength, the connection effect is good, therefore, here recommends the use of hot melt connection method. The use of hot-melt bonding method should pay attention to the following: first, the hot melt tool to connect the power supply, to the working temperature, the indicator light before the start of operation; II. Cutting the pipe material, you must make the surface perpendicular to the pipe axis. The general use of pipe cutting scissors or pipe cutting machine, using sharp hacksaw when necessary, but after cutting the pipe section should remove burrs; the PP pipe and pipe connection end must be clean, dry and free of grease; the welding elbow or three pass, according to the requirements of design drawings, we should pay attention to its direction in a straight direction pipe and tube, mark the location with the auxiliary mark the connection, no rotation; the end of the guide tube heating sleeve is inserted into the standard depth, at the same time, no rotating the pipe onto the heating head and reached the prescribed mark; the heating time is reached after, immediately put the pipe and pipe fittings from the heating sleeve and the heating head removed simultaneously, quickly and without rotation inserted into the standard depth, making joints form a uniform flange of the joint can be corrected, but not the rotation; to a prescribed cooling time, will The pipe cover is buckled on the pipe fittings.
Q:What are plastic PVC pipes and pipe fittings made of?
Plastic PVC pipe fittings, material and pipe, like pvc.
Q:What tools and methods are needed for the installation of plastic hoses and steel tubes?
Is three (four pass) into the vertical connection pipe and the horizontal branch, cause the connection to form water jet flow, pipe flow is not smooth, the drainage system pressure fluctuations, sanitary ware water drainage pipe can be destroyed, poisonous and harmful gas in the indoor environment pollution caused by the invasion. The correct approach is to install 45 here. Three or three times through cable.
Q:What's the size of the PPR pipe?
When the connection is complete, both the pipe and the pipe must be held tightly and enough cooling time is allowed to cool down to a certain extent before the release of the pipe is continued.
Q:What are the differences between electrofusion welding, hot melt welding and welding connection?
Hot melt is to use materials for heating and melting of special equipment, and even after the material is cooled. The hot melt pipes used in the project are all hot melt, and the construction is convenient and economical;
Q:TTP-PESI hole net steels belt composite pipe fittings need to be taken?
The wire mesh and steel band composite plastic pipe is one of the achievements in the Ministry of construction's scientific and technological achievements. As a transportation pipeline, it can be widely used in petroleum, chemical, pharmaceutical, mining, municipal engineering and so on.
Q:The difference between the hot melt connection and connection to electricity
The use of the machine is not the same, fused link using electro fusion welding machine, currently on the market in Tianjin to more hot melt connection using hot melt welding machine manufacturers, more than;
Q:Doubts about the connection of plastic pipe and steel pipe flange?
Plastic pipe flanged fittings such as PPR, to have the corresponding, the flange pipe diameter, as long as the nominal nominal pressure and nominal diameter, nominal pressure pipe, bolt holes can be matched. Because the outer diameter of the pipe has been considered in the pipe fittings, there is no need to worry.
Q:What kinds of PE pipe joint
PE pipe joint into sleeve, elbow, three, three, two grade saddle.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range