Wire Braided Hydraulic Hose
Construction: this hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Applications: this section covers hose for use with petroleum
Temperature range: -40℃ to 100℃
Minimum bend radius
High oil/ fuel/ gasoline/petrol /hydraulic fluid resistance performance synthetic rubber
One or two high tensile synthetic yarn braids reinforcement or steel wire reinforcement
Weather protective, heat and oil resistant synthetic rubber. (corrugated finishing)
-30C to 120C
Black, Red, Green, Blue, Yellow, Grey
Cloth surface or smooth surface
Variety of application for delivery of gasoline,kerosene,diesel oil,lubricating and other mineral oil.
Packaged by plastic woven bag or carton
- Q:My company does high-quality rubber tube, all of the core method, and why use EPDM to do the inner tube, it is difficult to take off the core, please point out! What's the reason?
- The core needs to be removed, and if it is too long, the mandrel can be divided into two sections and separated from the 2 sides
- Q:Can black soft rubber pipes be used as water pipes? Why is there a pungent odor?
- If you have a strong smell, it must be made of reclaimed gum, and it's inferior reclaimed gum. You smell the smell of reclaimed tar.
- Q:What advantages does the Parker hose have in comparison with other hydraulic hoses?
- Parker hose and other hydraulic hose advantages compared to:First: from the price point of view, the price of PAKER is the most expensive industry. High popularity.Second: if from the quality point of view, the quality of stability, high degree of recognition.Third: from the point of view of use, the difference is not obvious. PAKER things match well.Fourth: strong pressure resistance, rated 400bar hose, blasting pressure can reach close to 1000ba
- Q:What is the method of making large diameter rubber joint?
- Method for making large caliber rubber parts:Mold making: external shell, internal steam box, steam, internal core, hydraulic cylinder do support (two years earlier, with Jack) and high strength rubber cord wrapped into the mould, after high-temperature steam curing, eventually forming.
- Q:The gas water heater uses metal pipes and rubber pipes
- Gas water heater using metal pipe, good heat resistance, no aging!
- Q:Acid burette and how to distinguish the basic buret
- The following is a rubber tube acid basic titration burette is below the piston
- Q:What is a hose valve?
- The rubber tube is made of imported rubber and is made by special chemical formula. The utility model has the advantages of wear resistance, corrosion resistance, frost resistance, full sealing, no leakage, etc.;It is superior to gate valve, globe valve, regulating valve and stainless steel valve;It is convenient to overhaul, simply disassemble the valve body and replace the rubber tube. The valve body and the headstock can be used permanently. The cost is extremely low, and the service life can be raised by more than 3-5 times.Medium in the hose running, no flow resistance, do not touch the opening and closing mechanism and valve body, so as not to block the running parts, the operation is particularly flexible, greatly easing labor intensity.
- Q:What are the types of metal hose couplings?
- DKJ jointStructure and characteristics:The DKJ card sleeve type metal hose joint can connect the steel pipe without the screw and the hose, and save the thread setting process, just screw the screw in;The metal joint is made of zinc alloy. The surface is zinc plated, sanded or chrome plated. The structure is compact and the strength is high. The steel pipe and the metal hose are connected reliably, and the appearance is beautiful;The metal fittings are jacketed to connect the metal hose to the non threaded steel tube;Suitable metal hose: JS, JSH, JSB, JSHG;Adaptation: steel thin steel wire pipe, black, tin pipe (water, gas);When choosing DKJ card type metal joint, please pay attention to the specification and size of the connecting pipe hose.
- Q:What material is the rubber joint used in the desulfurization pipeline? What's the difference?
- Three yuan EPDM rubber joint can be used, PN4-6 is no problem. Generally, the desulfurization pipeline is weak acid base,
- Q:Difference between non-standard rubber joint and national standard rubber joint
- Non standard is in shape and about the structure of standard atlas case material of flange thickness, flange ring thickness, diameter and thickness that relax the requirements, strictly speaking, these are unqualified products, of course, a certain extent to relax the standard does not affect the use, but too much to the influence of the relaxation of standards to use performance.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range