High Efficent Disel Forklift Truck 8.0T with Good Price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 500 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Name: Efficent Disel Forklift Truck 8.0T with Good Price
1. Specification
GENERAL INTRODUCTION | 1 | MODEL |
| FD60B-W1 | ||
2 | POWER TYPE |
| DIESEL | |||
3 | RATED CAPACITY | kg | 6000 | |||
4 | LOAD CENTRE | mm | 600 | |||
CHARACTERISTIC AND DIAMENSION | 5 | LIFT HEIGHT | mm | 3000 | ||
6 | FORK SIZE | L×W×T | mm | 1220×150×65 | ||
7 | MAST TILT ANGLE | F/R | Deg | 6°/12° | ||
8 | FRONT OVERHANG（Wheel center to fork face） | mm | 487 | |||
9 | GROUND CLEARANCE | mm | 140 | |||
10 | OVERALLDIMENSION | OVERALL LENGTH（Without fork） | mm | 2460 | ||
11 | OVERALL WIDTH | mm | 1150 | |||
12 | MAST LOWERED HEIGHT | mm | 1985 | |||
13 | MAST EXTENDED HEIGHT （With Backrest） | mm | 4030 | |||
14 | Overhead Guard Height | mm | 2070 | |||
15 | TURNING RADIUS (outside) | mm | 2170 | |||
PERFORMANCE | 16 | Speed | TRAVEL（Full load） | km/h | 19 | |
17 | LIFTING （Full load） | mm/s | 490 | |||
18 | MAX. GRADEABILITY | % | 20 | |||
FRAME | 19 | TIRE | FRONT | 7.00-12-12PR | ||
20 | REAR | 6.00-9-10PR | ||||
21 | WHEELBASE | mm | 1600 | |||
22 | SERVICE WEIGHT | kg | 3350 | |||
POWER AND TRANSMISSION | 23 | BATTERY | VOLTAGE/CAPACITY | V/Ah | 12/90 | |
ENGINE | ||||||
25 | MAUFACTURE |
| ISUZU C240 | |||
26 | RATED OUTPUT/R.P.M | kw/rpm | 37/2650 | |||
27 | RATED TORQUE/R.P.M | N·m/rpm | 148/1800-1900 | |||
28 | NO.of CYLINDER |
| 4 | |||
29 | BORE×STROKE | mm | 90×105 | |||
30 | DISPLACEMENT | cc | 2540 | |||
31 | FUEL TEAK CAPACITY | L | 60 | |||
32 | GEARBOX | TYPE | ELECTRICAL SHIFT/MANUAL SHIFT | |||
33 | STAGE | F/R | 1/1(2/2) | |||
2. Application
For Transporting Goods
3. Package
Put into containers.
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some High Efficent Disel Forklift Truck 8.0T with Good Price according to customers request?
A4: Yes, we can produce High Efficent Disel Forklift Truck 8.0T with Good Price according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:What if the forklift oil is burned and the oil is burned
- Gas in the tubing, not oil.Have you had electricity for half a day? Electricity is not enough,
- Q:The width of the forklift truck aisle should be left over.
- It depends on several aspects: 1 tray size, especially in the x direction, because it directly affects the fork teeth and selection of forklift and forklift selection. 2 according to the result of forklift truck selection can get his right Angle stacking radius. 3 according to the amount of space between beams or consider span beam length across (if any), calculated the length of the tray out * 24 security tray width, and then combined with forklift rectangular storage minimum value, then add a safe width is ok
- Q:The forklift license test is for those
- Security, the structure of the car, the books. The main thing is,I hope my answer will help you
- Q:The forklift is limited in the factory area
- There's no specific speed limit for the forklift truck, 5KM? If say, the goods of factory assembly line is very big, can you be busy? Actually because of its different purposes and ordinary vehicles, forklift again because of its structure characteristic determines not speeding, so at the time of design is not designed to be fast, general fuel forklift with the highest speed, is about 22 km, the battery is 13 km or so commonly, whether in the warehouse or factory, or the ramp, the key is to see the driver's operation, if is is to limit the speed, fuel car can speed limits on the accelerator, the battery can adjust the height of the accelerator pedal, to limit, if you want to completely, seek after-sales personnel, the parameter adjust the speed of the electric control device.
- Q:How to tell the truth from a forklift?
- The forklift card is issued by the bureau of quality supervision, and after 40 days, you can check the Internet and check the Internet. Enter the "state quality technology supervision bureau" in baidu. You will see the website "national quality supervision and inspection and quarantine portal, http:// www.aqsiq /".
- Q:Where is the enterprise forklift special operation certificate?
- The operation certificate of special operation of the forklift truck is handled in the administrative service center. A special operations training organization shall apply for a certification procedure The training courses for special operations must be reported to the city security bureau in advance. The special operations training organization shall, in the week before the application for examination, be submitted to the municipal security bureau for reference. 3, city bureau to apply for the inspection report, and training institutions agreed to the inspection date and send inspection member to the examiners training institutions, examination paper copies, according to the register population to determine test after sealed by the inspection member carry. After the evaluation is over, the appraisals will be evaluated within 2 days.
- Q:Is it dangerous to drive a forklift?
- Some! As far as I know forklift is dangerous, maybe you haven't contact with the line, or contact time is not long, I experience that once I driving forklift fast and then a sharp turn, forklift nearly doubled, at that time if it weren't for reflect the fast, I'm afraid his life did not have. Another time I looked at a colleague who was pushing a woman to death when he turned from the door. So you have to be careful about driving a forklift. Work 3-4 hours and you will feel mentally paralyzed, especially in the middle of the summer, so drive a forklift must be focused
- Q:Hydraulic forklift and what hydraulic oil
- The working medium of manual hydraulic forklift is oil fluid and needs hydraulic oil.I hope my answer will help you
- Q:What's the matter with forklift
- (2) the ball head of the rod is adjusted. (3) the steering screw is adjusted too tightly or the bearings are damaged. (4) the steering gear is lubricated by lubrication, such as oil in the steering machine. The ball section is not lubricated in time to increase the friction resistance. Diagnosis and discharge to turn the steering wheel, such as feel at ease, that good steering machine interior, should check whether transmission mechanism with tight and poor lubrication, adjustment, lubrication when necessary
- Q:The forklift oil cylinder is leaking, and the newly replaced oil seal is no good
- Inside leak, you check if the piston rod is injured. There is no scratch inside the cylinder. Let's see if the piston has a stomata. Maybe the piston and the piston rod link to where the sealing is not good. Check it out carefully.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
High Efficent Disel Forklift Truck 8.0T with Good Price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 500 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
