|Place of Origin:|
Analog 25/30fps at 720P/960P, High speed, long distance real-time transmission over 500m via coxial cable,Smart IR, IP66, DC12V
AHD (Anaglog High Definition) is an over-coaxial-cable analog HD Video transmission standard which developed in-house. The technology renders two HD video formats---1920H(1920X1080)&1280H(1280X720) by progressive scanning.
What AHD brings?
*1/2.9" 1Megapixel CMOS
*25/30fps at 720P/960P, Built-in IR Cut
*High speed, long distance real-time transmission over 500m via coxial cable
*Day/Night(ICR), AWB, AGC, BLC, 2D-DNR
*Smart IR, IP66, DC12V
*AHD-M Analog High Defination Output
*IR-III Array Leds 2pcs
*40~50m IR distance
*2.8~12mm Varifocus Lens
*Bracket is Included
1/2.9" 1Megapixel CMOS
Video Frame Rate
25fps at 720P
30fps at 720P
0.01Lux at F1.2(AGC ON), 0Lux IR on
1-channel BNC HDCVI high definition video output
Max. IR LEDs Length
2pcs IR Array Leds, 50m, Smart IR
Auto(ICR) / Color / B/W
2.8~12mm Varifocus Lens
-30°C~+60°C / Less than 95%RH (no condensation)
Over 500m via 75-3 coaxial cable
242mm × 86 x 84mm
- Q:How to remotely monitor the phone
- 1, the first network camera installed, connected through the network cable to the switch, the network camera connection is not the need for each network cable must be unified in a switch (such as: need to install a camera in the distance, if you want to install ten Camera so the traditional camera is necessary for each coaxial line must be inserted at the same time in a video recorder can be used normally, but the network camera can add a switch, that has ten network switches into a network only need to pull To another switch on the normal use, so do not have to spend a lot of trouble, save a lot of labor)
- Q:What kind of surveillance camera is good
- The performance of the camera is mainly the minimum illumination (that is, the ability to adapt to the dark light), focal length (according to your workshop to install the camera position and to monitor the range of fixed focus, the shorter the shorter the focal length of the larger image is not very clear
- Q:I installed a monitoring camera admin user password forgotten! How do you handle
- Terry: username admin password empty
- Q:Monitor the camera image virtual how the matter
- 1, the camera itself. If you can replace the camera can be resolved, you can determine the camera itself is the problem, can be returned to the factory maintenance.
- Q:What is the effective range of infrared surveillance cameras?
- Infrared probe about 3 meters to 12 meters between ~ ~ some special except to see the main object of the strong degree of reflex is not strong.
- Q:Monitor how the camera looks online
- If it is a normal camera, then it must be connected to the computer, the computer will be real-time upload information on the camera must be the server. First, the router must have a forwarding function, such as a peanut shell. After logging in to the router, upload the LP address of the video host at the forwarding rule. Go to the dynamic DMMS where to apply for peanut shell, apply for a good login, login success will appear in the lower left corner of the LP and then on the page HTPP: / / plus the acquisition of LP: plus port can be.
- Q:The monitor camera does not display the image on the display
- First, the camera is broken, two, the information line and plug the connection is not good, three, the camera driver is not installed, the resolution is too high tune.
- Q:Install the monitor camera need to put a few lines
- In the case of a dome camera that can be rotated, three lines, one control line (from the recorder to the camera), one video cable (from the recorder to the camera), one power cord (from the recorder to the camera, or the nearest socket Can also be).
- Q:What is the difference between a camera and a monitor?
- Camera digital camera The wide range of cameras, the basic principles of its work are the same: the optical image signal into electrical signals, in order to facilitate storage or transmission. When we shoot an object, the light reflected on the object is collected by the camera lens, focusing it on the light receiving surface of the camera (such as the target surface of the camera tube), and then through the imaging device to light into electricity, that is, "Video signal". Photoelectric signal is very weak, need to be pre-amplifier circuit to enlarge, and then through a variety of circuits for processing and adjustment, the final standard signal can be sent to the recorder and other recording media recorded, or spread through the transmission system or sent to the monitor display.
- Q:What is the reason for monitoring the camera's black screen?
- Fourth, the monitoring of the video signal line broken (including line damage, poor contact), but also cause a black screen.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range