Q:PVC pipe and duct tape tape what is the difference

Duct duct tape:Duct tape is to heat the textile fiber cloth as the substrate. The utility model has the advantages of strong peeling force, tensile resistance, grease resistance, aging resistance, temperature resistance, water proof and corrosion prevention, so that the utility model is also used for pipe waterproof.I hope my answer will help you

Q:How to set the polyethylene anticorrosive adhesive tape?

1, to strengthen the level such as anti-corrosion, anti-corrosion thickness of 1.0mm; corrosion level reinforced, corrosion thickness of 1.4mm2. According to the bonding method of the inner and outer belt of the anticorrosive adhesive tape, the thickness of the anticorrosive adhesive tape is determined.

Q:What's the performance of PVC tape?

Use: used for dressing, wire and cable 600V fixed, insulation protection, environmental temperature at 70 degrees Celsius, the following basic waterproof 900V electrical equipment insulation, electrical submersible pump wells, lead wire, insulated overhead line joint inner cladding waterproof insulation.

Q:How many or how many hours can the scotch tape decompose?

The plain adhesive tape is made of PVCPVC has a flame retardant (flame retardant value of more than 40)

Q:What is a composite PE tape?

Main technical specifications of adhesive tape1. Tensile strength >20MPa; patch >15MPa2, elongation at break is >200%, >300%3, peel strength >20N/cm; to coating primer steel plate >5~10N/cm; to back material >5~10N/cm4. Electrical strength >3MV/m5, water absorption rate <0. 03%Main technical specifications of primer1, table dry time 1~5min2, viscosity 10~15s

Q:Points above to get the glue paper tape on the door to deal with

Styrene also has the same effect, so styrene can also be used

Q:How many kilograms per square meter is polyethylene pipe adhesive tape?

In accordance with the current SY/T0414---2007 and HG/T20679---2014 two technical standard of anti-corrosion coating grade requirements, high quality polyethylene adhesive tape coating in order to calculate the thickness of grade should weigh: ordinary level of 0.80 kg / m2, strengthening the level of 1.15 kg / m2, reinforced 1.61 kg / m2.

Q:What specifications do you have for PVC electric tape?

PVC resin powder, by model. In our country, the most common is SG-5, then SG-3, SG-7, SG-8 and so on. So what is the distinction between various types, commonly used in industry or the viscosity value of K indicates the average molecular weight of PVC (or the average degree of polymerization), is the length of the molecular chain of PVC, to determine and distinguish between resin grades and corresponding processing parameters. The molecular weight of the resin is related to the physical and mechanical properties of the product.PVC resin is a non crystalline linear polymer, its molecular weight is bigger, the viscosity of the higher molecular weight, tensile strength, impact strength and elastic modulus of products is higher, but the fluidity and plasticity of the resin melt down. The molecular number of polymers is usually expressed in terms of viscosity, and the type of polymer is divided. Here we will analyze the characteristics of each model:

Q:How to correctly use cold resistant anti freeze PVC electric adhesive tape

Method of using electrical tape, said the first film, in the tape when the first open,

Q:What are the uses of black cloth tape

I learned on the PVC plastic network: PVC insulation tape and PVC insulation tape is not the same kind of adhesive tape