heat resistance silicone rubber hose, intercooler turbo silicone hose kit

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 m
Supply Capability:
200000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


Product Description:

1. Name:   silicone hose

 

2.Specification :

1) Material:  100% high quality silicone

2) Shape:  Straigh/elbow

3) Reinforced layers: 3-4Ply  Polyester/Normex reinforced

4) Resistance temperature: -40°C to 260°C

5) Pressure range: 0.3 - 0.9MPa

6) Wall Thickness : 2 to 6mm

7) Colors: Red/yellow/green/orange/white/black/blue/purple etc.

8) Advantage:  Polyester or nomex layers to enable high temp and pressure than original rubber hose does and the silicone tube can bear the high low temperature, non-toxic tasteless, insulation, anti-ozone, bear burning , oil resistance.

9) Usage:Turbine superchargers and coolants.

 

 

 The  Specification of Silicone Hose

 

Item NO.Inner diameterInner diameterLayes/ThicknessLength
E90,E45-6.56.5mm*6.5mm1/4inch*1/4inch3ply     4.5mm63mm
E90,E45-88mm*8mm5/16inch*5/16inch3ply     4.5mm  63mm
E90,E45-9.59.5mm*9.5mm3/8inch*3/8inch3ply     4.5mm  63mm
E90,E45-1111mm*11mm7/16inch*7/16inch3ply     4.5mm63mm
E90,E45-1313mm*13mm1/2inch*1/2inch3ply     4.5mm102mm
E90,E45-1616mm*16mm5/8inch*5/8inch3ply     4.5mm102mm
E90,E45-1919mm*19mm3/4inch*3/4inch3ply     4.5mm102mm
E90,E45-2222mm*22mm7/8inch*7/8inch3ply     4.5mm  102mm
E90,E45-2525mm*25mm1inch*1inch3ply     4.5mm102mm
E90,E45-2828mm*28mm 1-1/8inch*1-1/8inch3ply     4.5mm102mm
E90,E45-30  30mm*30mm      1-3/16inch*1-3/16inch 3ply     4.5mm102mm
E90,E45-32 32mm*32mm1-1/4inch*1-1/4inch3ply     4.5mm102mm
E90,E45-3535mm*35mm1-3/8inh*1-3/8inch3ply     4.5mm102mm
E90,E45-3838mm*38mm1-1/2inch*1-1/2inch3ply     4.5mm102mm
E90,E45-4141mm*41mm1-5/8inch*1-5/8inch3ply     4.5mm102mm

 

Item NO.Inner diameterInner diameterLayes/ThicknessLength
E90,E45-4545mm*45mm       1-3/4inch*1-3/4inch3ply     4.5mm102mm
E90,E45-4848mm*48mm1-7/8inch*1-7/8inch3ply     4.5mm102mm
E90,E45-5151mm*51mm2inch*2inch3ply     4.5mm102mm
E90,E45-5454mm*54mm 2-1/8inch*2-1/8inch 3ply     4.5mm102mm
E90,E45-5757mm*57mm2-1/4inch*2-1/4inch 3ply     4.5mm102mm
E90,E45-6060mm*60mm 2-3/8inch*2-3/8inch 3ply     4.5mm125mm
E90,E45-6363mm*63mm 2-1/2inch*2-1/2inch 3ply     4.5mm125mm
E90,E45-6565mm*65mm 2-9/16inch*2-9/16inch 3ply     4.5mm125mm
E90,E45-6868mm*68mm 2-5/8inch*2-5/8inch 3ply     4.5mm  125mm
E90,E45-7070mm*70mm 2-3/4inch*2-3/4inch 4ply     5.0mm125mm
E90,E45-7676mm*76mm 3inch*3inch 4ply     5.0mm125mm
E90,E45-8080mm*80mm 3-1/8inch*3-1/8inch 4ply     5.0mm125mm
E90,E45-8383mm*83mm3-1/4inch*3-1/4inch4ply     5.0mm125mm
E90,E45-8989mm*89mm3-1/2inch*3-1/2inch4ply     5.0mm125mm
E90,E45-102102mm*102mm4inch*4inch4ply     5.0mm152mm




Packaging & Shipping

Firstly, a transparent film wrapped on the hose cover

Secondly, nylon bag spiraled or woven

Finally, pallet under each roll of hose  


15-20 days for one 20'GP container

Terms of Shipping: By Sea, By Air, By Railway


More Choice






FAQ’s

Q1. Do you have any international certificate ?

A. Yes. we have CE, ISO, API, CCS.

Q2. Do you have a minimum order?

A. We ask for only a $10.00 minimum order.

Q3. Can you produce the hose with my own brand?

A. Yes, we have been offering OEM services for 10 years.

Q4. Who are your customers?

A. Wholesalers, retailers, enduser, individual.

Q5. What's your lead time?

A. It usually takes 3 to 15 days.

Q6. What are your payment terms?

A. 30% advanced payment, 70% before shipment.

Q7. How will you ship my order?

A. By sea(FCL, LCL), by air, by railway.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What does the letter of the high-pressure tubing connector mean?
Abnormal vibration of high pressure oil pipe and abnormal vibration of high pressure tubing joint lead to oil spill. It is a complicated problem. becauseThe high-pressure oil pipe is connected with a high-pressure oil pump and an injection machine, and belongs to the fuel injection system, and the function is very important. High pressure tubing canUnder high pressure of up to 150MPa, abnormal vibration can cause great loss, but also existsA great fire hazard. To troubleshoot, the injector valve is opened and closed at work to allow the high-pressure tubing to be producedStrong high frequency vibration, which is one of the important causes of damage to high pressure tubing.
Q:What glue can glue rubber tube?
1: clean: high temperature, quick drying glue, use dry cotton cloth or sand paper, then dust, oil, rust, etc., and then use the treatment agent or cleaning agent to clean, then clean the surface.2, sizing: flexibility speedglue unscrew the front cover, can be used as a glue bottle with cotton cloth to wipe clean and quick drying glue, can be set using needles or PE dropper, to control the flow of glue, ensure the bonding effect.
Q:What is the principle of communicating devices? What if the rubber tube is used as a connecting device to change the water for the fish?
The principle of communicating devices can be explained by liquid pressure. If the same liquid is contained in a U glass tube, a small liquid AB is conceived at the center of the bottom of the communicating device. If the liquid is stationary, it does not flow. The pressure of the liquid in the left tube toward the right side of the liquid AB must be equal to the pressure of the liquid in the right tube toward the left of the liquid AB. Because in the communicating vessel is filled with a liquid, the same two liquid column density, according to the formula of P= P GH liquid pressure that only when both sides is equal to the height of liquid column, the liquid column is equal to the pressure on both sides of the liquid film AB. Therefore, in the case of no flow of liquid, the liquid level in each vessel of the communicating device shall be kept flat. (ideal model method) the connecting device is characterized in that the liquid level in each container is flat only when the same liquid is contained in the container. If the container is tilted, the liquid in each container is about to begin to flow. One end of the liquid column flows to the lower end of the liquid column and stops flowing until the liquid level in each container is normal. As with rubber tube two glass tubes connected together in container with a liquid, which will be a fixed tube, the other tube up and down or tilt, can see the two tube level in stationary phase remained flat. The connecting device is provided with the same liquid, but the pressure on the liquid surface is unequal, and the pressure difference of the liquid surface is equal to the pressure difference produced by the liquid level difference of the two container of the communicating device.
Q:What kind of material does hose screw protection cover have? What are their advantages and disadvantages?
The utility model relates to a pipe protecting sleeve, which is a new product replacing the traditional metal protecting spring used for the protection of traditional rubber hoses. Alias: hose sheath, rubber tube outside protection special nylon spiral sheath, etc..
Q:How can I connect the gas tank connection hose?
The general is directly inserted into the connector on the line, if loose, can use wire twist, still feel not reliable, can go to the market to buy two hoop, screw on the line.
Q:Difference between non-standard rubber joint and national standard rubber joint
GB and non standard. GB type rubber joint refers to the material selection and production in accordance with the relevant 02S404 or 02S312 standards of the Ministry of construction, and has strict requirements on flange thickness, flange thickness, diameter and thickness.
Q:Can the natural gas hose not exceed 1.5 meters or 2 meters?
The gas hose on the principle of not more than 1.2 meters, and regularly check the technical requirements, 1-2 must be replaced if the temporary gas can also be longer, if long-term use, as far as possible the use of metal pipe joint and the gas stove can also use metal hose, high safety factor.
Q:Why can the air conditioning connection be made of copper tube? How about rubber tube and aluminium pipe? Please heroes pointing for the dishes.
In fact, aluminum can, such as the refrigerator evaporator is aluminum, not only with the hose, the hardness is not enough in fact even the refrigerator either with brass or aluminum, for a long time or leakage, so you can not use the hose. The aluminum tube in the fridge is the easiest place to leak
Q:Is hot melt hose toxic and harmful?
Hot melt pipe using imported Teflon liner, has good flexibility, anti adhesion and resistance to high temperature (up to 250 degrees), can greatly reduce the carbonization phenomenon;
Q:What's the smell of petrol in the car and the trunk?! Especially after a long drive!
Some owners of the gas fuel to add too full, while refueling no leakage, but gasoline but follow the line and into the carbon canister in the tank, the steam release even a gasoline release out, if it is in air conditioning circulating state, the car will be able to smell the smell of gasoline.Solution: as long as the carbon canister inside the gasoline consumed, the excess carbon canister gasoline vapor through the engine negative pressure into the cylinder combustion, there will be no gasoline vapor overflow, and then open the window ventilation is.If you smell the smell of gasoline at the same time there is a pungent rubber flavor, it should be careful, there may be a harbinger of fire, you have to do a good job of checking and preventive measures in advance.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range