HDPE Geomembranes 1.0mm from Manufactory

Ref Price:
$2.35 / m²
Loading Port:
Qingdao
Payment Terms:
TT or LC
Min Order Qty:
10000 m²
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

HDPE Geomembranes 

Product Description
HDPE Geomembrane is extruded PE membrane formed by adding anti- oxidant, absorbent of ultraviolet and dyestuff into HDPE or LDPE or EVA and will provide an effective barrier to of liquid water and water vapor.
Product Application
1. Municipal project.
2. landfill treatment project.
3. Waste water treatment.
4. Mineral waterproofing.
Product Advantages:

1. High flexibility, high waterproof coefficient.

2. Could be used in the temperature of -70 ℃~110 ℃.
3.Good stability, anti acid and alkalis,anti-erosion.
4.High climate bearing ability, excellent in anti-aging.
5.High tensile strength and elongation, can be used in bad geology and climate, especially be used in the soil uneven sedimentation.
6.High friction coefficient.
Product Specification
1. Thickness: 1.0mm to 3.0mm.
2. 4m-9m in width, roll length as design or client's request.

Product Characteristics
1.HDPE performs well in mechanical properties ,ageing-resistance , chemical-resistance ,climate- resistance and resistance to puncture .
2.LDPE & EVA feathers great elongation, good flexibility at low temperature, softness and easy installation.
3.ECB ,high-class waterproofing rolls, is formed by combining ethylene polymer with oil-resin.
Product Features:
1.All physical factors such as anti-draw, anti-tear, and anti-stab meet the requirement of water works, chemicals, tunnels,and transportation project in most conditions.
2.Good aging, durable performance, and wide temperature range, it can be useful over thirty years on the condition of -60æ«60æ.
3.Anti-stab and fine friction factors.
4.Canker proof, acid and alkali proof, untoxic.
5.Lower cost per unit area, cost is 1/3«1/2 lower than that of PVC film, glass and cloth.
6.Convevient to install and dependable effect.

FAQ:

Q: What kind of payments does jenor support?

A: T/T, L/C, Cash are accepted.

Q: Do you charge for the samples? 

A: Accordeing to our company policy, the samples are freee, we only charge the freight fee. And we will return the freight fee during the next order. 

Q: Can you produce according to customers' design? 

A: Sure, we are professional manufacturer, OEM and ODM are both welcome.


HDPE Geomembranes with High Quality from Manufactory

HDPE Geomembranes with High Quality from Manufactory

HDPE Geomembranes with High Quality from Manufactory

HDPE Geomembranes with High Quality from Manufactory


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:does Landfill reservoir area include the part that is buried in the anchorage ?
it doesn't include the area in retractable and anchoring area. the actual coverage area does not contain a linker.
Q:Geomembrane sn2/ what does pe represent for?
Two cloths one membrane,
Q:Which application fields is HDPE geomembrane chiefly suitable for?
HDPE geomembrane is mainly suitable for the moisture and leakage of highways and channels.
Q:How to weld the geomembrane better?
1, the geomembrane should be extended from the bottom to the high position and should not be stretched too tight with 1.50% of height left in case of local subsidence. Considering the actual situation of the project, the side slope should be paved from top to bottom. 2, adjacent longtudinal joints should not be in a horizontal line and should be staggered over 1m. 3, longtudinal joints should be more than 1.50M away from dam toe and the corner of clubfoot and it should be put on the plane. 4, it should be laid at the side slope and then the bottom. 5, When the side slope is laid, the direction of the film should be parallel to the maximum gradient line.
Q:How to fix template by pouring concrete after laying geomembrane?
1, start pouring room, finished room 2, mix proportion condition on the site: Cement: Sand: Stone: Water: 3, Metering conditions on the site: cement lack of KG sand lack of KG stone lack of KG water lack of KG (plus vehicle weight case) concrete step exemption 4, concrete slump casual inspection does not comply with the requirements of mix proportion 5, record the number of sets of concrete specimen and intensity of the construction unit; 6, record pouring thickness of cusion layer, elevation condition and pouring sequence (which axis)
Q:Does the electrothermal film consume a large amount of electricity?
Electrothermal film radiant heating is a comfortable and energy-saving heating mode with radiant heat as main principle, usually divided shed plastic film radiation heating, mulching film radiation heating. The latter is commonly used now. Electricity consumption is not very large, the electricity consumption of a 14-square meter room is about 0.7 degrees per hour.
Q:Is electrothermal film heater good?
Electrothermal film heater is not very ideal, because ports must be left for each films, and it must be done on site, if workers are not professional enough, there will be many problems, the most troublesome is that the floor has to be prized up. And the quality of films are different, some films can be punctured at some point soon. You'd better select films with good quality, or just choose heating cable. As for heating cable, you'd better choose American Marley. It is said that ports are left before delivery, you don't have to do it on site. And it can also be used in
Q:Is it useful to stick film for iPhone?
Yes, it is. 1. The gardness of iPhone glass is larger than fingernails and metals like keys, so these things scratch it. 2. Many components in dust and sand wind, such as quartz, is harder than the glass. For example, if some grains of sand containing quartz in your hand, they will cause permanent scratches to the iPhone glass. 3. In terms of the service time, the mobile phone is a durable product, but after 2 or 3 years, you will buy a new one. 4. Therefore, if you use it carefully and do not mind scratches, you need not to stick film, otherwise you had better stick film.
Q:How to install and use geomembrane impervious instrument?
Q:What are the uses of geotextiles?
Properties of geotextiles are as follows. 1. At present, geotextiles are made from synthetic fibers, namely the chinlon, dacron, polypropylene fiber and polyethylene fiber which all have high corrosion resistance. 2. Geotextiles are permeable. So they perform well in filtration and separation. 3. Because of the incompact structure, geotextiles perform well in dewatering. 4. Geotextiles have high anti-puncture ability. So they perform well in protection. 5. Geotextiles have high friction coefficient and strength of extension which means they can be used for reinforcement.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range