Hand Stacker SFH series hydraulic power

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 unit
Supply Capability:
1 unit/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

stacker is a large machine used in bulk material handling. Its function is to pile bulk material such as limestone, ores and cereals on to a stockpile. A reclaimer can be used to recover the material.

Gold dredges in Alaska had a stacker that was a fixed part of the dredge. It carried over-size material to thetailings pile.

Stackers are used to stack in different patterns, such as cone stacking and chevron stacking. Stacking in a single cone tends to cause size segregation, with coarser material moving out towards the base. In raw cone ply stacking, additional cones are added next to the first cone. In chevron stacking, the stacker travels along the length of the stockpile adding layer upon layer of material.

Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically aprogrammable logic controller, with a human-machine interface for display, connected to a central control system.

 

 

Model

unit

SFH0519

SFH1019

SFH1519

SFH2019

Lifting capacity

500

1000

1500

2000

Max lifting heightmm

1900

1900

1900

1900

Fully loaded lifting peedmm/time

14

14

11.5

9.28

Fork height of loweredmm

90

90

90

90

Wheelfront wheelmm

Φ80

Φ80

Φ80

Φ80

rear wheelmm

Φ180

Φ180

Φ180

Φ180

overalldimensionLmm

1640

1640

1640

1640

Wmm

730

730

730

730

Hmm

1550

1550

1500

1666

Self weightkg

220

265

360

Fork lengthmm

1110

1110

1110

1100

min turning radiusmm

1350

1350

1350

1350

 

Hand Stacker SFH series hydraulic power

Hand Stacker SFH series hydraulic power

Hand Stacker SFH series hydraulic power

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Diesel forklifts generally take a long time to replace the oil
Change the oil and oil filter in about 200 hours, if the environment is bad, the air filter will be cleared.
Q:There is no clutch for the electric cylinder forklift
Battery forklift truck is no clutch, only the brake and accelerator accelerator, he's moving back done by several parts, the first thing to have a reversing switch control forward retreat, when switch forward, forklift electric controller, receive the signal, after the circuit conversion in the reactor, open the advance circuit, at the same time the throttle to adjust output voltage to the electronic control unit, adjust the voltage of electric controller output to the motor, done by the motor to go forward, when you back in front of the control is the same, just electric controller in the output to the excitation current and voltage of motor is opposite. The electric field in the motor changes and the motor changes. And then I fell back.
Q:A manual forklift oil leak, what if you can't get up?
Internal leakage (1) there is too much friction between the stem and the valve body Multiple directional control valve hoisting and tilt on the stem of each have three groove, groove and oil that can be switched on or off oil, change the way to work. Good distributing valve clearance between the valve stem and valve body is small, the spill is few, so the hydraulic cylinder down or tilt volume is small, do not affect work. But when wear clearance is too large, under the pressure of the hydraulic oil pump at work to produce, can cause work in oil or oil spill oil and the oil return tao, automatic back to the tank. The reason is mainly, because of the distributing valve use for a long time or the oil not clean accelerated wear of valve stem and valve body, such as destroy the sealing surface, lead to the oil. Repair if stem wear lighter, when to stem chrome plated finish; If the stem is worn badly, it needs to be replaced.
Q:4 tons of cross-country forklift lifts the four-meter cross-country forklift
Electric cylinder forklift: suitable for indoor or environmental protection Advantages: low noise, no exhaust emissions, easy operation. Disadvantages: high maintenance requirements, poor continuous working ability, high cost of high cost of materials. Choose different forms of forklift in accordance with your site
Q:What are some of the common failures of forklifts?
Forklifts cannot be started with the following conditions: 1, the battery without electricity Failure of starter The key switch is bad 4, the oil pump does not supply oil 5, there was no oil tank 6, no oil 7, the crankshaft lock The engine was completely scrapped
Q:What is a forklift for?
Selection of forklift brands on the market at present is numerous, complex models, together with the product itself technology is strong and very professional, so the choice of models, such as the supplier of choice is a lot of choose and buy the companies often are faced with the problem. This paper mainly introduces the selection of car, brand selection, performance evaluation criteria and the contribution rate of Chinese forklift truck overseas.
Q:What do you mean by the center spacing of the load on an electric forklift?
Another thing is that electric forklifts are generally balanced, which is used to boost goods. The standard three-ton electric forklift, for example, is fitted with a 1070mm cargo fork, and its payload center is about half the length of the fork, which is 535mm. If the length of the goods is within 1070, there is no problem of lifting the three tons of goods. But if the goods length is 1.6 meters, so the location of the center of the goods is in 0.8 meters, so beyond the electric forklift truck loading the position of the center distance of 0.535 meters, 26.5 cm, according to the lever principle, by this time if you have any 3 tons goods, so use this 3 tons of electric forklift is exhausting. It is possible that the rear portion of the electric forklift is lifted by the weight of the cargo.
Q:How do you tell if a forklift is retrofitted?
To identify whether the forklift is refurbished: The new forklift has only the sole manufacturer's certificate, which has engine Numbers, serial Numbers, production dates, and old forklifts. Look up from beneath the car, such as no sludge in the sag, paint thinner, door frame without wear and walk it sounds small, small gap control system, the basic is new. The most common thing is to look at the colour and shine of the tires, and the rear tire color and gloss are all dim. It is also possible to distinguish between the tread of the tread and the tread of the tread, and the new tyres are not as smooth as the new ones. Renovation tire tire body is compared commonly coarse, tire side have traces, a sign of retreaded tire are mostly to the poster, with fingernails scratching the logo, can pick off will be retreaded tire.
Q:What the forklift needs to be aware of...
The forklift truck is prohibited from taking the goods at high speed and forbidding the personnel to stand on the fork; When taking the cargo work, the personnel are not standing around the fork, so as not to be hurt. The driver should check the crane chain, the door frame, the cargo fork, and whether the bolt is firm. Check for fuel oil, lubricating oil, check start-up, operation, and braking performance. Check the light and sound signal to be fully valid and confirm normal restart operation. After starting the engine, listen to the operation of the engine and check the instructions of each instrument. When there are mechanical problems, you can't repair yourself. You should close the forklift and inform the mechanic. The driver should observe four weeks before the start of the forklift truck. The carrier will start off slowly and smoothly and make sure the cargo is stable and reliable.
Q:How do you start a forklift without a key
This is the electrician who needs to know! Short answer from ignition switch, if you don't understand, I can't tell you with words..

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range