The interlocking floor tiles are modular in nature. Hence, you can start the floor installation from any corner of the room. All you need to do is align the loops and snap them together. The tiles are designed to easily snap together with a loop-to-peg interlocking system. You can create a small floor mat for your car or you can use them to cover large areas such as a trade show, garage, workshop or basement.It is very easy to install.
Maintenance of gypsum suspended ceiling tiles :
1 Never step on the court with athletic shoes with nails and high-heeled shoes in order to protect the athletes from hurt; 2. Never knock on the flooring violently with sharp objects in order to avoid damages. 3. Never splash the corrosive liquids like sulfuric acid and hydrochloric acid on the flooring in order to avoid any corrosion. 4. Clean up the snow promptly after snowing; and do not let the snow pile up for a long time on the flooring in order to avoid affection on the use. 5. Rinse the flooring with water frequently in order to maintain the cleanness.
Main Product Features:
The main Material
PVC, Calcium Carbonate
It can be processed by drilling, sawing, nailing, planning and bonding and be in hot-forming, hot-bending and hot-folding and be welded and bonded with supplementary materials
Length: 6m,5.95m,4m,3m or customized
1) High shinny surface, smooth, without gap when concatenated
2)The variety of colors and patterns
3)High intensity, resist corrode, long life time, simple to maintain
4) Healthy and environment
10pcs/shrink fim/cartons or as request
6-8 days/20’fcl 8-15 days/40’HQ
Send a message to us:
Q:Gypsum board two faces which face up to install the ceiling
(1) modulation of one-component caulking plaster putty
The container used for modulation must be clean. According to the provisions of the proportion of the first clean water will be poured into the container, and then slowly to the water cast gypsum powder, let it swell 5min, and then stir the stir bar into a slurry without caking thick slurry, Modulation of a good pulp, can no longer add gypsum powder, so as not to agglomerate. Generally applicable to the construction time of 45min, more than time to start solidification, can not be used.
(2) Board edge treatment
The edge of the sheet is not treated, and the cut edge of the board should be treated as follows: Before the board is installed, gently press the front edge of the cardboard side and then use the knife Chamfer the side of the paper to pick the upper layer, and pick the open face paper torn, pay attention to the gypsum core can not be exposed, this part still keep the paper under the paper.
(3) capping process
With a small scraper will be stitched putty evenly embedded in the lower part of the gap between the joints, so putty squeeze the back panel side, to form a protruding putty along the mouth, so that the edge of the board with the stopper putty more firmly. Until the putty completely dry, with electric or manual sander, No. 2 emery will be slit plaster putty polished. And then with the entire paper gypsum ceiling decoration construction.
Q:Under what circumstances with two gypsum board ceiling
In theory, double gypsum board is considered to enhance the crack resistance and moisture resistance. Double gypsum board construction, to be full of polyethylene emulsion, double gypsum board really play a role. In the ceiling of the overall structure of the distortion, deformation will improve the intensity of anti-cracking. Add a layer of gypsum board and a single layer of gypsum board is the same effect of the final decoration, whether the top surface cracking is another factor affected by the surface of latex paint and other processes. As for the moisture resistance, single and double layers have a large gap, there are moisture into the ceiling within the gypsum board will absorb most of the water vapor, and then slowly volatile, does not affect the effect of surface coatings.
Q:The room ready to paste the wallpaper, the ceiling to be posted on the wallpaper? Gypsum line is also white, how posted?
Will not be uncoordinated, I did not do the top of the top, gypsum corners certainly not posted, I feel good, after all, I do the top of the very few posted, are generally a small part of the hotel restaurant reflector Only posted
Q:Can the ceiling ceiling be used only for gypsum board?
I agree with the recommendations of the home improvement company. Like your home improvement users, if the original ceiling is not smooth, will consider the use of gypsum board leveling, but the gypsum board to be used with light steel keel, but so your living room height will be greatly reduced, it is not recommended. In fact, many high-end hardcover residential, is the use of 20mm high keel with 9.5mm thick ordinary gypsum board for the ceiling leveling, your home improvement on the free bar.
Direct use of the ceiling, not beautiful, but also on the paint. With the surrounding shape of the ceiling, is also very good to see, but the proposed light to the simple atmosphere.
As long as the installation properly, try to use light steel keel instead of wood keel, there will be no danger.
Recommended brand: Lafarge, Jieke, can be resistant
Q:Gypsum board ceiling
Gypsum board ceiling is the primary attention to the problem of flatness of the ceiling, followed by the gypsum board joints crack. The requirements of the flatness is measured with two meters by foot, the error is not greater than 2mm, the main reason for affecting this indicator is keel, And the boom, gypsum board. Bucket is not vertical, the intensity is not enough, keel arrangement is too thin, the connection is not strong, etc. will cause the roof surface is not smooth.Cracking is mainly due to the use of seams and joints caused by improper, At present, the manufacturers are generally equipped with special seams
Q:Weak electrical room ceiling with gypsum board can
Weakness of the room can do gypsum board ceiling, it is worth noting that the ground material, the need to lay the electrostatic floor!
Q:Wood keel gypsum board ceiling price is the number of a flat artificial?
20 to 30 yuan a square meter
Q:Ceiling mounted ceiling lights, online and so on
The heavy quality of the ceiling can be directly fixed on the ceiling, but not fixed on the ceiling of the gypsum board, is fixed in the gypsum board behind the wooden keel, behind the wooden keel to ensure that is affordable, too heavy light It is necessary in the ceiling before the closure of the original building on the top of the expansion bolts, or with angle racks, or hanging with a chain chandelier, can not hit the wooden keel.
Q:What is the optimum thickness of the ceiling ceiling in the interior design and the best distance from the top surface?
Each design has its own style. Under normal circumstances: the ceiling of the home improvement will be designed according to the size of the beam, usually from the bottom of the beam, up 50 ~ 100mm or so began to do the ceiling, some relatively short beams can be in accordance with the actual pull the ceiling beam, or more Come down. Light tank empty part of the general: 60 ~ 200mm or so, 120mm is more commonly used. If you want to angle, please stay 100mm ~ 120mm or so, if there is no angle can do a little smaller: 80mm on it.
Q:6 square kitchen, with integrated ceiling, or with aluminum buckle board good?
Identify the method of integrating the ceiling:
A: Look: the inferior buckle surface looks rugged, and there will be particles. The quality board looks very flat and the panel is softer.
B, smell: the lighter with a lighter plate of the corner, 30 seconds will be charred, and the smell of plastic scorched scorch, roller anti-oil even if the burning of the sun will not have a pungent odor.
C, touch: the temperature of the film board is the plastic temperature, so relatively high, to warm a little, roll the temperature of the board is the temperature of the metal, to cool a little.
D, listen: hand cover the corner of the panel, gently knock on the center of the panel, the film board sound boring a little, rolling the sound of the board crisp.
E, scraping: the difference between the roller and the board is good or bad, poor roller coating in the bending out there will be a slight burst, hand scraping the surface layer will be scraped off, a good buckle will not.