1. High Quality : our products are 100% handmade. thickness tolerance is less than 0.1 to 0.5 mm.
2. Multicolor: A piece of the ceiling can paint five colors. our products can painted about 200 kinds of colors.
3. Sound Attenuation: sound attenuation is 32dB.it is able to lower noise inside.
4. Moisture-proof: It can be very good control indoor air humidity adjust the indoor humidity and increase comfort.
5. Long Service Life: We put the glass fiber inside.It can make gypsum ceiling deformation, high strength, wear resistance.
6. Varied Choices: The sizes can be changed from 600 * 600mm, 595 * 595mm to 603 * 603mm. We have different thickness for 9 to12mm. Its colour is white & colorful or according to the customer's requirements.
7. Excellent In Appearance : combined with many fashion colors ,making good tmosphere, natural, harmonious,luxury,or high artistic effect.
8. Sell Well: Our factory is a manufacturer of building materials with a history of more than ten years. Our products Sell well both at home and abroad.
9. Widely Use: It can be used for partitions, interior walls, pipeline and conduit compartments, stair space, exterior walls, ceiling boards and pillar wrapping.
Terasun Silicate Magnesium Board---TSM
Foam particles, cement, plant fiber, glass fiber cloth, non-woven fabrics, etc
≤ 0.95 g/cm³
1220*2440mm or 1200*2400mm Customerization is available
Fire Rating Test
Class A1 incombustible material
≥ 8 Mpa
Maximum Service Temperature
No water vapor after 24 hours' test
Linear Coefficient of Thermal Expansion 20~750 °C
Permanent Linear Shrinkage
Coefficient of Thermal Conductivity
Loss in Ignition (1025 °C)
Features / Merits
Waterproof; fireproof; termite proof; light-wight; flexional; easily to be shaped, perforated, bended; long service life; environmental friendly, etc
Interior&exterior wall board; ceiling board; suspended ceiling; free access floor; desktop board; sandwich panel; kitchen and bath wall board; decoration, etc
Terasun gypsum ceiling decoration---TSM especially suits to grand exterior&interior wall, ceiling projects of office, conference room, hotel, hospital, plant, lab, commercial center hall, tunnel, subway, airport, warehouse, etc.
- Q:How to make a gypsum cornice for a room ceiling with slope about 4 degrees?
- you obviously can't without something looking odd the cornice is meant to fit in the corner you can't make the ceiling look straight with it you would have to pack it down one end to make it level that means one end would be 30cm lower than the ceiling it would look ridiculous the ceiling is the only thing you can do to level it up fit the coving as normal and it won't look as bad as trying to mess about with it I have done miles of the stuff and sometimes people can't afford a new ceiling so this is the best way at least it looks neat in the corner where it should be
- Q:How to use half water gypsum to make ceiling cracks
- Gypsum board ceiling cracking repair will crack.
In the installation of gypsum board, if there is no installation specifications from the middle to the four sides of the screw, but from the four sides at the same time on the screw, then the gypsum board will produce stress, if the stress is large enough, will cause cracking; Gypsum board screw spacing is too large or some screw position, although correct, but if not fastened, will lead to cracking.
- Q:Integrated ceiling and gypsum board difference
- First, environmental comparison:
Gypsum top is difficult to achieve the perfect combination of personal effects and environmental health, because: as long as the paint will have "toxins" - formaldehyde, and gypsum ceiling no matter what kind of, even the most simple white effect, The use of Paint to complete the final decorative effect, which is the consensus in the decoration process, so the gypsum ceiling environmental health is very difficult to satisfaction, if you want to do other colors, we must use the paint, the "harm" on More, Its formaldehyde content index is even more worrying.
As a result of a recyclable green metal, does not contain toxic substances, and we deal with the aluminum itself, such as surface color, etc., are completed in the factory, the site construction is only Installation Of the program, do not need any auxiliary procedures will be able to complete, fully able to achieve environmental health standards.
Gypsum board installation waste can not be recycled, integrated ceiling installation of the next corner material can be recycled.
- Q:Is there a need to get a plaster line?
- The role of gypsum lines is beautiful, the bedroom is certainly not used, the living room, then you can consider, this is mainly based on the economic situation to decide, installed on the grade of certain, gypsum line is decorative lines, but for the beautiful;
- Q:My family living room ceiling on the fixed gypsum board did not hit the tapping screw how to do
- Construction reasons: A: ceiling construction is not smooth, mainly keel height varies, causing the gypsum board cracking. B: screw fixation is not standardized, mainly the depth of the screw is too deep or too close to the edge, causing the gypsum board after damp down, deformation cracking. C: gypsum board through the slot to install, easy to produce cracks (between the board and the plate field patchwork). D: the main dragon, vice-joint in the same horizontal position, prone to cracking or local sagging. E: gypsum slit joints unreasonable structure: man-made damage to the edge of paper and cutting edge (for the increase in slitting with art cutting). F: The main keel connection should increase the boom. 2, the choice of material factors Seam material selection in the construction of the dominant role, the majority of improper selection or their own preparation caused by cracking.
- Q:Can the bathroom be covered with gypsum
- Can not be gypsum ceiling fear tide toilet water vapor too long a long gypsum board will be tide cracking deformation proposed landlord to PVC or integrated ceiling look a lot of now
- Q:Decoration with gypsum board ceiling joints need to gap, generally stay much
- Wood keel spacing
1, with the horizontal tube to find the level of the point, with the ink bucket along the horizontal point of playing the horizontal line;
2, light steel keel: wood keel for the edge of the dragon, the lamp slot position with wood keel or woodworking board production, there are wood production office to brush fire paint, keel at least 50, spacing 30 cm is appropriate, hanging spacing 60-80 cm Is appropriate, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines;
3, wood keel: keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, hanging bar is strictly prohibited direct use of wooden wedge nails to the top, brush tight fire paint until the wood keel color can not see , The keel on a layer of full-legged rice eucalyptus core 9% board and then on the gypsum board, gypsum board and board between the people to set aside 5-8 mm gap, gypsum board self-tapping screws 1-2 mm and do Anti-embroidered treatment, to be smooth and solid, shaped to do smooth lines;
4, aluminum plate: strict requirements level, light steel keel bayonet to be aligned, keel spacing of 50 or less, hanging spacing 60-80 cm is appropriate, the board when the hand to light, so as not to press the board to the pit And the contact with the tile is not tight to use the sealant to play tight;
5, aluminum-plastic plate: wood keel at least 3 * 4 or more, spacing 30 cm is appropriate, hanging spacing 60-80 cm is appropriate, brush tight fire paint, keel on a layer of full-legged rice eucalyptus core With a universal adhesive paste aluminum-plastic plate, aluminum-plastic plate and the board between the reserved 3-4 mm gap, has been filled with other colors to play the effect of grid, to be smooth and solid, shaped to do smooth lines , The angle of the fold surface can not be broken.
- Q:Surrounded by the ceiling
- This is the use of gypsum ceiling. Directly to find carpenter master can do a good job. And then buy back the lights to find electrician master installed on it. Now you can use the integrated ceiling hanging. Just the price is more expensive.
- Q:Gypsum board styling shed, with a straight shape of the ceiling What is the difference?
- If it is gypsum ceiling, it is not the same. It is usually 600 * 600 specifications, with protruding patterns, with 38 main bone and T bone assembly.
- Q:My house is a rural self-built room, would like to use the second floor of the ceiling with light steel keel and gypsum board ceiling
- Do not contain furniture, should be 35,000 yuan, if the brand are good with. In the 45,000 yuan, if even the main electrical materials, then 10 million, even the furniture in the inside to 15-20 million
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range