Glazed Porcelain Tile Sandstone series SA60E

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Glazed Porcelain Tile Sandstone series SA60E is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening.

 

Product Features

 

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

 

Production Line & Package 

Glazed Porcelain Tile Sandstone series SA60E

Glazed Porcelain Tile Sandstone series SA60E

 


FAQ  

                 

    1. Q: May I have my own design?

      A: Of course. But the pictures or samples of the products should be offered by your party.

    2. Q: May I ask for some samples?

      The samples are free. You just need to pay for samples’ courier cost.

    3. Q: Can wall tile be used on the floor?

      A: Not in most cases. Please check with your installer or YIJIANG for application recommendations.

    4. Q: Can floor tile be used on the wall?

      A: Yes. Exterior applications require special precautions and installation methods. Please check with your installer.

    5. Q: What are your payment terms?

      T/T: 30% deposit and the balance should be paid before loading to container.

      L/C: L/C AT SIGHT.



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:ceramic tile question?
Hi If you are replacing 1/2 your living room carpet with ceramic tile. What are you doing with the other 1/2? I wouldn't use ceramic tile in my living room.1 resale value. 2 . It's cold on the feet. 3. The looks doesn't sound appealing.
Q:tiling with 16x16 tiles in kitchen that is 14x22?
Tile and use almost as a regular thin set. Flexbond like any stronger thin set will tend to set up a bit faster than standard thin set . This because of the added latex in the thin set. Mix a bit less than normal. Mix and let set for 5/10 minutes and mix again, being very important when using extra modified thin set. Although this is a stronger thin set and will bond to ply wood. But the minimum substrate thickness must be met to be able tile tile over. Any questions you can e mail me through my avatar and check my qualifications there.. GL
Q:What is the best way for me to lay a tile floor on a concrete subfloor with vinyl tiles?
If a homeowner asked me to lay any kind of tile other than vinyl over the top of vinyl I would not warranty anything. The non vinyl tile will be adhered extremely well with the thinset to the vinyl tile, however, the vinyl tile, while it's stuck to the concrete, does have movement. If the sub floor moves something in the thinset, grout or porcelain/ceramic tile will have to give. If the thinset gives your tiles will come loose. If the grout gives you will spend the next 15 years replacing grout once a month. If the tile gives you will have cracks in the surface of the tile that creates a sharp edge to cut your feet on. Or a combination of the three. You must remove the vinyl. You can purchase a removal tool at Home Depot for a couple bucks. You can also get a day laborer that you will have to watch but will do the work for you for probably $75 or so. Once you have the tiles up and the floor cleaned (you don't have to be neurotic about the cleaning as the thinset will float over some things on the concrete) you'll need to inspect for cracks in the concrete. If there are cracks you'll need to purchase a crack mitigation kit. You can find them in the tile section of Home Depot. You'll need the package as well as the primer. There are instructions on the package but basically you cut the stuff to fit with a utility knife. Paint the primer on the floor and let dry as per instructions. Paint on the glue and lay the material over the glue. Let dry as per instructions and you're ready to tile with no worries about cracking tile.
Q:Does all kinds of tiles calculate the formula per square meter?
Really dizzy I was selling tiles 30 * 60 is now very common This is the iron wall used, no matter what kind of specifications, you just 1 by (side * wide), into the meter unit. 80 * 80 = 1.56; 30 * 30 = 11; 30 * 45 = 7.4; 60 * 60 = 2.78; 30 * 60 = 5.56. But according to square down, not enough, will almost, will be a waste.
Q:Remove/Seal Old Tile Glue in Kitchen?
If you are going to install any type of self stick or glue down tile the floor has to be completely smooth underneath. If not you will see ridges and grooves all over the floor. Go to your local lumber yard or tile store and get adhesive remover to remove the old glue. Then you are going to want to fill in any cracks, seams or low spots in the sub floor with 'crack fill' and sand the repairs smooth. Then seal the sub floor with a primer made for the type of tile you are going to put down and install the tile according to the manufacturers recommendations. Good Luck.
Q:Tile 60 * 60 price
More than a dozen dollars out of a cup, there may be cracks in the brick, we have just submitted a few tiles are installed more than 50 pieces, feeling like general, the brightness is not high, the decoration to see the budget, Yuan to hundreds of dollars, you can choose a lot of.
Q:Our newly installed tile back splash looks wavy.?
Spacers keep the gaps between tiles uniform - they don't affect the height of the tile with respect to the wall. A good installer would absolutely use spacers on a vertical surface, as the setting compound, like most concrete and concrete-like material, behaves like a gel; it becomes rubbery and remembers where it was before you push on it. One can watch a misaligned tile slowly slide back almost into its original position after attempting to straighten it out - it MUST be held stationary for a minute or two, and since most tile setters don't want to hold a single tile for that amount of time, they use spacers to do it for them. If there are only a few tiles that are particularly bad, make him remove and reset them. Hold a straightedge against them and take a picture of the job. Then if he balks at fixing it, you could ask if he'd like to see what a small claims court judge might say about the need for payment (or the return thereof). Nine times out of ten, the contractor will fix the problem rather than deal with court.
Q:Tiles 1 open 2 What does it mean ah?
One or two is that the original is 800 * 800 mm it is divided into two halves it
Q:How to fix just one flooring tile?
you can pick up a small tile saw at any tile /flooring outlet.it has a serrated edge for cutting into the grout that is around the tile.once you have removed the grout you should be abel to insert a wide blade putty knife under the tile and tap it in easy to loosen the tile once it is free clean the area of any adhesive and reset the tile.it is a shame that the co who did the install refused to come back and do the repair.if i were you i would file a complaint with the better business bureau in your area.good luck
Q:What is all porcelain called semi-tiles
First explain what is all porcelain what is semi-porcelain All porcelain: firing temperature greater than 1200 degrees embryo body water absorption is low, after the extension of the rate of low embryo clay and semi-porcelain different porcelain process for large pieces of tiles such as 800 * 800MM, 1 m * 1 m tiles The reason is related to the mold, simply said that the whole porcelain manufacturing large tile cost is relatively low if the manufacture of small pieces of tiles, then the cost will be high Semi-porcelain: firing temperature less than 1200 degrees embryo body water absorption than the whole porcelain slightly higher after the heat after the elongation slightly higher embryos and all porcelain due to the cost of the problem if the small pieces of wood tiles or other small pieces of ceramic tile The cost will be very high so that the ceramic manufacturers in the country did not do a few small ceramic tile all the time to do even the export because few people in the country to buy small pieces of all-ceramic tiles

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range