Glazed Porcelain Tile Sand Series SA60A/60B
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile Sand Series SA60A/60B is one of the most popular color of Glazed Porcelain Tile Serie, which is one serie of Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas.
Product Features
Glazed Porcelain Tile,
Only Grade AAA available
Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Competitive price
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 85 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl
Production Line & Package
FAQ
1. For Polished Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.
4. Why choose our Floor Tile?
1). Less investment and shorter lead time because we ship tiles directly from Factory.
2). Better ETD and more stable price bacause we keep abundant stock for future needs.
5. What's the characteristics about porcelain tiles and glazed tiles? Which one
more slippery, more aesthetically pleasing and easy to clean?
Glazed tiles are colorful, the effect is rather diverse, stain-slip, abrasion resistance but worse than the porcelain tiles. Long-term use may wear a large surface; porcelain tiles have the higher degree, long hard wear surface. Good performance and stable cleanup (before playing the best times to use the wax to improve stain resistance). The porcelain tiles are weaker performance in non-slip than glazed tiles. We should take attention on its anti-slip properties, face down in a tiled brick water testing.
6. How to choose bathroom tiles? Porcelain tiles or glazed tiles?
Currently used in the bathroom tiles with glazed tiles (mainly from price considerations, some high-end can choose tiles, notice to choose tiles).
- Q:We have a two sink bathroom set up would like to replace the counter-top with a homemade tile counter-top - we are pretty handy but have not dealt with tile before - and before I ask my dad for help I thought why not check out yahoo answers. Thanks! :)
- Want you like to get instant access to over 16,000 woodworking plans? Check it out https://tr.im/4abb1 Along with stone, mud and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.
- Q:I think the thinset under some of my ceramic tiles is crumbling. I have a concrete slab floor and it involves about 12 tiles between my kitchen and dining room. The grout and tiles have not cracked yet, but how would I fix the thinset without breaking up the good tiles?
- It's rather difficult to diagnose the problem without seeing what is under your tile. It could be that you had a thinset failure, or perhaps you have a moisture problem within the slab. I would try and take up the full tiles where you hear the crumbling. It is possible that you allowed traffic on the tile too soon after setting. The concrete might have not been cleaned well enough prior to thinset application, thus thinset bonded to tile but not to slab in this area. Pull up some tile and write back with what you found out. I would bet the thinset is bonded to the tile, but not to the slab.
- Q:I need matching vinyl tiles for my kitchen floor. they‘re about 18x18 inch. I only need about 6 of them. is it possible to have a company match the design of tile and custom make me new ones, or a company that can match them?
- Vinyl tiles are very cheap, maybe you should consider redoing the entire kitchen floor instead of trying to match up discontinued tiles. But I know that if you bring a vinyl piece into a flooring store, they will try to match it the best as possible, and give you something very similar. Re-doing your kitchen floor with new vinyl won't cost much, and it's what I suggest.
- Q:my bathroom has brown tiles that i hate i bourgh white and stone tile paint there rubbish can i use another paint what kind i cant re tile landlord wont let me so need help
- I think painted tiles always look a bit dodgy, unless you really really carefully paint each individual tile and not the grout (which is a PAIN). You can get tile decals though to stick over them, which although not as nice as retiling usually looks ok.
- Q:I have a few small pits (about 1/16 in diameter, very shallow into the tile) that have developed in some old ceramic tile in my foyer (it may be from some salt that was tracked into the foyer over the winter). Is there a good way to repair it?
- I would try 'tile and grout sealer. These products are easy to apply and once dried are very hard. Go to your home supply store and look at a few different types and see what would work best for you application. Most people don't understand that tile needs to be sealed and re-sealed every year or two, especially in high traffic areas and where there will be a lot of dirt or water track across them.
- Q:I‘m installing 13 x 13 cermic tiles. We‘ve laid the tile to try to configure the best layout. However, the one with the best layout with the easiests cuts leaves one very complicated one. The tile lies directly on the air duct, with the cut being a large rectangular hole in the middle of the tile. If we adjusted the layout to have 2 tiles lay over the duct, it creates more complicated cuts everywhere else.How do you suggest I cut this tile?We have only a wet tile saw.
- you can use a diamond tip drill bits for drilling holes for tiles. or you can try this trick i've learned from my workers. place masking tape over the tile and mark the spot to drill. set your drill on drill (not on hammer) using a new (sharp) masonry drill slowly drill through the tile. use a tile cutter to cut your way through the hole. this will take some time but you'll save money, time if your only doing 1 tile, however if your going to do lots of drilling better get a diamond tip drill bit. you can also use the angular grinder with diamond disk cutter for 2 or bigger holes. again cover the tile with masking tape. use safety quipment for this. wet saw tile is ok for the layout, go for aesthetic or visual outlook of the tile not the complicatedness of installation, it must look good for you to be satisfied.
- Q:hi i live in a upstairs flat,and i want to tile my hall with ceramic tiles,i did a square 4 foot patch to see if the tile would stick or would come loose,well they did come loose,so how do i prepare floorboards for tiling over so the grout wont crack when i walk on the floor thanks
- You can, but it's a gutsy try. Hardwood flexes, expands and contracts with temp. humidity and wear. Those are things you DONT want when setting tile. If you really really want to try this without removing the hardwood, it will take some money and time. First like others above mentioned, find a cement backer. Hardibacker and Durarock are brands sold at Home Depot. I would recommend getting the thicker 1/2 sheets as that will help dampen the flex. Then you will want an anti-fracture membrane to coat the backer with. This stuff helps allow the floor to move (slightly of course) without cracking your grout and popping tiles. Next buy a heavily latex modified mortar. It usually has a higher psi strength and also allows for some give. It's more expensive, but it's cheaper than doing the job twice. I'm personally a fan of TEC's SuperFlex mortar, but every tile guy has their favorite. When you go to actually install the tile (after the backer is in and the membrane is dry) use a deep trowel. In these situations, I use a 1/2 trowel. Spread the mortar evenly, and place each tile with the same amount of pressure. This will save time trying to keep the tiles level. When grouting also find a latex modified mix for it as well. Use that stuff instead of water. Hope this helps and you actually read the whole thing. I didn't mean to write a book.
- Q:I am looking to either repair my flat tile roof or replace it for a shingle roof.
- hndsmenmiami: It depends on the condition of you existing roof. Tile, in general, adds more value to the home. Having said that, I have seen some existing conditions that are bogus and need to go. For example: if your tiles are fastened to the roof with mortar only, and no mechanical fasteners, the mortar begins to seperate at some point, and during a storm you might produce deadly projectiles of tile from your roof. There may be underlying conditions of poor flashing and/or rotted wood that are not visible to you, but can cause big problems. I know an awful lot of people that are scrapping the aging tile roof in favor of shingles for matters of soundness, safety and cost. But I can't see your roof from here, my friend, so you will have to make the call!
- Q:for diferent size tiles are there standard grout joint sizes
- It depends on the size of your tile. A lot of 4.25 inch tiles have spacers built in. When you put the tiles in it will give you a 1/8 in gap for you grout. I use 1/4 inch spacers when installing 12 inch tiles.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Glazed Porcelain Tile Sand Series SA60A/60B
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1267.2
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
