Glazed Porcelain Tile DUKE Serie Mustang DKMU24
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1105.92
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Glazed Porcelain Tile DUKE Serie Mustang DKMU24 is one of the most popular color of DUKE series, which is one serie of Glazed Porcelain Tile in our portfolio. It could be used for interior floor for apartment, villa, super market as well as other public areas, due to its anti slippery.
Product Features
Glazed Porcelain Tile, Color Body
Only Grade AA available
Strict control on color shade, deformation, anti-pollution as well as packing
Competitive price
Standard export packing: Pater Carton+ Plywood Pallet
Fast delivery
OEM service could be offered
Marketing support on samples, catalogues as well as carton designing
Professional sales team for product, document and schedule of importing and exporting.
Product Specification
Tile Type: Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: ≤0.5%
Breaking Strength: ≥ 1300 N
Rupture Modulus: ≥ 35 MPa
Length and Width Tolerance: ±0.5%
Edge Straightness: ±0.5%
Slip-resistance: From R9 to R13
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, 32 Ctns/Pallet, 768 Ctns/20’Fcl, 1105.92m2/20’Fcl
Production Line & Package
FAQ
1. For Glazed Porcelain Tile, is the 30*60 available?
—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 8 pcs are packed into one carton.
2. What is the MOQ for this tile?
—— Normally the MOQ is 1105.92 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers.
- Q:therefore creating a gap in the center of the wall for grouting... or tiling one tile and grouting it with the gap at the wall and the next tile side putting a grout line down that way
- I dont get it........
- Q:would it be to hard for me to do by myself and is there an adhesive that I put under the tile?
- Carpet tiles are easy to install. Some even come with their own adhesive backing. You will need to begin with marking out the center of the room and squaring it to make a + so you can set the firs four tiles down and work outward from the center. Once you have marked your + do a dry run and make sure you don't end up with a large chunk of tile on one wall and a sliver on the other. If that happens, shift the center mark toward the shorter edge. Once you have done the dry run and you are happy with the results you can stick them down. Good luck
- Q:What are the external wall tiles?
- At present, there are many general models of home improvement wall type 60 * 200 165 * 165 150 * 150 200 * 200 several specifications you want to see your home use area is probably how much style is what kind of ability to determine what kind of specifications External walls
- Q:Is it hard to fit tile around the toilet? Should I start there first?
- it's not hard to do but you have a little bit of cutting to do. to start with the peel an stick, i would start in the middle of you doorway to the bathroom and go straight across the room( you want full tiles in front of the door) and leave cut ends to the one side. once you get that line across and use a laser line if you have one, everything else is smooth sailing... before you put the peel and stick down... what do you have on the floor now? if you have other tile down, i would not put new stuff over top of it, it usually don't stick right, try putting a thin sheet of plywood down or(i believe it's called mahogany) you can buy thin sheets of this. put it down first and then tile. it's a little bit more work but it's worth it, cost less too if your not replacing in a few months too. Have fun, it's easy, i did mine first try!!! :)
- Q:The bathroom tile in my recently purchased house isn‘t finished. The previous owner used floor tile to surround the tub; he/she left many pieces of tile unfinished, but luckily left us a stack of the tiles so we could finish it off. However, we don‘t have an unlimited supply of these tiles, so we‘d like to get it right with as few tries as possible!I‘m wondering: -I need to fit the tub faucet and knobs within two 12 square tiles. What‘s the best way to measure the placement of the fixtures? Is it possible to make some sort of template that I could transfer to the tiles? -Can I make the cuts for the fixtures using a hacksaw-type tile saw blade, or should I buy a tile drill bit? (I realize it rather depends on where the fixtures fall within the tile-- but if I don‘t need to buy both, I won‘t waste my money. )Thanks!
- If you are trying to use floor tile on the walls, I would go to a tile store and have them make the cuts you need (use a grease pencil to mark the tiles) the two methods described in the first two answers can help you. but if you have ever tried to cut floor tile with one of those hacksaw tile blades you would know that it is VERY DIFFICULT, wall tile cuts no problem but floor tile is much tougher. also if you know where they were purchased they may cut them for you for free.
- Q:Should i tile right to the sub floor. Or do i leave room for a baseboard? or do i put the baseboards over top of the tile and glue them on?
- Baseboard goes on top of the tile. The tile doesn't have to run clear to the floor, but does have to come down far enough to be covered by the baseboard. Then you will have to shim the bottom of the wall to keep the base from tilting. This will leave room for nailing without hitting the tile. If the tile runs all the way to the floor, place your nails so they are going thru the grout line in between the tiles.
- Q:I have a basement about 25X25 does anyone know how much it would cost to put vinyl tile down?
- What I did, was pull out the Yellow book, and called, compared prices, and see what they would do. ESPECIALLY, if you mention their competitor down the road, that said he'd install if for cents per square. Best least expensive way, is to go to Home Depot, get the guy in that dept... and see. I had mine professionally done, nothing like it in the world.. but do it yourself, is 'user friendly' today. Love the newer hard wood laminants, and tile ( look real!)... You get what you pay for. Go in the middle, and your are safe for the wear value. That I do know.
- Q:Someone told me its called tile- something) I know it has a nic-name, do you know it?
- Tile Row. It's on State College right past Anaheim Statium. My favorite tile store: Ed Pawlack Tile 601 W Lambert Rd. Brea, CA 92821 714.529.2364
- Q:I have 12x12 tiles in my kitchen on the floor and about 5 of them are cracked/damaged. How hard is it to replace them, can I do it myslef or hire a professional? What materials will be needed?
- It's very hard to match the tiles. Also you will have to remove the grout around each broken one, and then crack the broken one into pieces, then remove clean the surface, apply adhesive, and then the tile, and then grout. The color of grout will never match up 100% and neither will the tile. Also it will take you a good part of the day. Good luck with your project!
- Q:I‘m thinking about having a bathroom tiled. The bathroom is about 6 by 8 and right now the walls have a horrible pink and black alternating ceramic tile that goes up about 4 feet on the wall all the way around. All I want to do is replace this tile with a glass tile. I have no idea what the cost would be for materials and labor so any estimates would be appreciated. This is the only work I need done.
- If you live near a Floor Decor Store, you should be able to find a decent glass tile for around $2.00/ square foot. Now, assuming it is on all four walls covering every bit of those walls, 4 ft. high, that would be about 112 square feet. Plus, you always need to buy around 15% waste. So, total you would need to buy 129 square ft. of tile. You also would need Mastic to put the tile on the wall, should cost you $50 or less for enough to tile the area you have. Labor should run you about $500-700 for the removal of the old tile and installation of the new tile. There is however one issue you might not have thought of. If you remove the old tile, it will most likely destroy the walls it is attached to. From the way it sounds, this is old tile that was installed using something called a mud bed. This is basically metal wire and weakened concrete. All of this will have to be removed and new sheet-rock or green board will have to be installed. The cost of this would run you another $600-800 in labor and materials. So your worst case scenario, would run you around $1800. If you happen to be in the Atlanta, I would be happy to take a look at the job. I have 10+ yrs. experience as Home Depot Certified Flooring Installer
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Glazed Porcelain Tile DUKE Serie Mustang DKMU24
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1105.92
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
